- Status
looks awesome buddy! and you're welcome. just wish my damn 91% would get here
If it wasn't for you sir, I'd've never known and got it.
__________________________________________________
Ps.: I've also asked ECV to fetch the 91%, the Rocket and the Fogger v2
1. From here sir: CEV-Russian
2. 100% identical and interchangeable
3. Yes, the Russian 91%. And I've asked CEV to stock it as well.
OK. Now I get what all those terms mean surrounding the Russian. Thanks Q.
Salt Lake City Vapors has them in stock (or did) picked mine up at their B&M a couple weeks ago and love it. Here is the link to it on their online store Salt Lake Vapors » The Russian rebuldable atomizer
A bunch of places are bringing in the 91%, there was a bunch of preorders but there was some snafu that delayed them. I would guess the 91% will more available after the first of the month.
If it wasn't for you sir, I'd've never known and got it.
__________________________________________________
Ps.: I've also asked ECV to fetch the 91%, the Rocket and the Fogger v2
ahh good show. if the Rocket was cheap enough i would try it just for the helluva it. i have 2 fogger v2's coming. the reason for 2 is a long story... want one?
Those thunderboomers were a nice touch in your vid. And also marked the beginning of your leg tutorial. [/QUOTE] I was kind of not paying attention to exactly how much it was raining when I was doing the video so when that lightening crashed it caught me by surprise, really scared the juice out of me.
[/QUOTE] I was kind of not paying attention to exactly how much it was raining when I was doing the video so when that lightening crashed it caught me by surprise, really scared the juice out of me.
There's been some talk of this over the last few weeks. We've called them "pin ......" It's not bits of cotton, it's hot juice. I get it every once in a while. I don't know exactly what causes it or what to do about it other than to try to take slow, smooth draws.
I was kind of not paying attention to exactly how much it was raining when I was doing the video so when that lightening crashed it caught me by surprise, really scared the juice out of me.[/QUOTE]Those thunderboomers were a nice touch in your vid. And also marked the beginning of your leg tutorial.
At least we know the Kayfun is well grounded.
Mine is more like the photo, barely touching (if at all the bottom) and it stills fine. My first builds were seeping a bit through the airhole so I lifted them up (very similar to the photo) and that seem to have stopped the seepage.
KFL is too great and fairly easy build so I bought few gennys to torture myself. Popped bunch of coils yesterday
very weird. I know some get the dry hits while others do not. this brought me to think it all has to do with the position and length of wick. my wick tails are a bit longer then the one your describing and work fine. didn't think a tail that barely touches or maybe not touching at all would work, but it obviously does. also if your tail are barely touching or not at all then their not kind of near the slot, unlike mine. so maybe its not so much the length and position but more of the density and thickness of the tails?
Similar vacuum feed design as the KFL. Funky portals for viewing the tank, sorta matches my Uma. I'll be building it when I get home tonight.
that's pretty sweet. is it expensive? I love the poldiac.
Here, want expensive? Do a vid on this one vapdivrr. Maybe they'll rent it by the hour.
Otto Carter Engraved Brass Gear Mod - Otto Carter
Otto Carter Engraved Brass Gear Mod - Otto Carter
Here, want expensive? Do a vid on this one vapdivrr. Maybe they'll rent it by the hour.
Otto Carter Engraved Brass Gear Mod - Otto Carter
I have seen that one before. I wonder how many of them sold? to tacky imo
Indeed, right? If I were a trillionaire I still don't think I would buy that. Looks like a pair of those gaudy cowboy boots you get in Italy.
But then I like Damascus knives and those are every bit as gaudy. Go figure.
are we talking about the k-lite? if so this happened to me when I had the original drip tip in. not exactly sure if it was the tip or not because it was the first couple of builds when I first received the device. all I know is I rebuilt the coils a couple of times and changed the drip tip and it went away. could of been the coil, not sure. now from time to time I get a coil that sounds sizzley but no spitting, but maybe its close to spitting but just not quite reaching my lips, again I don't quite know for sure why some of my coils do this. I change coils every other day just to mess around with different builds and the sizzling goes away again. maybe its the height of the coil that makes this happen, or it could be the juice. I use a lot of different flavors and some may have more water in them which can make it sizzle. so all in all no more spitting but sometimes sizzle, but the sizzle doesn't affect the vape, weird.
You could be right about the coil height. More air the hotter it gets?
im with you there.Indeed, right? If I were a trillionaire I still don't think I would buy that. Looks like a pair of those gaudy cowboy boots you get in Italy.
But then I like Damascus knives and those are every bit as gaudy. Go figure.
I see that syringe you have, ever think about a pyrex one? I used to use the plastic ones until I found ntt glass syringe co. for like 12 bucks you get these sweet syringes. I have a 5ml and 2 ml. they are so smooth bro. actually they are about 12 bucks each.
makes sense. but now I use that file in the clipper so I will see if I get anymore sizzle.
I have a friend who works at a hospital and uses syringes all the time. She stuffed a ziplock full of them and gave them to me. Several kinds. As soon as it feels draggy I chuck it and grab a new one.
I'm sure those glass ones are smooth as silk.- Status
Similar threads
