Wolands honey, dats not rights, use dis one...
please
And if I ain't round and sumptin sucks use dis one...
- Status
Yiddles I think Wolands needs a couple more pointers, don't worries, not yetsButts...............ya can't retires mama !!!!!!!!!
Sorry - I misread somewhere where it said that it was polycarbonate...
The best clue as to what the plastics are is to look for a cloudy color. The perfectly clear see right through plastics are 'USUALLY' pc (not always but usually) ..........and the ones that are not really clear or a cloudy color to them are usually pp.Sorry - I misread somewhere where it said that it was polycarbonate...
That's most of the time how you can tell if there's no description with a tank and no need to say you're sorry honey
Yiddles I think Wolands needs a couple more pointers, don't worries, not yets
Couple? I think a lot more! Don't retire for a long, long time, because if you retire soon, we'll all be sad here
.
Thank you - I never thought of that oneThe best clue as to what the plastics are is to look for a cloudy color. The perfectly clear see right through plastics are 'USUALLY' pc (not always but usually) ..........and the ones that are not really clear or a cloudy color to them are usually pp.
and no need to say you're sorry honey
I appreciate the help! It's one of the reasons I love ECF!you're quite welcomeThank you - I never thought of that one
there's tons of helpful peoples on this GotVapes sub forum alone. Ask away, some one will always help you.
Yes, I always lay my tanks on their side at night and in my handbag. Never had a leak
Yes, I always lay my tanks on their side at night and in my handbag. Never had a leak
Same here with my tanks, I heard it was problematic for RBA's, excluding the Kayfun.
I've seen some amazingly beautiful PV stands and tank holders around the forum, but I don't have anything like that
so everything gets layed down on it's side never had trouble with the SRT though, I can say that
Introducing the NEW SMOKtech GotVapes Hyper SRT II Rebuildable Clear Tank 4.0ml
$21.95
COMPLETELY NEW DESIGN! First at GotVapes, the NEW Hyper SRT II RBA!
- Stylish chrome finish top accepts most 510 drip tips, comes with a clear drip tip.
- NEW easy to change out coil/wick employing brass springs:
- Pre hook the end of your coil.
- Press down on the spring plate at the top, you don't need to press down too far at all. Use your fingernail or whatever is convenient for you.
- Hook your coil in and then release the spring plate.
- That easy!
- Clear poly propylene 4ml bottom tank
- Your Hyper SRT package comes with one 2.5ohm precoiled wick and three additional coil/wick combos at low (2.0ohm), regular (2.5) and high (3.0ohm) - all +/- .2ohms
--------------------------------------------------------------------------------
Here is the product description from the original Hyper SRT (much of the same applies)
Introducing the GotVapes Hyper SRT II - Self Rebuildable Tank, manufactured by SMOKtech (aka/marketed by SMOKtech as the VIVI Tank).
This is a Genesis style tank atomizer setup that allows you to change wick and coil to your own preference in both material used and coil resistance. The clear PC tube comes off easily (it is best to attach to a battery first and then remove mouthpiece and wiggle tube off) yet provides a good seal with snug gasketing. Once removed you have access to the top portion of the tank (which is separated from the lower juice reservoir by a gasketed metal plate)). Installign coil/wick replacements is made easy with a new spring-loaded system!
The Hyper SRT II comes precoiled and wicked from the factory floor as a courtesy to the builder but the coil is not WARRANTIED in any way as this unit is for the advanced user that should have a good knowledge of building their own coils. Most Tanks of this kind do not include coil or wick, the user is generally required to provide their own. The included coil may not be attached or may be broken, if the user decides to use it they may need to adjust for best performance. Most often that might entail tightening the coil around the wick so that it is making proper contact with the wicking and can then vaporize your juice. The resistance wire that it is installed with is 2.5ohms. You are also provided 3 more coil/wick combos at various resistances.
You can fill through the plate holes where the wickign goes into the juice reservoir or you can turn Your PV upside down and wiggle the tubing down enough to where you can fill with your juice bottle directly (Chris shows this method, which is the easiest and quickest, in the video below - please remember this video centers around the older Hyper SRT, we will have an updated video soon)
bumpity bump
oh wow, those look great. with the nice metallic caps and the clouded plastic tanks it looks as good as a true rebuildable. Does anybody know if you get a 2nd plug for 1 of the wick holes for if you plan to use a vertical steel wick? Or would you need the 2nd wick hole for airflow anyway? I'll order one of these and find out for myself if no one has the answers These look fantastic GV, another neat-o accessory.
why is there a carto on my mod right now???
These look fantastic GV, another neat-o accessory. why is there a carto on my mod right now???
I've seen some amazingly beautiful PV stands and tank holders around the forum, but I don't have anything like that
You had to say that, didn't you?
Other than cost the only reason I wasn't getting an RBA was because of the lay down issue.
I need to exert some self control
.
Okays, One HAPPY MONKEYS HERE !!!!
Got mine today, checked 'er out n filled 'er up ! SWEET !!
Wally, no there is no hole in the top cap. The drip tip that came with it was not one of my favorite kinds
so I took it off an any of my regular 510's fit right in nicely This thing vapes BEAUTIFULLY ! Very nice smooth draw, loads of vapor, great tastes of my juices. The tank itself is very light in weight which for 'me' is a BIG PLUS !!! Comes apart much easier then the first SRT model and goes back together real nice as well. The pre-installed wick that came on it was posta be a 2.5ohm ? Well, it came in at 2.1ohm on my provari. I've been vaping this for awhile now and so far no dry hits, no burnt tastes, and laying it down have no leaking what so ever 
Received mine in the mail today and loving it! I've been rebuilding Vivi Nova heads for a while now and enjoying that but now I'll be using the SRT II. I think it outperforms my Vivi. Loving the perfect draw!
I'm with you on loving it's draw and taste
I've been vaping this all day since about noon and it hasn't changed one bit, still vaping beautifully. Still no dry hits, still no leaks any wheres, easy to fill. Just plain ole Lovin it ! - Status
Similar threads
- Locked
- Locked
- Locked
- Locked
