Great, try it. You won't need much adjustable airflow because with a 1.2 mm air hole you already a medium to tight draw.
- Status
Great, try it. You won't need much adjustable airflow because with a 1.2 mm air hole you already a medium to tight draw.
Haha your reading my lazy mind....That is what the stock Taifun is, and I quite like it for "normal" coils. But not so much for Mundy Magic or low ohm coils.
Probably worth noting here since several are getting the TGT clone from FT....a 14g needle fits the original TGT and increases the air hole to 1.6mm, its a tight fit but does slide in.
Ok BJ I designed this for you....what do you think?
The intent is for an easy vert coil build, adjustable air and liquid control, easy top fill. The center tube with slots will screw into the atty deck once the coil has been attached, then you can pack with hemp. The chimney will go over the top and will be adjustable up and down for liquid control, which can be closed completely to fill from the top. The adjustment parts aren't show because they are still in prototype fabrication and testing on a different atty design.
Is this the right place to sign up for one of these? or five or six?
And if the cone coil, small end up turns out to be more efficient that bottom hole could be even larger..
Sure, sign up but I have feeling you are going to be waiting awhile
Yep, it has to go thru tropical testing before it gets approved for production....
Yep, it has to go thru tropical testing before it gets approved for production....
Yep....anytime as long as your springing for the airfare for me and the misses
careful, bap - there have been some mighty attractive air fares
it might be cheaper for bj to import you and the misses than to pay all those forwarding charges!
it might be cheaper for bj to import you and the misses than to pay all those forwarding charges!
Sure, sign up but I have feeling you are going to be waiting awhile
Well, It's a good thing that one of the first things I learned was that vape mail anticipation can be survived!
Last edited:
I would love to hook Bap up with somebody at HCIGAR, they cant seem to do anything original but they sure copy well.
careful, bap - there have been some mighty attractive air fares
it might be cheaper for bj to import you and the misses than to pay all those forwarding charges!
The problem is getting from the airport to my residence...Remember to bring your Vamos....
The U.S. warns its citizens on rising assaults at major Dom Rep airport
DominicanToday.com - The United States warned its citizens traveling to Dominican Republic on increasing robberies of visitors entering the country through Las Americas Airport.
On its Website the State Department says criminals impersonating police arrest travelers along several roads after leaving the airport, where they are assaulted at gunpoint in their vehicles and their valuables stolen. "In some cases, travelers who stay in private homes rather than hotels are followed to where theyll stay and robbed as they enter the premises."
The State Department also notes that "while no U.S. citizens have been killed during these robberies, the U.S. Embassy has received reports of several injuries."
It adds that such incidents have occurred at night, either in private vehicles or taxis. "Its unclear how the victims are spotted within the terminal. U.S. citizens arriving at Las Americas Airport should take the necessary precautions, or consider scheduling arrival times during daylight hours."
Read more here: Dominican Republic
Gangs robbed travelers exiting busy airport nabbed, confirms U.S. warning
The Police arrested at least four gangs of thieves who robbed travelers leaving Las Americas Airport (AILA) in the last five months, including one woman in one of them, based in nearby Andrés and Boca Chica.
The report comes just hours after the U.S. State Department warned American citizens on traveling to the country, noting the high number of highway robberies of travelers after leaving the countrys busiest airport.
El Nacional reports that Police busted the gangs totaling 22 people, with only four still behind bars.
The latest group arrested in May, four men and one woman, assaulted several travelers from the U.S., including the couple Francisco Lantigua and Kenya Suriel, who lost US$10,400, items valued at RD$100,000, among other belongings brought after his return.
The police seized an unspecified amount of cash and items and charged Luis Miguel Sanchez, Jovanny Gala Lizardo, Rafael Recio Arcadio, Manuel Perez and Victoria Silfa. The men are still being held without bail while Silfa posted bond.
It was reported that the four men a court imposed coercive measures three months, while the woman was sentenced to a fine, barred from leaving the country and regular reporting to the judge.
The U.S. Embassy had also issued travel advisories, which prompted top AILA official Carlos Cota Lama to affirm that members of the military and civilians are the gangs accomplices.
I guess it's a good thing it's too hot for me down in the DR anyway....
BJ, do you have any suggestions as to the best way to "fluff" the dried hemp fiber? Mine dried in little clumps, and I'd like to make it more cotton-y if that makes sense. I don't have the dog brushes or carding brushes. I've been pulling it apart with my fingers, but that is pretty tedious so far.
BJ, do you have any suggestions as to the best way to "fluff" the dried hemp fiber? Mine dried in little clumps, and I'd like to make it more cotton-y if that makes sense. I don't have the dog brushes or carding brushes. I've been pulling it apart with my fingers, but that is pretty tedious so far.
1.5ohm 29g coil wrapped on a 16g needle, 14g needle air tube sleeved with a 16g needle that barely sticks out the top. I wrapped the coil like normal and then put on the chimney, then I packed the from the base up to the bottom of the coil super tight, then just loosely filled up to the top of the coil. It's working great, but time will tell.
I also just pull it apart with my fingers. It is such a small amount I use in Rockets and Foggers it is no big deal and since I pack firm, I don't worry much about clumps, they absorb juice as well or better than combed.
LOL Bap, every day we are getting closer to building a great rebuildable carto in a tank...
On my third tank on the inverted cone. It seems to be the same as the other cone, can't really tell any difference. IMO both are still better than the straight vertical. I am thinking on the straight vertical maybe the 1.5mm dia is a little too small and the air is coming thru the coil too fast. Since I now have some more Rockets I am going to do a 1.6mm and a 1.8mm straight vertical at 1.5 ohms and do a side by side with the 1.5mm.
Last edited:
sorry guys but i have not kept up with this atomiser at all…. but it damn sure looks like the design on most of the Art of Exhale
dripper and dripper tanks that i have…
up to now, i've used horizontal micro coils… i'd have feared touching the air hole with coil… why? 'cause i don't know spit about science.
am i good to go? ie. the Gryphon to start….
really got me planning now…
dripper and dripper tanks that i have…
up to now, i've used horizontal micro coils… i'd have feared touching the air hole with coil… why? 'cause i don't know spit about science.
am i good to go? ie. the Gryphon to start….
really got me planning now…
1.5ohm 29g coil wrapped on a 16g needle, 14g needle air tube sleeved with a 16g needle that barely sticks out the top. I wrapped the coil like normal and then put on the chimney, then I packed the from the base up to the bottom of the coil super tight, then just loosely filled up to the top of the coil. It's working great, but time will tell.
Bap - is the top of the coil above, below or even with the highest point of the slots that open to the tank?
- Status
Similar threads
- Locked
