Kayfun LITE

[abstrakts]

and where again did you get that kit? if the glass threads onto the base and cap; im highly curious.

I have yet to purchase one yet, I'm still trying to figure out which one exactly I'm looking for. I found this 24x22mm one on Vaperev (Vaperev Shop - Kayfun Nano M-Tank Short 24mm x 22mm) and a 28x22mm one on Science of vaping (Nano Size Polycarbonate Tank - 28mm – Science Of Vaping)

 

[Fir3b1rd]

I have yet to purchase one yet, I'm still trying to figure out which one exactly I'm looking for. I found this 24x22mm one on Vaperev (Vaperev Shop - Kayfun Nano M-Tank Short 24mm x 22mm) and a 28x22mm one on Science of vaping (Nano Size Polycarbonate Tank - 28mm – Science Of Vaping)

oh, those are both plastic tanks... i thought you were looking at glass...
most of my kfls have the plastic M-tanks... i went through fasttech and kidney puncher for mine. They are cheaper at those two from what ive seen. Ive gotten both nano and full size versions. they are nice, i like not having the SS rings on the top and bottom,. makes it easier to see the liquid level.

 

[Fir3b1rd]

I have yet to purchase one yet, I'm still trying to figure out which one exactly I'm looking for. I found this 24x22mm one on Vaperev (Vaperev Shop - Kayfun Nano M-Tank Short 24mm x 22mm) and a 28x22mm one on Science of Vaping (Nano Size Polycarbonate Tank - 28mm – Science Of Vaping)

i have one of thes on my ehpro V2, one of the authentics and a spare backup. probly my favorite version in the nano size. the tank is transluscent which gives it a slightly different vibe.
Tobeco Kayfun Lite Nano Clear Kit - Kidney Puncher

that nano kit on my provari mini is really nice looking- its the perfect formn factor for a small run around unit.

this is the one i have on my full size KFLs... its totally clear and gives the kfl the look of being a little smaller. kinda cool.
Search results for: 'kayfun'
both versions have done well.

 

[KTMRider]

i rarely buy premade juice anymore. I did just get a bottle of grandmaster and mothers milk though. typically i vape DIY.
ive been lucky to, over time, gather a decent inventory of clones and authentic KFLs; so for me, at this point id rather spend 45 bucks on an authentiuc base than 30 on an ehpro clone, i have. that said: i find ehpro to be the best out of any of the KFL clones, in both build qality and performance. i just dont have any reason to build up any more. i probably wouldnt bother anyway but i was considering taking a tobeco clone with a messed up posistive block and making it an authentic base; all the parts will work.

I usually buy e-juice and mix flavors. I sometimes add VG if it's too strong. How's Mother's Milk? I've been thinking of trying that.

I have an EHPro KFL and a Fasttech 3.1 clone (the better one, supposedly). The chimney on the 3.1 isn't perfectly centered so I pinched the o-ring on top once and leaked a tank of e-juice. I also found some milling flash inside the air passage that I scraped out with a pick. When it works, it's awesome but there are some issues. The EHPro is perfect with no issues. I might pick up a EHPro KFL+v2.

 

[Fir3b1rd]

I usually buy e-juice and mix flavors. I sometimes add VG if it's too strong. How's Mother's Milk? I've been thinking of trying that.

I have an EHPro KFL and a Fasttech 3.1 clone (the better one, supposedly). The chimney on the 3.1 isn't perfectly centered so I pinched the o-ring on top once and leaked a tank of e-juice. I also found some milling flash inside the air passage that I scraped out with a pick. When it works, it's awesome but there are some issues. The EHPro is perfect with no issues. I might pick up a EHPro KFL+v2.

ehpro is as closer to authentic in quality than any of the clones.... and when you consider the price in realtion to the FT clones its well worth it. the two FT clones i bought are terrible., for 35 bucks off ebay ehpro is the way to go if youre going to go clone. if you want a clone thats got some useful modifications the black edition hands down, more airflow and easier to fill. the black editions are great to throw on a mech. you just dont want to subohm to far and melt the insulator. i try and stay at or above 0.8 with that one. if you wanna jazz up the finish on your ehpro hit it with some compund wax and polishing wax.

mothers milk is pretty good; its the only thing my fiance will vape, she loves it. its almost like a strawberry custard, more custard than strawberry. i like it ok; but im more into the darker vanillas and caramels than sweet. i wouldnt but it afain for myself. but the kings crown line from suicide bunny has a flavor called claim your throne; that is more me.... sweet custard with a brown sugar finish... awesome flavor!

