Kayfun LITE

[BuzzKilla]

May i ask what the appeal of a Nano kit for the kayfun is?
doesnt that reduce capacity to ~1ml?

considering the pain it would be to fill the KF that often, wouldn't it be a wiser choice to go with a dripper?
or just take out the chimney completely and use it as a dripper... lol

 

[mattrhdr]

May i ask what the appeal of a Nano kit for the kayfun is?
doesnt that reduce capacity to ~1ml?

considering the pain it would be to fill the KF that often, wouldn't it be a wiser choice to go with a dripper?
or just take out the chimney completely and use it as a dripper... lol

It shortens the height by 1cm or more... I like my mods as small as possible.. I could care less about 1ml more juice. It takes me 2 minutes to fill my KFL. Unscrew the screw and shoot your juice in, your done. I don't see what the big deal is, I don't vape more than 4ml a day anyways

 

[jpcwon]

I ordered my first Kayfun from Vaperev yesterday. I'm a bit concerned about it not having an adjustable center pin. Can you guys w/ Provari's tell me how the fit is. I have a 91% which can be tweaked nicely w/ the Loki ring.

I have a KFL+ running on my Provari (with black delrin Loki Ring) currrently with zero issues....

 

[Brew mn]

Great...thanks! I have the delrin ring. Looking forward to trying it out.

 

[Dusty_D]

zna lde with kayfun lite using nano tank

You DOG!!! How'd you end up landing that?

I'd love to get my hands on a ZNA.

Nice grab Matt!

 

[Dusty_D]

I ordered my first Kayfun from Vaperev yesterday. I'm a bit concerned about it not having an adjustable center pin. Can you guys w/ Provari's tell me how the fit is. I have a 91% which can be tweaked nicely w/ the Loki ring.

Two Provari's, 4 Kayfun Lites and 1 new Lite Plus used with Sotong Pro Rings. No problem making absolute flush contact.

 

[vdaedalus]

I could care less about 1ml more juice.

So you care at least a little?

/thatguy

 

[mattrhdr]

You DOG!!! How'd you end up landing that?

I'd love to get my hands on a ZNA.

Nice grab Matt!

Just creeped the Facebook of electronicstix and may have been notified of when they were going up?

 

[crss]

Kayfun Quartz Standard Kit by Tarsius Customs, liking my mail person today.

So i goto put the glass tank on the kayfun in the picture. I am using a special seal in place of (c4) upper o-ring in the cap. The glass tank pops off of the metal rings. I know i can drop the oem oring back in and all should work. But to be honest, i am a little leery how easy the tank might "pop" open. I do not see this lasting long in my pocket. Any one here have some experience with the glass tank on there kayfun? I am still waiting on my SOV glass kit also.

 

[mattrhdr]

^ I was thinking about that happening when i was thinking of ordering one, it could pop off anytime and get juice everywhere.

 

[Akdare]

I ordered my first Kayfun from Vaperev yesterday. I'm a bit concerned about it not having an adjustable center pin. Can you guys w/ Provari's tell me how the fit is. I have a 91% which can be tweaked nicely w/ the Loki ring.

I have a Provari with the SvoeMesto ring, no issues...I think the tolerance on the Delrin ring from Loki varies...some fit fine, others not...

 

[Akdare]

May i ask what the appeal of a Nano kit for the Kayfun is?
doesnt that reduce capacity to ~1ml?

considering the pain it would be to fill the KF that often, wouldn't it be a wiser choice to go with a dripper?
or just take out the chimney completely and use it as a dripper... lol

I have the nano kit from rampage...my capacity was 1.5 ml, and, since I did not have a shorter chimney, only a couple of drip tips fit.

I changed it up a bit, and put on one standard ring, and one nano ring. Capacity 3ml, all drip tips fit, shorter atty...good compromise for me...

 

[crss]

Ok, so since i dont want to test the glass tank on my beater mod. I put the kit on my R91, as that usually stays home. No leaks, working good but time will tell. Filled it with Paladin Punch from Greenman.
Sitting on my v2 PAPS, next to TR switch n cap on a JM22 tube - KLite + SOV top cap

 

[vapdivrr]

Just tried something new in my kayfun. 8 wraps of .8 kanthal around a 1/16 inch object. produces a nice cool vape that is incredibly dense.

View attachment 307656

View attachment 307657

View attachment 307658

boy that's high, but with ribbon it probably balances out. i had tried ribbon on numerous occasions and just found it lacking in TH, so i imagine that's why you have it raised? well call this one hi o silver

 

[vapdivrr]

What's your screw postion?! ... that didn't come out right.

Umm... how far in or out do you screw your grub? ... that didn't come out right either!

Nevermind!

you dirty buggar. mine seems just about flush with the bottom of device. i did try taking it completely out when i first received it, just to see if the whistling would go away, well it did along with a little bit of juice, so i put it back.

 

[Dusty_D]

you dirty buggar. mine seems just about flush with the bottom of device. i did try taking it completely out when i first received it, just to see if the whistling would go away, well it did along with a little bit of juice, so i put it back.

I've backed mine up to flush with the bottom too. I tried screwing it all the way in, and while the whistling went away, it started to gurgle after using it for a few hours. I guess the restricted air supply meant more juice getting drawn into the chamber. Now, I have the slight whistle back.. but it's working as it should. *shrug*

 

[vapdivrr]

I've backed mine up to flush with the bottom too. I tried screwing it all the way in, and while the whistling went away, it started to gurgle after using it for a few hours. I guess the restricted air supply meant more juice getting drawn into the chamber. Now, I have the slight whistle back.. but it's working as it should. *shrug*

if i get a little extra time i might try that little beveling deal to see if it works. i guess by slightly beveling the inner end of that screw it stops it, but im really not sure.

 

[Dusty_D]

if i get a little extra time i might try that little beveling deal to see if it works. i guess by slightly beveling the inner end of that screw it stops it, but im really not sure.

Best of luck! If it works, we'll trade screws.. dammit, that didn't come out right, again!

 

[seven]

I just recieved my tobeco kayfun clone and i was wondering if anyone's center post goes in higher than the top of the neg/pos contact? Its about .75-1mm above the top. Ahh its hard to describe without pics. This is my 4th clone and never seen this. Ill take pics later once I finish the last of my Grenada

Sent from my SGH-T889 using Tapatalk

 

[Infinite]

Best of luck! If it works, we'll trade screws.. dammit, that didn't come out right, again!

if i get a little extra time i might try that little beveling deal to see if it works. i guess by slightly beveling the inner end of that screw it stops it, but im really not sure.

Not sure if anyone else had tried this, but I just took one of my jewelers Phillips screwdrivers and gently opened up the air hole on the side. Applying pressure to the outer rim. What this does is create more of a funnel (smooth) path for the air to enter. Totally killed the whistle.

May be worth a try, u also get the added benny of a slightly larger air hole that u can now adjust more finely with the air screw. Hope this helps for others.

Sent from my SGH-I337 using Tapatalk