Status
Not open for further replies.

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
I just got this email from lovepedal...

Hello, I just got home from work. Sorry about lack of response. Yes we do have 12 strand. I need to change my listing to say 12 strand. No need to cancel.

- lovepedal

Sweet! I rushed my order last week and I got the 3 strand type. I used it as a heat guard wrap on my bamboo shaft I use to direct steam for my uncle's allergies
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
Post #420 on the Hemp thread! :evil:

Same Hemp Basics product, same vendor, on Amazon, cheaper shipping ($6.00) instead of ($10.00+)

Amazon.com: 12 Strand Natural Hemp Yarn: Arts, Crafts & Sewing

Which is better? Natural or Bleached?

I saw a pic of one of BJ's recent setups on a Vivi Nova, and it looked White. I was surprised by that, but it looks like Bleached might be the thing now. :)

Does the Bleached have less initial bad taste, or Break-In time? However you'd like to word it. Sorry, but I haven't read up in a while. I hope you don't mind me asking.

Since BJ posted this right after yours...

Just a word of advice. On all my tests the twine (twisted) wicked much better than the cord (braided).

...I'm wondering if it's truly the same thing as Lovepedal. The Amazon site says it's Twisted.

I wish I could find a shorter supply, like 1/2 or 1/4 that much, for less than $20 +$6. I could handle $5 or $10 plus S&H, but funds are pretty tight. I'm going to ask the Vendor about this. I'll let y'all know.
 

PinoyBoy

Super Member
ECF Veteran
Verified Member
Feb 4, 2013
303
376
WA State, USA
Can we use hemptique brand? My local craft shop carries a wide variety of their product. It doesn't state on the package if they are waxed, dyed, bleached, treated, whatever. All it says is "Natural Product". Here is the actual product It is only a few dollars, but I want to be sure.

Which is better? Natural or Bleached?
I saw a pic of one of BJ's recent setups on a Vivi Nova, and it looked White. I was surprised by that, but it looks like Bleached might be the thing now. :)
Does the Bleached have less initial bad taste, or Break-In time? However you'd like to word it. Sorry, but I haven't read up in a while. I hope you don't mind me asking.

I've been following the cotton wick thread, and a few users stated that bleached cotton cheese cloths wicks better than non bleached. I don't know if the same applies to hemp. A few pages back, some users tried to bleach/alcohol their hemp wick to get rid of the taste. I don't know the result, haven't bothered to look for them.
 

Stoneface

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
9,022
51,561
New York

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
BJ I have to ask you how much is the ceramic wick? Also is it better then your last setup where you had a 2mm main wick and a 2mm feeder wick? My protanks and vapeonly bubbles like yours when I chain vape. I have been getting ALOT of hemp swelling with my last few heads. It vapes good the first tank but once I leave it overnight it swells up and chokes itself.
 

BJ43

Vaping Master
ECF Veteran
Verified Member
Nov 27, 2008
5,896
7,212
82
BJ I have to ask you how much is the ceramic wick? Also is it better then your last setup where you had a 2mm main wick and a 2mm feeder wick? My protanks and vapeonly bubbles like yours when I chain vape. I have been getting ALOT of hemp swelling with my last few heads. It vapes good the first tank but once I leave it overnight it swells up and chokes itself.

The ceramic BD13 is not on sale yet. What chokes when you leave yours overnight? Does it quit wicking or does it choke the airflow?
 

BJ43

Vaping Master
ECF Veteran
Verified Member
Nov 27, 2008
5,896
7,212
82

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
The ceramic BD13 is not on sale yet. What chokes when you leave yours overnight? Does it quit wicking or does it choke the airflow?

Both my air holes are drilled out on the vapeonly. The draw gets noticeably tight when i take direct lung 10s draws. It seems to get constricted and doesn't wick as well over night. Maybe its because i am loosening the twist when i take some strands out. This is only on some heads so I am still working on something that'll work constantly. So far I like 4x5S but I have to twist the 5S pretty tight to leave extra rooms if it swells. I also like freehand 3x7S. I use a needle about 1mm to wrap the coil with the wicks. Both gives me good flavor. I don't really care about vapor as much anymore. I don't get a lot of swelling with the protanks though.
 

