Kayfun LITE

[Agnes Black]

Just ordered a EHPro KFL+ V2 black today

Found a site with the quartz M size tank assorted colors of glass.

NOW I just need to find a new top section that's SS/black and I'll be set n ready!

Kayfuns are an addiction due to all the parts and cool stuff you can do to them. Next on the list is a colored black nano kit muuuuuahahahahahahaha!!!

 

[Agnes Black]

PS, who makes the best plastic M tanks? I cracked the clear one that came with my SS EHPro KFL+v2 2nd time I used it :/

 

[TheKiwi]

PS, who makes the best plastic M tanks? I cracked the clear one that came with my SS EHPro KFL+v2 2nd time I used it :/

Not smth you'll hear everyday buuuut.

I buy all my m tanks from fasttech. I have dropped my atties a gabillion times easily and they've all held up. Funny thing is I expected them to break super easily and ended up buying 10 spares. But nope. Haven't had to use a single spare yet.

 

[regal55]

[

It takes about 1/3 of a tank for some reason, but the tastes on my gapped coil is actually better.

I just built a gapped coil at a lower resistance and you are right it tatses just as good. This is a Newminster #47 Cavendish and the flavor is wonderful. Side by side with my aerotank it beats it by a mile. I can't believe a wasted so much time and got so disgruntled with heated pinched coils. I can't thanks you enough for sharing this gapped method.


On another issue. I bought one of the $16 fastech KFL specials.

It has three holes on the side. One looks like the air hole, the other the airflow adjustement.

The last hole is cut at a large angle and the tank came with a long screw that looks like its for that hole, is it the fill hole?

 

[TheKiwi]

Alright folks. Heads up. Go check your bank statements!

Over the course of the past 3 months, there have been multiple $49.95 charges made to my card that I use solely for vape-shopping.

Initial charges were made by a Ieptcs Com, and consists of a $49.95 charge and another $1.50 charge.

Subsequent charges of the same exact amount were made by a Support.com.

I've checked with BoA And there's a rising number of reports about it. Please check and if your account has been compromised, report to the bank and have a new card sent out to you.

That is all

 

[regal55]

This is the $16 fastech clone.

Is this a fill hole, the other two holes look like the air hole and adjustment, there are no holes on the bottom.

 

[TheKiwi]

Can't seem to view the picture :/

Edit: whoops now I can

 

[TheKiwi]

If that's a 3.1 clone, then it should be the fill hole

 

[Midniteoyl]

Alright folks. Heads up. Go check your bank statements!

Over the course of the past 3 months, there have been multiple $49.95 charges made to my card that I use solely for vape-shopping.

Initial charges were made by a Ieptcs Com, and consists of a $49.95 charge and another $1.50 charge.

Subsequent charges of the same exact amount were made by a Support.com.

I've checked with BoA And there's a rising number of reports about it. Please check and if your account has been compromised, report to the bank and have a new card sent out to you.

That is all

That sux.... I dont have any extra charges, but I do get a crap load more spam and even had a couple of calls from 'Microsoft' telling 'my computer was infected'

 

[ricks]

I love messing with those people...

That sux.... I dont have any extra charges, but I do get a crap load more spam and even had a couple of calls from 'Microsoft' telling 'my computer was infected'

 

[TheKiwi]

That sux.... I dont have any extra charges, but I do get a crap load more spam and even had a couple of calls from 'Microsoft' telling 'my computer was infected'

Yeaaah. So far I've found 6 other vapers who have been affected by it. Well good that you didn't get affected!

 

[Midniteoyl]

Yeaaah. So far I've found 6 other vapers who have been affected by it. Well good that you didn't get affected!

Might be worth it to see what vendor you all have in common... One thing I saw once was to use the 'second line' of the address to enter a unique code for each vendor.. Something like:

12345 Any Street
RefA

Then you can at least keep track of who is selling your info, and, if it happens to show up on the fraudulent billing too, then you know who did it.

 

[Aal_]

Might be worth it to see what vendor you all have in common... One thing I saw once was to use the 'second line' of the address to enter a unique code for each vendor.. Something like:

12345 Any Street
RefA

Then you can at least keep track of who is selling your info, and, if it happens to show up on the fraudulent billing too, then you know who did it.

That's smart dude!

 

[Spazzer]

Alright folks. Heads up. Go check your bank statements!

Over the course of the past 3 months, there have been multiple $49.95 charges made to my card that I use solely for vape-shopping.

Initial charges were made by a Ieptcs Com, and consists of a $49.95 charge and another $1.50 charge.

Subsequent charges of the same exact amount were made by a Support.com.

I've checked with BoA And there's a rising number of reports about it. Please check and if your account has been compromised, report to the bank and have a new card sent out to you.

That is all

I also have a BoA credit card and they have a service that will generate a one time account number (with a set $ limit) for use online. Your regular account number is never seen by the vendor. I use this whenever I order anything online.

 

[Midniteoyl]

I also have a BoA credit card and they have a service that will generate a one time account number (with a set $ limit) for use online. Your regular account number is never seen by the vendor. I use this whenever I order anything online.

Lotta cards use to do this.. With the advent of the fraud protection laws, most decided to drop it.

 

[Bronze]

When you coming home Kiwi?

 

[TheKiwi]

When you coming home Kiwi?

21 aug!!!

10char

 

[Bronze]

21 aug!!!

10char

WooHoo!

10 char

 

[Cybernated]

Help, I'm at a total loss here. I bought the Hcigar KFLv2 recently and as soon as I screw the chimney on it goes to shorted on my DNA. Without the chimney on it will read and fire. Has anyone heard of this happening if so is there a solution?

 

[TheKiwi]

Help, I'm at a total loss here. I bought the Hcigar KFLv2 recently and as soon as I screw the chimney on it goes to shorted on my DNA. Without the chimney on it will read and fire. Has anyone heard of this happening if so is there a solution?

Welp. Sounds like either one or both if the screws on the deck is touching the cylindrical chimney section. Likely the negative. Happens when they put on a screw with a larger diameter head.

If that's not it, there is a chance that the threaded section of the top chimney portion is too long, and it's touching the negative post screw.

If it shorts out when the entire chimney section is on, but doesn't when only the cylindrical section is on, then it's definitely the latter.