High end RTAs
- Thread starter Yonjuro
- Start date
- th_trl_thread_readers 0
- Status
The 1x1.5 is an authentic M2L draw, real old skool! I just tried a D2L nearly popped an artery so you might want o get one of the others instead or as well as. the 3x1.0 is ok for very restricted d2l - think pico on 2 holes...
Very well put buddy
Excuse me whilst I copy and paste that into my video notes [emoji23]
haha!! Glad some of the crap I post is useful
Another thing that had just occurred to me is that I can see people hovering over the order page at ESG adding and subtracting these things as their mind changes. It might be that too much choice is a bad thing here given the relatively small differences between the options. I mean you have all 10 of the little buggers - what on earth are you going to do with them all?!?!
....and just for kicks here are the total AF sizes for each one. The slots are approximate as I havent accounted for the rounded ends but there is some redundancy on the sizes as you can see although slots and holes with the same total area might vape a bit differently (but i doubt anyone could tell the difference..). Yeah I'm sad I know...
1.8 mm^2
2.4
3.6
4.6
5.3
~4.5
~5.4
~6
~7.2
~10.8
1.8 mm^2
2.4
3.6
4.6
5.3
~4.5
~5.4
~6
~7.2
~10.8
Thanks buddy, sounds a bit tight then, probably like the kfl?
Sent from my SCH-I545 using Tapatalk
Closing down the air flow is definitely not the same as using one of those discs. The end result could be the same in terms of the draw but the flavour will be certainly different.
I do think they overdid it with the amount of options though and the price.
I do think they overdid it with the amount of options though and the price.
Ok, found a bit of time to plug in the new skyline deck
Obviously it is very similar to the old one. The wick well around the coil is a bit roomier and the juice channels are now v-shaped so you have a bit more JF at fully open for example - good for bigger builds. I slapped in the 1x1.5mm adaptor thingy and thta is what will remain there. It is pretty much a perfect draw for me now. I put in a 8/7 27g NiFe48 build around 2.5mm microcoil, around 0.3Ω and wicked her up. The vapour production has improved a lot, partly due to better juice flow and partly dude to the fact that my last build must have been a bit off lol! Overall really good and has taken it up half a notch further for me so happy i went for it. Whether it is worth it for most people I'm not sure really but it is an improvement for sure! The little ledge of PEEK poking out front in the second image is what the removal tool grabs onto!!
ps. if @Mark Todd is going to review all 10 inserts he will have his work cut out. No way of removing with coil in place lol!
View attachment 638713 View attachment 638715
Great stuff, I think you and I are like @Mark Todd and Damian - battling to see who gets to review first
My set arrives on Tuesday due to a public holiday here on Monday
nah...we are much better than them haha! Do you have eitherGreat stuff, I think you and I are like @Mark Todd and Damian - battling to see who gets to review first
1. a shed and a lovely dog
2. Long hair, beard and 'tache combo, woolly hat and a dodgy cockney accent?
ps. and OT but if you want a good laugh, check out Damian vaping Gouda-flavoured juices on the last "bloody good waffle'...superb!
nah...we are much better than them haha! Do you have either
1. a shed and a lovely dog
2. Long hair, beard and 'tache combo, woolly hat and a dodgy cockney accent?
bahahaha
1. Yes
2. Bald with a dodgy Aussie accent
a photo from when I left my daughter and dog alone for 5 minutes this morning
bahahaha
1. Yes
2. Bald with a dodgy Aussie accent
a photo from when I left my daughter and dog alone for 5 minutes this morning
View attachment 638819
Ok, that means I need to get a wig, grow a beard and try practising the old cockney dahn the rub-a-dub before a nice ruby..
(I will translate if necessary)
PS your dog is adorable!!!
I think I'll leave the vid channel stuff to the experts - my reviews would go for around 5 seconds "this is crap" or "this is good"
Thanks for the comment on my husky, his name is Ronin
I'm with you on that one. That style of review would certainly be unusual (but probably as informative as most of the reviews on YT)
He is awesome and a great name for him. Husky my favourite breed but i bet they need a lot of looking after in terms of exercise etc! worth it though i bet!
He is awesome and a great name for him. Husky my favourite breed but i bet they need a lot of looking after in terms of exercise etc! worth it though i bet!
Thanks mate
They are certainly not a dog for everyone - I sled race in winter with him and swim with him in the summer so he is happy which makes things very easy But yeah, you need to put a lot of work in when they are young to make life good. They are way too smart to be totally obedient - you have to work wit them as a partnership rather than a dictatorship
I'd love to try sledding. It's on the bucket list but not a popular travel option in north london...Give him a good pat from me!!Thanks mate
And that is why you should do reviews, you don't take it seriously, the #1 rule in my book [emoji3]
Skydeck arrived today - yeehar
Short review - Buy it - it's great !
Longer review...
I am very impressed, makes an awesome RTA even better. The new larger well and juice holes really make a difference. Prior to the new deck I always had the JFC fully open, now I can adjust to suit my juice and build, rather than an 'on or off' which it basically was before (for me)
With the air discs being Peek - I would err on the side of caution and have at least 2mm between the bottom of your coil and the disc. I have seen a Peek AF melt on a different atty when it was too close to a bigger build.
I started with the original MTL deck - which I was finding a bit restrictive for how I prefer to vape these days. I tried my first Airdisc which is the biggest of the 4 I purchased (1.5 x 4mm slot) This is good but possibly a little too open for me. I will look forward to stepping down with my next build.
Having the wire hole heights different on the posts is very clever and makes inserting the coil even easier - assuming you wrap you coil in direction that makes the leg correspond to the wire holes to take advantage of this feature.
So, all-in-all I am very impressed !
The Hussar still has the edge in flavour intensity for me, but man, the new Skyline is a silky smooth and flavourful vape.
PS. If someone is a real DLer you could probably try a big build with no air disc inserted ??
Short review - Buy it - it's great !
Longer review...
I am very impressed, makes an awesome RTA even better. The new larger well and juice holes really make a difference. Prior to the new deck I always had the JFC fully open, now I can adjust to suit my juice and build, rather than an 'on or off' which it basically was before (for me)
With the air discs being Peek - I would err on the side of caution and have at least 2mm between the bottom of your coil and the disc. I have seen a Peek AF melt on a different atty when it was too close to a bigger build.
I started with the original MTL deck - which I was finding a bit restrictive for how I prefer to vape these days. I tried my first Airdisc which is the biggest of the 4 I purchased (1.5 x 4mm slot) This is good but possibly a little too open for me. I will look forward to stepping down with my next build.
Having the wire hole heights different on the posts is very clever and makes inserting the coil even easier - assuming you wrap you coil in direction that makes the leg correspond to the wire holes
to take advantage of this feature.So, all-in-all I am very impressed !
The Hussar still has the edge in flavour intensity for me, but man, the new Skyline is a silky smooth and flavourful vape.
PS. If someone is a real DLer you could probably try a big build with no air disc inserted ??
Yeah Idk about those disks, maybe if they were ultem? Peek is temp resistant but it def will burn and give off fumes. Usually fine for insulation though.
PEEK mp is around 350C and it is supposed to be fine in constant exposure to 250C. Unless you have a major dry out, or dry burn coils very close to it, it should be fine i think!
- Status
Similar threads