 

[MwSlim]

I have MM and OG from Suicide Bunny that I cant even vape and I love custards. It stopped me from trying the rest of the line

 

[Kyi]

What's the difference between the V1 and V2 versions of the KFLs? I've seen V3s too and some with dual air and bigger air holes... I'm itching to buy another Kayfun so I'm trying to figure out which one to get. One that is compatible with a standard nano kit.

 

[Robinowitz]

Kyi: I copied this from the VapeRev website. Hope it helps. This is info on the authentic KFL+(Svoemesto)
The Kayfun Lite Plus (Second Batch), by SvoëMesto, is precisely machined in Germany using stainless steel. This compact Kayfun is durable and looks fantastic on any device of your choice. Aside from the appealing aesthetics, the Plus is incredibly easy to rebuild, enhances the flavor of your e-liquid, and produces a healthy amount of vapor! The Kayfun Lite Plus (second batch) brings a couple key changes to the table that make the atty more versatile to accommodate your needs. SvoëMesto has added adjustable airflow to the Plus, making the atty more adaptable than before! The fill valve has also been recessed further into the bottom cap to allow the top of your juice bottle to make a more efficient connection with the valve and prevent wasting juice. An O-ring has also been added to the fill valve screw, ensuring a leak-proof seal! The Kayfun Lite Plus (second batch) features a newly designed removable drip tip, top cap and revised engravings on the bottom of each atomizer. Includes both a stainless steel and Makrolon center tube, allowing visibility of your juice level. The Kayfun Lite Plus will satisfy your needs while making a stylish statement!

 

[TheKiwi]

What's the difference between the V1 and V2 versions of the KFLs? I've seen V3s too and some with dual air and bigger air holes... I'm itching to buy another Kayfun so I'm trying to figure out which one to get. One that is compatible with a standard nano kit.

I'm assuming you're referring to the clones?

At this point, the sheer variations in clones makes it almost impossible to definitively define a v1 v2 or v3 without stating the makers and some key features.

On the other hand for authentics, there are only the full sized kayfun (which I believe is no longer in production, the kayfun lite, kayfun lite plus and the second generation of kayfun lite plus.

The kfl+ differs from the kfl in that it has one airflow control. The kfl does not have AFC.

The second generation of the kfl+ is identical to the first kfl+ except for:

1) redesigned drip tip
2) redesigned top cap where the internal oring now sits in a "catch" area within the top cap.

 

[TheKiwi]

For the clones, in a broad stroke 90% of the clones are physically the same as the first gen of kayfun lite plus.

Some of the more successful clone makers, such as hcigar, ehpro and custommodcreation (who came up with the black edition clones) have gone on to make a second iteration, typically labeled a v2. These typically have a larger airhole (2mm), tho not necessarily all.

Some of them have also gone on to the 3rd iteration. Many of the third iterations involves changing the design to copy that of the kayfun life plus second gen: different drip tip and top cap.

Of course, some others have taken it farther, such as ehpro, who came out with the dual airflow version just recently. (Which btw is useless, since the total airflow is still restricted by the center pin inner diameter)

 

[Cullin Kin]

Just joined the Kayfun Lite Plus V2 Club today! My first build is a 1.6 ohm single coil and I have to tell you, I absolutely love this thing! The flavor is amazing, and coming from dripping only for the past year, it's nice to not have to refill every five hits. Yet I still get to play around with rebuilding! The best of both worlds.

