Just hemp

[sahsah]

Vanessa got back to me. 5yd 2mm hemp twine, 1 0z hemp fiber, 6x18in hemp cloth.

I checked out that for you all. It is something i can do. As soon as i can get some fibers and cloth. I will set up a baggie with all three you requested. I will charge $6.95 for the packet. Let everyone know hopefully by february 1st i will have it up. It all depends on if the supplier will have the product available for me by then. Thank you for the request.

Vanessa (lovepedal)

Hey, sorry in advance for the noobish question, but I'm unlearned when it comes to hemp in regard to wick-based applications. So what is the difference between thread vs fiber vs cloth and what would each be suited towards specifically in terms of wicking and rba's in general?

 

[BJ43]

Hey, sorry in advance for the noobish question, but I'm unlearned when it comes to hemp in regard to wick-based applications. So what is the difference between thread vs fiber vs cloth and what would each be suited towards specifically in terms of wicking and rba's in general?

Twine for thru the coil wicks.
Fiber for around the coil wicking, but can also be used thru the coil.
Cloth for rebuilding cartos. Replace the cotton diaper with a hemp diaper. When I get around to it, I will find other uses....

 

[BJ43]

TFGT 28g 1.2ohm vertical coil with hemp fiber at 4.92v on my Raptor Weekender. Ry1 tobacco and heaven..
Clic pic for video

 

[tiburonfirst]

Twine for thru the coil wicks.
Fiber for around the coil wicking, but can also be used thru the coil.
Cloth for rebuilding cartos. Replace the cotton diaper with a hemp diaper. When I get around to it, I will find other uses....

bj, did you ever hear back from vanessa?

 

[BJ43]

bj, did you ever hear back from vanessa?

I will email her....

 

[BJ43]

I will email her....

Got this back from Vanesa.


"We have been totally slow on business lately due to this time of year. As soon as that company gets that product in stock; we will make some packets for you of what you requested. Thanks for being patient with me.

I have officially went back to college. Now there is only my other half fulfilling orders. He isn't the fastest. He gets the job done. Let everyone know sorry if things lag a bit. This summer things will be back to normal. Just know this will be for about a year and half."

With this delay, it may be of interest to some for another hemp fiber co op.

 

[tiburonfirst]

she better hope you don't find something else that's even better while she's on a slow boat!

 

[BJ43]

she better hope you don't find something else that's even better while she's on a slow boat!

Working on it.....

 

[rolf]

TFGT 28g 1.2ohm vertical coil with hemp fiber at 4.92v on my Raptor Weekender. Ry1 tobacco and heaven..
Clic pic for video

hi bj !
just ordered some hemp fiber ... will try it in the taifun ..any link how to build ? how is ry 1 compare to ry 4 ? where do you get it?

 

[BJ43]

hi bj !
just ordered some hemp fiber ... will try it in the taifun ..any link how to build ? how is ry 1 compare to ry 4 ? where do you get it?

Ry1 has very little caramel, I dislike caramel so I do not use any Ry4.
Mix 1 drop per ml.

Ry1 Flavoring by Hangsen - ecigExpress

 

[rolf]

thanks bj !
I have been using vz flavors and other hangsens ..my favored is still my own extraction for flavor the only thing it plugs the attys faster.
used hobby lobby 1 mm hemp in gennisis not to good ..3 strands about 1.8 ohms ...two or three drags that's it it slides out of the coil , into the tank ! next will try a micro coil w hemp fiber in gennisis . still thinking of drilling my did clone for air channels from the side and up for air through the coil .
will one kilo hemp fiber build at least 5 attys? lol ..my taifun has stripped threads and waiting for replacement parts.

 

[mikepetro]

will one kilo hemp fiber build at least 5 attys?

No, probably only 4 attys......... each day for the next 3 years!

 

[BJ43]

thanks bj !
I have been using vz flavors and other hangsens ..my favored is still my own extraction for flavor the only thing it plugs the attys faster.
used hobby lobby 1 mm hemp in gennisis not to good ..3 strands about 1.8 ohms ...two or three drags that's it it slides out of the coil , into the tank ! next will try a micro coil w hemp fiber in gennisis . still thinking of drilling my did clone for air channels from the side and up for air through the coil .
will one kilo hemp fiber build at least 5 attys? lol ..my taifun has stripped threads and waiting for replacement parts.

I gave up on gennies, have not used one in many months. IMO They are in the past, so many more efficient RBAs available.

 

[BJ43]

No, probably only 4 attys......... each day for the next 3 years!

More like 6.8 yrs if my .1g per build is average..

 

[rolf]

oh well...why piddle around !

 

[rolf]

bj !
funny ...so far I am allways going back to the gennys...using ss and swipe a little cotton on it ..never had a problem.
kanger pro rebuilds ..oh well .. either very good or not so much .. not given up jet .
have high hopes for the taifun with hemp fiber ..will try vertical first . mike seems to like it.

 

[BJ43]

bj !
funny ...so far I am allways going back to the gennys...using ss and swipe a little cotton on it ..never had a problem.
kanger pro rebuilds ..oh well .. either very good or not so much .. not given up jet .
have high hopes for the taifun with hemp fiber ..will try vertical first . mike seems to like it.

Taifun with a vertical 28g 1.3 ohm and hemp fiber is my goto. I have 3 more coming. Could never go back to the metal flavor of SS mesh or the cotton for that matter. It is hemp for me until I find something better, which I am always looking for.

 

[arh32]

Just wanted to stop by and give a big Thank You to all of you on here who helped me get set up with hemp fiber. I am using russian 91 vert coil with hemp fiber for months now. I am getting 1 week before i need to change!!!!!! I would get one tank with cotton. This is what i have been looking for hassle free vaping. Thank You All!!!!!!!!!!!!!!

 

[bapgood]

I have had a few inquire about my hemp TGT build. So I finally remembered to take pictures this morning when I rewicked. I vary the number of stands depending on the air tube I'm using and my mood, but its usually 8-10 thru the coil and 18-20 total.

This build was on my authentic TGT with 1.2mm air tube.
29g Kanthal, 9 wraps around a 16g hypo needle (~1.6mm) for ~1.5ohms, 9 stands (3 of the 12 removed) thru the coil, 9 strands on top of each side of the coil
Good to go for several days of heavy use and takes very little time to setup

 

[dice57]

Yeah running hemp in all my builds now. Usually get up to 3 weeks before needing changing but then am running 6 rba's currently.