Kayfun LITE - Part 2
- Thread starter Dusty_D
- Start date
- th_trl_thread_readers 0
- Status
However unlike all the small parts of most atomizers this bad boy looks to be dish washer safe.
I assume, you've never used such a device to boil some water for your tea
R
*via Tapatalk
I assume, you've never used such a device to boil some water for your tea
R
*via Tapatalk
I don't think it's new to market. I think I remember seeing them in use in the 1960's. My Dad had a similar looking device although much larger but he called it a still.
After experimenting with different resistances. watts, and boost I finally found a home run and it's just what my first build was 1.5 ohm on 28 gauge. I've tried 1.2, 1.3, and somehow had a coil reading 1.4, but 1.5 at 9 watts and boost at either 2 or 3 gives me the best flavor on my Kayfun. It works just as good on my Kanger sub mini. My ejuices are for the most part 50/50 and after wasting time fooling around and trying to increase the wattage after reading all the posts on how great the vapes are at 15 and above watts I started lowering the wattage and found my sweet spot. To celebrate I ordered a bottle of 5 Pawns Gamit with hopes it's as good as the reviews have been. Love my Kayfun, but have to say the Kanger sub mini is a good backup.
I have found that a 28g microcoil, parallel 30g or twisted 30g around 1.4Ω - 1.6Ω provide the best flavour production on my Kayfuns at 12.5W . I do have a twisted 30g in my Kayfun mini that is a 2.1Ω and is only used for a Honey Tobacco juice at 12.5W off of my iPOW2 Kangertech battery.
Enjoy the Gambit!
I got a couple of 30ml bottle of a friends version of Castle Long and it is excellent, never as good as the original but very close.
Enjoy the Gambit!
I got a couple of 30ml bottle of a friends version of Castle Long and it is excellent, never as good as the original but very close.
I have found that a 28g microcoil, parallel 30g or twisted 30g around 1.4Ω - 1.6Ω provide the best flavour production on my Kayfuns at 12.5W . I do have a twisted 30g in my Kayfun mini that is a 2.1Ω and is only used for a Honey Tobacco juice at 12.5W off of my iPOW2 Kangertech battery.
Enjoy the Gambit!
I got a couple of 30ml bottle of a friends version of Castle Long and it is excellent, never as good as the original but very close.
Not sure what parallel 30g really means and at this point it might be a good idea for me not to know. LOL.
You single strand, single coil, 28 gauge coil works as good as anything out there Ping.
Just because something can be done doesn't always mean it should be done.
28g, 1.5 ohm on 2.4mmID? I'm gonna try that Bronzeping build tomorrow
R
28g, 1.5 ohm on 2.4mmID? I'm gonna try that Bronzeping build tomorrow
R
Actually it's 28 ga, 10 wrap, on 2.0mm diameter. You likely wont notice much difference if it were less wraps and a wider diameter.
Bronze made we several perfect 1.5 ohm coils. I'm just trying to duplicate them. I'm sure one day I will. Besides one leak my svoemesto has been perfect.28g, 1.5 ohm on 2.4mmID? I'm gonna try that Bronzeping build tomorrow
R
It's not still leaking is it Ping?
If you ever need coils you know I will send them to you. just ask if you need them.
Tis a small world indeed. I've played around (dialing in my favorite wattage flavor) and the winner for me has also been in the 9 watt range also.
Leaked that one time and one time only. I have taken it apart and reassembled a few dozen times and no leaking. I had to understand the importance of a tight seal. I'm not doing bad with my coil making but they do range from 1.2 to 1.5 ohms. Actually I used 8 wraps to arrive at 1.2 ohms. Still vapes best at 1.5.
It does amaze me how 9 watts works so well and all they keep coming out with high and higher wattage mods. My Provari P3 delivers more than enough power.
I'm over here at an even 10 watts, wondering if y'all would even truly notice the difference...
- Status
Similar threads