I get my DNA 30 today (I guess it's 2:24am now) and I can't wait to try the Kayfun DNA 30 setup.

Got a little artistic with the picture lol

Have any of you found what you believe to be the 'sweet spot' for a build on a Kayfun Lite Plus? I'd love to know!

 

[TheKiwi]

Izzat a gold infinite clone? :O

 

[Kyi]

So the Ehpro clone is the best? I think I currently have a Tobeco and Hcigar clone, both of them work well for me but the Hcigar one is nicer.

Sent from my HTC One using Tapatalk

 

[TheKiwi]

The ehpro clones have had great reviews. If I had to recommend getting a clone, it would be either an infinite, ehpro, or custommodcreation's black edition.

 

[Cullin Kin]

Izzat a gold infinite clone? :O

It's the EHPro Clone and the local shop I bought it from had them 24K gold-plated. It came with a certificate of authenticity for the gold plating and at a price of $49.99, I couldn't resist!

 

[horton]

The ehpro clones have had great reviews. If I had to recommend getting a clone, it would be either an infinite, ehpro, or custommodcreation's black edition.

I'll second the Ehpro KFL+ clones from personal experience. The parts are interchangeable with a SV device but the machining just isn't quite up to the European stds. They work fine and I've yet to encounter any problems with the devices -- all problems have been "self induced". And as Kiwi so elegantly stated.... the dual air hole model is useless......

 

[KTMRider]

Just joined the Kayfun Lite Plus V2 Club today! My first build is a 1.6 ohm single coil and I have to tell you, I absolutely love this thing! The flavor is amazing, and coming from dripping only for the past year, it's nice to not have to refill every five hits. Yet I still get to play around with rebuilding! The best of both worlds.

I get my DNA 30 today (I guess it's 2:24am now) and I can't wait to try the Kayfun DNA 30 setup.

Got a little artistic with the picture lol

Have any of you found what you believe to be the 'sweet spot' for a build on a Kayfun Lite Plus? I'd love to know!

I haven't had mine long but I found the sweet spot (for me) to be around 1.5 - 1.8 ohms. I'm playing with 1.5 but battery life is a bit lower so I'm gonna go back to 1.7 or 1.8 ohms.

It's the EHPro Clone and the local shop I bought it from had them 24K gold-plated. It came with a certificate of authenticity for the gold plating and at a price of $49.99, I couldn't resist!

Nice! I bought a black one at my B&M for $50 but with 10% off, 30 ml of e-juice and help building it, it was competitive to the ones on ebay (EHPro's) and I didn't have to wait for it. I also have a clone from Fasttech and the EHPro is much better finished and less prone to user error (better overall fit).

 

[Midniteoyl]

Um. I have vaped some of the gunkiest NETs around with a microcoil. And they most certainly work fine. So have many other folks in the mega NETs thread. So. Yeap.


Burping out loud using Tapatalk

Ya, but not without rewicking every 2 hours or so... I dont consider that a success.. I need at least one full tank, and 2 is better.

I can get 2 full, flavorful, tanks with the open coil.

 

[Midniteoyl]

Thanks for the advice. I also want to riterate that I am going on a half a tank of home made Cavendish net with the "macro gapped" coil with no signs of slowing down. I think it could go a couple tank fulls before re-wicking. I forgot who posted about it first but its been a life or should I say Kaylite saver.

Welcome

 

[Midniteoyl]

It's a separate piece from the nano kit. It's a short tank for the Kayfun. I'm trying to get this look:

When I look up short tanks for Kayfun's, I found this 24x22mm one on Vaperev (Vaperev Shop - Kayfun Nano M-Tank Short 24mm x 22mm) and a 28x22mm one on Science of Vaping (Nano Size Polycarbonate Tank - 28mm – Science Of Vaping) Just wondering if like only one works without any addition pieces but the other one needs a longer chimney or something.

Which KFL do you have? EHPro makes one for their version of the v2.. Not sure if it fits others.