Igo-f??

[unloaded]

http://www...........co.uk/IGOF_Dripping_Atomizer/p705283_9673102.aspx

Anybody know anything about these? They seem to have a tank under the atty, maybe you run the wick through the hole into it. The center pin is sealed on the bottom but there appears to be a threaded hole on the bottom!?! Here's another site with a pretty vague description:

IGO-F RBA - Kidney Puncher

 

[ClippinWings]

too bad it's tiny... like the IGO-S

 

[NatureBoy]

That's awesome! I agree it's a shame it isn't 22mm diameter, so it matches more 18350 mods, but if I can find a mod with the same diameter as this, I'm definitely getting one. Been wanting this exact thing for a while now!

 

[unloaded]

Hmmm, first link got broke, just google IGO-F Atomizer for more pics.

 

[Fury83]

I pre-ordered one, I am not sure exactly what it is at this point but 14.5mm should look fine on my 14500 mods

 

[Fury83]

Why is that site banned here?

 

[Jerms]

Hmmm I'm intrigued. Love my IGO-S and like my IGO-L. Will wait to see how these work. Looks pretty nice.

Sent from my LGL55C using Tapatalk 2

 

[tekk]

I pre-ordered one, I am not sure exactly what it is at this point but 14.5mm should look fine on my 14500 mods

it's very similar to the Fatty Res atomizer. it's a drip atomizer with 2 post, and a hole that goes into a 1mil tank. this way, it gives you a very slight genny atty feel, but with the vape quality of a drip.

here are the pictures to compare below.

igo-f


fatty res by chris creations

 

[NatureBoy]

I'll wait for other stores to get it. Kidney Puncher is always more expensive.

 

[daventura]

There's a co-op for these.

You're welcome.

 

[Plumes.91]

looks like a great RBA or starter RBA for someone with eGo bats. Looks cool.

 

[michaelvapors]

Just set the iGO-F up. Seems to work pretty well. COV has them in stock atm. The bottom tank has an allen set screw so you can fill it from the bottom post side, I just filled it up before screwing the top/deck on. I am tipping the atty to keep the wet wick or you can just drip too. Mouthpiece is held in place with two o-rings, has a 1mm hole. Plated and a bit heavy for its size. Not bad for $25. Also comes with an eGO thread cover and spare parts kit with 2 o-rings, isolator, allen key, wick and wire and spare tank bottom screw. I used some cotton/hemp wick, doubled and trimmed at the coil. No post holes, just wrap the coil ends around the top phillips screws. Easy to set up!

Observation 1 : Dont put too much liquid in the tank and dont make the wicks so long that they interfere with the connection between the tank and the top deck. When you go to refill, make sure the wick is not covering the inside connection and you will be ok. Don't forget to re align the air hole to the coil.

 

[nevrdowhatheydo]

Mouthpiece is held in place with two o-rings, has a 1mm hole.

View attachment 214851View attachment 214852View attachment 214853

Will it take 510 drip tips? If so this might be exactly what I've been looking for to complete my epipe setups.

Sent from my Nexus 4 using Tapatalk 2

 

[Oktyabr]

That's what I want to know too. Will it accept any 510 drip tip? Can you disassemble the tank section for cleaning?

Love my Mini DIDs and wonder if these are on par.

 

[Leal]

Drip tip is part of the top cap.

UD IGO F from celticvapes co uk - YouTube

The way he sets it up it looks like a great bottom dripper? I gotta try one of these. Co-op here I come.

 

[graffinfected]

Just set the iGO-F up. Seems to work pretty well. COV has them in stock atm. The bottom tank has an allen set screw so you can fill it from the bottom post side, I just filled it up before screwing the top/deck on. I am tipping the atty to keep the wet wick or you can just drip too. Mouthpiece is held in place with two o-rings, has a 1mm hole. Plated and a bit heavy for its size. Not bad for $25. Also comes with an eGO thread cover and spare parts kit with 2 o-rings, isolator, allen key, wick and wire and spare tank bottom screw. I used some cotton/hemp wick, doubled and trimmed at the coil. No post holes, just wrap the coil ends around the top phillips screws. Easy to set up!

Observation 1 : Dont put too much liquid in the tank and dont make the wicks so long that they interfere with the connection between the tank and the top deck. When you go to refill, make sure the wick is not covering the inside connection and you will be ok. Don't forget to re align the air hole to the coil.

View attachment 214851View attachment 214852View attachment 214853

how in the world did you get the wicks in the holes?...

 

[donnah]

Here is a way to use the IGO-F without having to stuff the wicks down through those tiny holes. I tried this same thing with my drunker tank and it works much better! It seems to feed the juice just as good if not better and the air flow is better. Maybe it's my imagination but the flavor seems better too.

 

[graffinfected]

Here is a way to use the IGO-F without having to stuff the wicks down through those tiny holes. I tried this same thing with my drunker tank and it works much better! It seems to feed the juice just as good if not better and the air flow is better. Maybe it's my imagination but the flavor seems better too.

i saw this video before i posted in this thread.. and i tried it...

it works great but i still want to try it out with the wicks going down to the bottom tank. i have a feeling im going to have to get a small wick to get em in there but i only have 2.5mm silica wick.

 

[Fury83]

how in the world did you get the wicks in the holes?...

Cooked it dinner...put on some marvin gaye

 

[graffinfected]

Cooked it dinner...put on some marvin gaye

HA! Brilliant

i do wish someone would answer though.. i cant stand the drip tip on this thing .. and its too small..