Kayfun LITE

[horton]

Probably Nitrile

Thanks..... appreciate the help. Was surprised at what those little buggers cost.....but they are necessary. Has anyone actually worn one out yet? Mine is holding up nicely, but I do want spares around. I fill 2 - 3X / day and am waiting to shred the O-ring or lose both that microscopic screw and the sub-atomic O-ring.....

 

[Akdare]

I just ordered a bunch of o-rings from McMaster-Carr for my KFL, and other stuff. http://www.mcmaster.com/#catalog/120/3508/=rpyleq

The o-rings are spec'd by ID & thickness. All dimensions below are mm. Sold in packs of 100. But really inexpensive. They ship fast.

Fill screw: 2 x 1
Chimney: 5 x 1.5
Base, sections: 18 x 1

 

[TheKiwi]

I just ordered a bunch of o-rings from McMaster-Carr for my KFL, and other stuff. http://www.mcmaster.com/#catalog/120/3508/=rpyleq

The o-rings are spec'd by ID & thickness. All dimensions below are mm. Sold in packs of 100. But really inexpensive. They ship fast.

Fill screw: 2 x 1
Chimney: 5 x 1.5
Base, sections: 18 x 1

You're a life saver <3


In case anyone is wondering, I was thinking of using it to let me adjust how much my center post screws in, so that I can align the center post air hole with the base's air hole. Hope it works!!


Burping out loud using Tapatalk

 

[tnt56]

I just ordered a bunch of o-rings from McMaster-Carr for my KFL, and other stuff. http://www.mcmaster.com/#catalog/120/3508/=rpyleq

The o-rings are spec'd by ID & thickness. All dimensions below are mm. Sold in packs of 100. But really inexpensive. They ship fast.

Fill screw: 2 x 1
Chimney: 5 x 1.5
Base, sections: 18 x 1

Are these specs for the KFL lite?

And I also want to thank you.


Sent from my iPhone using Tapatalk

 

[Akdare]

Are these specs for the KFL lite?

And I also want to thank you.


Sent from my iPhone using Tapatalk

These are for the KFL+, but I'm pretty sure they are the same for the KFL, too.

I did already trade out the o-rings on my 2 older KFL+'s. They work perfectly.

I finally sat down and measured all the o-rings in all my attys and drip tips and made a little spreadsheet. Wish I'd done it sooner.

 

[tnt56]

You just rocked my world. Thank you so very much. I'm needing "O" rings for all mine.

Is it possible you have the dimensions backward for the fill screw. I just looked and didn't see any 2X1,, but did see some 1X2? Really want to make certain before I buy that many of the wrong size.

 

[TheKiwi]

I think it's 2mm inner diameter and 1mm width. It's pretty much the very first entry in that webpage. 9262K101

ETA: Akdare I wrote a blog post in honor of you and your contribution hehehehe)

Burping out loud using Tapatalk

 

[tnt56]

Got it. Thanks again to all.

 

[want to quit]

Hey guys,

Had a question. Was looking to buy a kayfun lite for quite some time now. Emailed with svöemesto to ask some questions and now there is one big question left.

How in the freaking world do I know it's authentic and real? There are so many clones out there I start to be really upset about it.

I even see clones that have the design in Russia made in German"Y" logo on the bottom.

If anyone could point out to be how I can ensure it's real that would be great.

 

[TheKiwi]

There's pretty much only one way to know for a fact it's genuine: you buy it from authorized vendors like vaperev or intaste.

Anything else is always gonna be a tad of a gamble, considering how there are clones with all the right markings.

Same reason why I'll never buy an atomic or trident rda even on the classies unless I know the member personally.


Burping out loud using Tapatalk

 

[finagle69]

Kinda makes me sad. If I wanted to sell mine on the classies, I'd have to dig up the invoices from SV or Vaperev and put them in the FS thread. Even that isn't 100%.

 

[TheKiwi]

Lol I guess if you wanna sell the v2.... The new design hasn't been cloned YET. So it wouldn't be as bad. The original kfl+ though.... That's been cloned left right and center


Burping out loud using Tapatalk

 

[ian91]

Would it be possible to get a link to your spreadsheet? I have been trying to find o-ring sizes for all of mine (Taifun GT & GS, Ithaka, Kayfun 3.1, Lite, Lite+, Squape, Magoo, Fogger V2, V3 and V4).

 

[KAS129]

101 Vapes has an Ehpro clone of the KFL V2 on their site right now. Even has the new drip-tip, updated topcap and bottom markings. Sure didn't take long. Pretty much the only way to be reasonably sure is to buy from an authorized dealer. I wouldn't even buy one from somebody I know personally, if I was worried about authenticity, for fear they don't know they bought a clone. I guess it just comes down to "You pay your money and take your chances" nowday's.

 

[TheKiwi]

LOL well. Did not know that hahaha


Burping out loud using Tapatalk

 

[Akdare]

Would it be possible to get a link to your spreadsheet? I have been trying to find o-ring sizes for all of mine (Taifun GT & GS, Ithaka, Kayfun 3.1, Lite, Lite+, Squape, Magoo, Fogger V2, V3 and V4).

I'd be happy to get you a link, but the only ones I have that you have are the Kayfuns that I already stated size. I just measured mine with a caliper. Measure ID & thickness, in mm. The McMaster-Carr page that I linked to earlier is all metric, so that's the page you want.

 

[want to quit]

Thanks for the help guys that's what I figured. Guess it's waiting for them to come back for sale

 

[JulesXsmokr]

Sorry it took so long for me get here, I had to buy 2 KFL plus black editions first, before making the leap to the real deal. Ordered the v.2 from Vaperev on Friday night.
I can't wait to coil that baby up!

 

[TheKiwi]

Ah welcome welcome!


Burping out loud using Tapatalk

 

[kas122461]

Thanks for the help guys that's what I figured. Guess it's waiting for them to come back for sale

They are in stock here.

Vaperev Shop - Kayfun Lite

KAS