Hussar RTA single coil deck (attack of the clones)

[JustWondering1]

I just re-filled and am on my 4th tank and did a check and can report back that this Coppervape Hussar is dry as a bone, except for the inside of the tank where the juice is supposed to be. This thing is a really great RTA (I'm using the 2mm air pin in mine). I am really impressed though, and glad that @JustWondering1 turned me on to this fine atomizer (I had never even heard of it till she told me about it), it's great for the tight MTL crowd (and I don't even have the 1.3mm air pin setup yet).

I'm so happy to hear you are still liking it so much! I should have my micro tank, new top cap and new pin in probably next week. I still won't be able to use mine, however, until the new base from FT comes in a week or so later. It's going to drive me crazy to have those accessories and have to wait for another China package comes in to use the Hussar again!

 

[TommyNoviomagum]

What spare part you need? Pls more spesific (o ring, airflow pin, torpedo cap or else?)

It is a set
So rings , screws and A key ...


Verzonden vanaf mijn iPhone met Tapatalk

 

[TommyNoviomagum]

Are ya looking for any of this stuff ?? FastTech - Gadgets and Electronics

Yes , but I prefer a original set ( to change the rings on my Coppervape btw )


Verzonden vanaf mijn iPhone met Tapatalk

 

[Steamer861]

My Spare full size Plastic tanks came today from Gear Best
Anyone who wasn't lucky enough to get a spare Plastic full sized tank & would like one.
There available at GB for about 1.60$

 

[benley73]

Yes i have ordered a spare pc tank , then I ordered a second hussar rta from them was only 9£
using some points up before TDP why not I can actually use this second one for juices.
Since my first one now resides as a stealthy vape 420 [emoji12] using the SS tank with the MTL pin installed works well ,
So wanted another for actual vaping

 

[52anddone]

After using those shortie drip tips that Steamer posted about for a couple of tank fulls, I wound up half taking the drip tip out of my Hussar while taking it out of my mouth just a while ago. I looked at the o-rings and saw that the o-rings that came with it were just barely contacting the inside of the Hussar (loose fitting when juiced up a little), so I will have to re-ring those drip tips with better fitting o-rings, before I use them again. In the meantime though, I'm using the drip tip that came with my Siren, the short black one, works great and looks good as well.

 

[benley73]

Stab wood tip from , wolfpaw rda ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[52anddone]

Nice benley.

 

[JustWondering1]

After using those shortie drip tips that Steamer posted about for a couple of tank fulls, I wound up half taking the drip tip out of my Hussar while taking it out of my mouth just a while ago. I looked at the o-rings and saw that the o-rings that came with it were just barely contacting the inside of the Hussar (loose fitting when juiced up a little), so I will have to re-ring those drip tips with better fitting o-rings, before I use them again. In the meantime though, I'm using the drip tip that came with my Siren, the short black one, works great and looks good as well.

I love the Siren drip tips!

 

[52anddone]

I love the Siren drip tips!

Yeah, I like them also, better than most of the others that I have. I like that the Siren drip tips have a small hole instead of a cavernous one that you can put your finger in and wiggle around.

 

[ccwaters]

In case anyone missed it and is still looking for any of the Hussar pieces 3Fvape has them listed now as well.

 

[benley73]

In case anyone missed it and is still looking for any of the Hussar pieces 3Fvape has them listed now as well.

Gearbest has then at 13£ at moment Cop vape Single coil deck version

Sent from my ONEPLUS A3003 using Tapatalk

 

[52anddone]

Gotta a link @benley73 ??

 

[benley73]

Here ,. found a very interesting good in Gearbest：Coppervape Hs RTA Coppervape Hs 5.7ml RTA-21.27 Online Shopping| GearBest.com

Sent from my ONEPLUS A3003 using Tapatalk

 

[52anddone]

Thank You very much for that.

 

[ian91]

Received mine from FT today. Excellent RBA. Perfect for me right out of the box. Already plan to order another this weekend during their mother day's sale. Still waiting on the replacement top cap to get here. Will like it even better once I can use my own drip tips.

 

[JustWondering1]

Received mine from FT today. Excellent RBA. Perfect for me right out of the box. Already plan to order another this weekend during their mother day's sale. Still waiting on the replacement top cap to get here. Will like it even better once I can use my own drip tips.

Glad to know you like your Hussar too! I did the same thing as you. I ordered a second Hussar right away! While waiting for the new top cap to arrive, you can stick a 510 drip tip inside the top cap you are using now. It makes for a taller drip tip height than I generally like, but it's much better than that wide bore tip that comes with the Hussar.

Did you order the reduced airflow pin and the Micro tank too?

 

[ian91]

Glad to know you like your Hussar too! I did the same thing as you. I ordered a second Hussar right away! While waiting for the new top cap to arrive, you can stick a 510 drip tip inside the top cap you are using now. It makes for a taller drip tip height than I generally like, but it's much better than that wide bore tip that comes with the Hussar.

Did you order the reduced airflow pin and the Micro tank too?

I do have a small drip tip on it now but the whole thing is just too tall.

I didn't order either of them. The 2.5mm air hole is perfect for me and I don't like any tank less than 4ml. I chain vape and the small tanks go empty way too fast.

 

[JustWondering1]

I do have a small drip tip on it now but the whole thing is just too tall.

I didn't order either of them. The 2.5mm air hole is perfect for me and I don't like any tank less than 4ml. I chain vape and the small tanks go empty way too fast.

I was vaping it with the 2.5 air hole and it was good. I think I'll like it even better with the 1.3 pin, however. I'm interested to see how the flavor is effected by the smaller tank and 1.3 pin. I feel like I've been waiting forever for these things to get here!!

 

[ian91]

I was vaping it with the 2.5 air hole and it was good. I think I'll like it even better with the 1.3 pin, however. I'm interested to see how the flavor is effected by the smaller tank and 1.3 pin. I feel like I've been waiting forever for these things to get here!!

Did you try out the 2mm pin that is included with the rba? You should try that as well to see which one suits you the best. There is a big difference between a 2.5 and 1.3 air hole.