homemade atomizer bottom feed

[hildicat]

Any thoughts? I would like to pull the trigger on this


-Sam

not sure if those have a ceramic cup, but also don't know if that'll make a difference. These are the ones i got.
http://www.ecigexpress.com/cartridg...romizer-5-pack-for-510-ego-select-color-p-796

 

[MXBNW]

I thin most if not all the CE attys would work.

I got a lot of the old ones kicking around here that if this works out well will finally get some use

Any thoughts? I would like to pull the trigger on this


-Sam

 

[SammyT]

Thanks guys, I will be ordering one shortly, that site has all that is needed, pheonix, ce2 and eGo adapter . save me some shipping costs.
I must agree cry, the eGo cone is a bit too large. When you use the pheonix you get the advantage of having a top feeder as well.


-Sam

 

[MickeyRat]

Mickey, look at his first post's. He used O-Rings to make the seal. One on the pos and one on the net side.

This is going to be fun.

Okay, so the o-ring acts as both the seal and to hold it in the threads, right? Sorry, I'm still missing something...I think,

 

[MXBNW]

That is what it looks like. But again I could be wrong.

I am going to mill out the center pin like he did and solder it in so it can not leak.

Okay, so the o-ring acts as both the seal and to hold it in the threads, right? Sorry, I'm still missing something...I think,

 

[SammyT]

I think it is a interference/pressure fit with the tube in the center post. I will not be using any solder on this if I can help it. I think if you ream out the post the tube should fit in there with no solder, and if need be I will use some silicone to seal it. Every time I use solder on an atty it tastes terrible. I think it may be the rat shack lead free solder I have, IDK.

 

[MXBNW]

I may try to press fit it first. I only use high end silver solder on my mods have never had any issues. But its a good heads up. If I can press fit it I will go that way first.

I will get Monday and Tuesday to work in the shop I am hoping my Ego adapters get here early in the week..

I think it is a interference/pressure fit with the tube in the center post. I will not be using any solder on this if I can help it. I think if you ream out the post the tube should fit in there with no solder, and if need be I will use some silicone to seal it. Every time I use solder on an atty it tastes terrible. I think it may be the rat shack lead free solder I have, IDK.

 

[par292]

this looks very easy, and i may have all the parts, now to go look in my junk box.. if anyone finds the ego adaptors with the holes please post where to get them. also what size o ring would be helpful, i just tried the top half of the phoenix on a ego adaptor and first perfectly...subscribed...

 

[TennDave]

The Phoenix is cheap enough from that site at 20% off- there is also another rebuildable they sell- The Rainbow...would that be better?

Also, I'm reading that what is needed is the Ce2 w/ a hole for bottom feeding.
Has anyone found this? How about the wick and wire from this site? Is this what we need to buy?
Will it work for the ERA as well??

 

[MXBNW]

I picked mine up at MV 510 Battery to eGo Atomizer Adapter - Adapters - PV Parts

this looks very easy, and i may have all the parts, now to go look in my junk box.. if anyone finds the ego adaptors with the holes please post where to get them. also what size o ring would be helpful, i just tried the top half of the phoenix on a ego adaptor and first perfectly...subscribed...

 

[TennDave]

Wayne,
Those look great but doesn't look like they come with the center pressure fit tip...am I right or will these work without modifying them? I guess the other thing is the Ce2 w/ a hole, correct??

 

[MXBNW]

Yep need a CE2 with the SS tube, I hop[e the adapters work. I can let you know when they get here.

How you been Dave

Wayne,
Those look great but doesn't look like they come with the center pressure fit tip...am I right or will these work without modifying them? I guess the other thing is the Ce2 w/ a hole, correct??

 

[TennDave]

Yep need a CE2 with the SS tube, I hop[e the adapters work. I can let you know when they get here.

How you been Dave

Hey Wayne- been good...about to leave and go out the the boat for the day!

 

[MXBNW]

Have fun

Hey Wayne- been good...about to leave and go out the the boat for the day!

 

[urquidezj]

I just want to throw out there that the chinese are making Attys out of chrome plated copper. Make sure that the Phoenix you are drilling for this isn't made out of copper. Extremely dangerous if that's the case

 

[TennDave]

So, the ERA doesn't fit down in the mini juice well...does the one talked about here do that, or is there another option?
I am ready to at least buy 510 to 510 connectors for this purpose.

 

[TennDave]

Have fun

Thanks- that was yesterday (back at work now...ughhhh)... But it was fun!!

 

[SammyT]

Good question dave, it's an ego adapter so it should fit I think.


-Sam

 

[MXBNW]

Cry: where did you get those Ego Adapters. the ones I got from MV do not have a two section pos post

 

[par292]

so im guessing we need a special ego to 510 adaptor.. grrrrr or is there another one we can try since mxbnw's one isnt the same