Introducing the Precise Strata RDA

[Danielsuzuki]

Hello all. I got a package today from Minnesota...



I have provari(s), a smoktech natural and RSST, several Evods, some 510s, and a whole lot more the I don't own anymore. This is, hands down, the most gorgeous piece of equipment I own. Even the dang delrin drip tips are finely machined! There's a job, then there's pride in your work. I have obviously waited for a device made by folks that are proud of what leaves the shop. I'm truly floored.

The same coil from my second build hits quite a bit harder from the Simplicity than from my trusty pocket knife, time for a rebuild.

I'd also like to take the time to thank you guys for all your information and witty banter. To those who haven't yet received their devices: the wait is absolutely worth it!

 

[snork]

I still think it's so cool we got our start on V2 together and here we are. I'm sure it's not all that uncommon but you are the only identifiable one who landed here at Super-T.

 

[High Voltage]

First build and it's working fine....

 

[Danielsuzuki]

I still think it's so cool we got our start on V2 together and here we are. I'm sure it's not all that uncommon but you are the only identifiable one who landed here at Super-T.

Thats a fact!

 

[Boiler]

I haven't seen (m)any comments on the Helix effect.

What differences are there between using the Helix tip and a normal one?

 

[Drozd]

The longer screw in switch post included will take up to 7 washers on it. To adjust the battery rattle though, you'll need to add an oring or two to the bottom of the battery chamber , the screw in post won't adjust the rattle only the button throw length. Included in your parts kit are also some washers and two thick and two thin orings. First set up the orings. The orings come in two thicknesses, .100 thick and .070 thick. I'd start with 3 thick (.300) and see if the rattle is there or if its too tight. Adjust accordingly. If too tight, go with two thick and one thin (.270) or is its too loose, go with two thick two thin (.340). Then adjust the center post up to the throw you'd like by adding washers.

On the tip, yep, we can get you out a longer one, if you haven't already, shoot us and email to supertmanufacturing@yahoo.com with your real name and address and we'll get it out to you!

Thanks Vcoupe, if you have any questions, feel free to ask!

Well crap...the mail I sent had my name and just gave my original p+ strata order # figuring you'd pull the name and address. ?.guess I need to send another e-mail...

 

[COM76]

What is the go with having to add washes and orings to stop the battery rattle? The positive pin is not adjustable? Why not? Also will this be the same on the ELA strata? I have AW batteries and Effest batteries, will there be dramas here? Thanks for any help.

 

[High Voltage]

Second successful build...this one is a keeper....quad micro-coil, great performance.

 

[Danielsuzuki]

I haven't seen (m)any comments on the Helix effect.

What differences are there between using the Helix tip and a normal one?

I haven't noticed any difference, however, I'm being very much overloaded by nic and flavor at the moment. Just really digging this atomizer!

 

[forcedfuel50]

Well crap...the mail I sent had my name and just gave my original p+ strata order # figuring you'd pull the name and address. ?.guess I need to send another e-mail...

No worries Drozd, we just look the address up from your orders if it wasn't on the email

 

[forcedfuel50]

What is the go with having to add washes and orings to stop the battery rattle? The positive pin is not adjustable? Why not? Also will this be the same on the ELA strata? I have AW batteries and Effest batteries, will there be dramas here? Thanks for any help.

That's only on the old Precise/PrecisePlus 18500 and 18650 that you need to do any real adjustment, they had a different cap deck height on them. The Simplicity and ELA Stratas, most will run with your current oring/washer combo with no adjustments really necessary.

 

[forcedfuel50]

I haven't seen (m)any comments on the Helix effect.

What differences are there between using the Helix tip and a normal one?

For me, I'm not seeing a big difference. I'm thinking the extra stirring effect of the Helix post may be a bit overkill as it is atomizing really efficiently if you get the coils set right in the airflow, but shrug, who knows...maybe it's why my weak ... goes into full nic overload when I'm testing this....

 

[Symbolik]

What is the go with having to add washes and orings to stop the battery rattle? The positive pin is not adjustable? Why not? Also will this be the same on the ELA strata? I have AW batteries and Effest batteries, will there be dramas here? Thanks for any help.

The ela telescopes... I don't know how you can ever get rattle with jt

Sent from my HTC6500LVW using Tapatalk

 

[COM76]

The ela telescopes... I don't know how you can ever get rattle with jt

Sent from my HTC6500LVW using Tapatalk

18350 mode does not use telescope and of with an 18500 ss ring on it there could have been dramas.

 

[Draconian]

Understood the frustration, and I can't speak from personal experience as my strata isn't here yet. However - from what I have observed - a couple things to keep in mind.
This is not a "typical" RDA - it's more advanced - now, whether that's good or bad will be told in time - for now - yes - for some, it's been a pain in the ..... The design is different - might not be a bad idea to forget what you know from typical RDA and think outside the box. Air flow NEVER goes straight from the air hole - NEVER - it goes to the drip tip - there is NO straight. Think of the perfect fluid - and how it would flow under suction from the hole to the tip - and go from there. Of course - I don't have mine yet - sooo...I am talking out of my..... and, when I get mine, I may be frustrated as welll.......
There are some folks blowing clouds without too much hassle - so it has to be doable. Hell....anyone can build an IGO-L....

 

[JollyRogers]

Bigern, the vape on my current build is pretty good. I built simple dual coil mini/micro @1Ω total resistance using silica. The micros are close to the inner edge of the atty, and right on the deck. Fully filled the tank, and can vape it almost dry. I cannot vape it dry, otherwise I get a real terrible taste. Dialing the air down (tighter draw) made it better also.

I have also experienced leaking out the air holes from laying it on its side. So though it doesn't tend to leak, it is not leak proof. So I have to lock my Simplicity switch and stand it up.

I actually vaped it exclusively yesterday. When I got home was going to try another build, but decided against it and drank beer instead.

 

[forcedfuel50]

Good morning Folks. Just a little heads up that over the past few days we've now positively identified 3 people who are posting fake reviews/results often when they dont even own one. We've had the moderators involved and two so far have had to be banned. I caution you to keep a very open mind when seeing these "reviews". Are all negative comments fake? Heck no, but the fake ones we've usually been able to track by their real name, IP and shipping information(or lake there of), so we'll remain vigilant to keep this thread on track.

 

[forcedfuel50]

BigErn, i sent you a PM.

 

[forcedfuel50]

another quick comparison video:

 

[eternalsurf]

Any build videos yet?