Heres a user vid of the silver color: https://www.youtube.com/watch?v=NCTYFDHvGrI&feature=youtu.be
IPV 35w and 50w box mods
- Thread starter ainako
- Start date
- th_trl_thread_readers 0
- Status
1. Most USB charge at .5a, so you're looking at 5-6hours for a VTC5
2. Yes
3. I've heard that just the first time is hard to untighten. Just screw and unscrew a little bit to work the threads and get any glue out if any.
4. It's recommended that you don't charge and vape simultaneously, I'm gonna stick with what's been suggested for now. Probably gonna attempt to replace the screws with magnets to make for ease of battery swap.
I want someone out there to figure out how to make a magnetic closure for the back of this mod so you can pop on and off with no trouble.
Greenleaf is adjusting the IPV2 to have FOUR screws on next model. Ugh. If they are that small it will be a pain in the ....
ALSO... FYI.... Jwraps and Vaporskins are both about to release a wrap for this new mod. It will keep it looking pretty but you would give up the ability open and change battery (unless they make it like the variant by vicious ant.)
Greenleaf is adjusting the IPV2 to have FOUR screws on next model. Ugh. If they are that small it will be a pain in the ....
ALSO... FYI.... Jwraps and Vaporskins are both about to release a wrap for this new mod. It will keep it looking pretty but you would give up the ability open and change battery (unless they make it like the variant by vicious ant.)
I'm going to try. The video posted above of the Silver IPV at 5:31 shows that both the outer plate and the inner threaded area have a cut out, the outer to fit the screw head, and I have no idea why on the inner... but this should make for a much easier magnet conversion. I want to get some powerful neodymium's that fit perfectly in those little divots and just give them a dab of hot glue, hopefully not even having to drill out anything and void warranty. I'm thinking 3x1.5mm or 4x1.5mm should do the trick but I don't have the mod in hand so I don't have any measurements on that.
Anybody out there that can give measurements on the diameter of the cutout for the screw on the backplate?
shouldn't be that difficult use some small disc magnets, if the box layout permits you could find some that fit or just drill the screw holes out just enough for a fit on the box & the cover and superglue in some disc magnets, just an idea.
Super Magnet Man Super Disc Magnet
edit: the first link was just an example
here is a whole page to choose from
http://www.supermagnetman.net/index.php?cPath=31
Last edited:
Probably. I'm working out the numbers now and if it were done with 3x1mm magnets it would be about a 64 gram pull resistance. It would likely work, but probably be annoying. Maybe 3x1mm magnets on the outer plate and drilling out threads internally for a longer magnet would be sufficient.
I guess is it possible they didn't have the shunt, or whatever simple switch, that stops charging battery when you operate the fire buttons?
That's the only logical reason I could see for this being the case.. but I don't know what I'm talking about. I'm on "the other side" of the electrical field.
I hope that can be sorted out, or is false. I got this mainly for when I'm sitting around, by a power source.
That's the only logical reason I could see for this being the case.. but I don't know what I'm talking about. I'm on "the other side" of the electrical field.
I hope that can be sorted out, or is false. I got this mainly for when I'm sitting around, by a power source.
I have had mine on hand for about 20 minutes. The screws weren't over tightened, they came out fine. The touch fire button at the top can be disabled. I have put a couple tanks and a dripper on it, various wattages, no problems.
This is from elev8.@jluc
From where?
My tracking still says "electronic shipping info received". Since Wednesday.. anyone else from elev8vape's preorder have this? I'm all antsy...
@jluc
From where?
My tracking still says "electronic shipping info received". Since Wednesday.. anyone else from elev8vape's preorder have this? I'm all antsy...
Elev8 has a history of doing this. Nothing to panic about though. They just haven't gotten through processing at the local post office. It's actually a good sign. I think they package them up in many quantities. Then send them to the post office. IMO
Same here suspectK order#6190 Black from elev8 Pre shipment for 2 days now
@jluc
From where?
My tracking still says "electronic shipping info received". Since Wednesday.. anyone else from elev8vape's preorder have this? I'm all antsy...
Jeez... they must be doing well..
I'm order 5796..I wouldn't think they'd have many orders since the IPV2 that didn't include an ipv2 in the order..maybe they do. Not much of a selection though..popped different tobh colors before they got them in.. and must have gotten the magma around the same time..but not a very wide selection.
I'm order 5796..I wouldn't think they'd have many orders since the IPV2 that didn't include an ipv2 in the order..maybe they do. Not much of a selection though..popped different tobh colors before they got them in.. and must have gotten the magma around the same time..but not a very wide selection.
Same here suspectK order#6190 Black from elev8 Pre shipment for 2 days now
At least yours is out, I'm roughly 70 #'s from yours and mine probably wont even get to elev8 until next week.
Agreed I am Thankful that I'm in the first round of shipments didn't think I would be
- Status
Similar threads
- Locked