Ken B

Senior Member
ECF Veteran
Feb 15, 2013
75
77
74
Penang
Just trying my first Hemp wick in my Protank and Evods. Washed and boiled hemp as per BJ, and left to dry. It came out nice and soft and enlarged from original size.
Using 32g kanthal 5 wraps giving 2.8 ohms. Have opened up the channels for the wick slightly, to help with choking off the flow of juice. From dropping a little juice onto the hemp before installing the head, it does appear to wick like crazy. Very encouraging.
Still experimenting with different number of threads through the coil. Tried 4 which went through, but was very tight, and choked up straight away. 3 seemed ok, but when juiced, I had to pull some threads out to loosen it in the coil as it was very tight, and I was getting hemp flavour. Now trying 2 threads, which seemed very loose in the coil, but as this hemp seems to expand so much, may be ok after a nights soaking. I think maybe 2.1/2 threads may be the optimum for my setup, but time will tell.

Many thanks to all for the help and advice given in this thread.
 

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
Can we use hemptique brand? My local craft shop carries a wide variety of their product. It doesn't state on the package if they are waxed, dyed, bleached, treated, whatever. All it says is "Natural Product". Here is the actual product It is only a few dollars, but I want to be sure.

Check out the amount of strands thats in there. You want really small fine strands that will break up almost cotton fluffy if you play with between your fingers.
 

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
Just trying my first Hemp wick in my Protank and Evods. Washed and boiled hemp as per BJ, and left to dry. It came out nice and soft and enlarged from original size.
Using 32g kanthal 5 wraps giving 2.8 ohms. Have opened up the channels for the wick slightly, to help with choking off the flow of juice. From dropping a little juice onto the hemp before installing the head, it does appear to wick like crazy. Very encouraging.
Still experimenting with different number of threads through the coil. Tried 4 which went through, but was very tight, and choked up straight away. 3 seemed ok, but when juiced, I had to pull some threads out to loosen it in the coil as it was very tight, and I was getting hemp flavour. Now trying 2 threads, which seemed very loose in the coil, but as this hemp seems to expand so much, may be ok after a nights soaking. I think maybe 2.1/2 threads may be the optimum for my setup, but time will tell.

Many thanks to all for the help and advice given in this thread.

I get a lot of swelling after I got through 1 tank. The heads that taste really good right off the bat gets choked up overnight. What device are you using the hemp on?
 
Last edited:

Ken B

Senior Member
ECF Veteran
Feb 15, 2013
75
77
74
Penang
I get a lot of swelling after I got through 1 tank. The heads that taste really good right off the bat gets choked up overnight. What device are you using the hemp on?

Thanks for the reply. I am using a mixture of Vamo and Egos with the Protanks and Evods. The swelling of the hemp appears to have stopped now, but the taste has become less, and the TH harsh. On inspection, the wick appears very wet so no sign of choking since I have pulled the threads, so no idea why I have lost the flavour. I did try just 2 threads of the 1mm hemp but it wasn't enough at all as it didnt swell up enough to fill the coil. Will keep trying as I believe the hemp could be good for me.
 

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
thats weird. Almost every build I do with the protanks i get a consistent vape. Its the vapeonly BCC that I have trouble getting good right now. If its the 1mm hemp I have to use at least 3 for the protank. If I don't break up the strands in the hemp I use an oval coil. If i use a tradition coil I break up the strands down to 4-5S and use for wicks like that with 1 7S feeder wick over the coil.
 
Last edited:

Kent Brooks

Resting In Peace
ECF Veteran
Apr 24, 2013
17,678
91,969
48
Omaha, Nebraska, United States
www.nicoticket.com
I canceled that order from amazon and went with BJ's recommendation on lovepetal... Should be here soon so we will see. I love cotton on my RDAs because cotton is so thirsty, but I really want to love hemp. More to come on results shortly..Clark

Sent from my SCH-I535 VZW Samsung Galaxy S3 mod'd with AOKP using Tapatalk 2
 
Status
Not open for further replies.

Users who are viewing this thread