Kayfun LITE

[liveone]

well i'll be dam. no one wonder, my russian is perfect but my german is non existent


Edit: wait that made no sense. Ahh whatevers. " I take 2 shots in the morning, I take 2 shots at night"

My german is very weak at best but I found I could read everything on the Intaste site without any problems.

Then I realized chrome was auto translating to english.

 

[chillaxing]

One from their last batch landed up in Canada alright... so, I guess, it's all good

was asking cause the 2 that i ordered from last batch got here with no problems that some people are having. so just wondering if i should order from them again when its back in stock.

 

[speedemon]

I ordered again suppose to be hear Monday I also bought 2 in the last round and mine did not get held up. Intaste is awesome and they will do there best to take care of you no one can predict what customs might do.

 

[1w15h1w45m0ngu]

Didn't they send out too many products a day to the U.S. or something along those lines? I think there was some sort of export law and that's why the packages from the second run were held up. If that's true then it was Intaste's fault for ignoring or being ignorant to the law and customs was just doing their jobs but I forget the specific reason the packages were held up. It's somewhere in this thread.

 

[crss]

Regarding Intaste, that I LIKE. I received this response about shipping delay 7-18.
everything is fine with your payment!
Poorly we couldn't ship yet. Germany has a new law. We are allowed to ship only 1000€ per day par country.
We shipped all orders in the order of their arrival.
We can ship your order today or tomorrow i think

Best regards from Germany,
Christina

I like Intaste & will purchase from them always. No missing parts in my LITE's like some other local vendors.

 

[donnah]

I'm ready! LOL I don't think I've ever looked more forward to a Monday!

 

[qorax]

I'm ready! LOL I don't think I've ever looked more forward to a Monday!

LOL
BTW, that setup looks good. I'd wrap one more round though.

 

[Catharlex]

Sup Catharlex! Just saw your post on reddit. These things are awesome!

Oh hey, another fellow Redditor!

Yeah man, this thing has rocked my world all day long. It's absolutely insane; better flavor than any of my drippers, genny's, ad everything in between... Even when using the same wicking material! (XC116) I'm highly impressed by the design of this thing and the overall performance, even at sub ohms. I'm gonna try tossing dual coils in the Kayfun Lite once I need to rebuilt again. Hoping for an even more magical experience.

 

[Ryd1ZZ]

Oh hey, another fellow Redditor!

Yeah man, this thing has rocked my world all day long. It's absolutely insane; better flavor than any of my drippers, genny's, ad everything in between... Even when using the same wicking material! (XC116) I'm highly impressed by the design of this thing and the overall performance, even at sub ohms. I'm gonna try tossing dual coils in the Kayfun Lite once I need to rebuilt again. Hoping for an even more magical experience.

I rebuilt one of mine today using the method you posted. It's working great! The captain ron, for whatever reason, has trouble in tanks. Not anymore! Even with a fresh battery, it's wicking like a champ.

Let us know how the dual coils work, and the configuration. I've wanted to try it, but so far single coil is working really well.

 

[ZANKURO]

I totally regret not ordering one when I had the chance.

 

[anotheraznguy]

sooo, anyone try and make the tank bigger for the kayfun? is it possible?

 

[Covert]

Just wrapped my 1st Bamboo instead of 2mm ekowool wicked coil on my lite, and am now fully in love with this thing. Works like a charm no burnt vapes, great taste. Lovin it

 

[CGustav]

I also sent Vaperev an email on the spares, I'll post their reply when (if?) it comes in.

First impressions, compared to Ithaka, Terminator-C and RSST, this is a breeze to setup - just a couple of minutes to do the coils, and you're done - no leaking, no mess. About as easy as an Igo-L, so a big thumbs up on that. Vape, seems good but only if I partially block the side hole. Any tips on how I can make the hole smaller -it's too airy and I don't get a strong enough hit as is.

View attachment 233232

I find the draw to be perfect. My coil and wick are very close to the airhole and standing relatively thick, so maybe that's a parameter you can adjust the airflow with?

 

[SteveW]

InTaste have these . . . adjustable airflow drip tips:

Air Control Drip Tip - InTaste

 

[Tennovan]

I've got mine set up with 2mm ekowool in a special 8, 30g kanthal, 5 wraps @ 1.8 ohms. Took about half a day to break it in but this thing is awesome! The flavor just keeps getting better. It's a little more airy than I'm used to but I'll adapt because it's just that good. I think my next build will be 4 wraps... gonna shoot for 1.5 ohms.

I am noticing a tiny bit of liquid on the bottom which I'm assuming is from the fill screw. It's not enough to really bother me though. I'm gonna try a little teflon tape tomorrow which, from what everyone is saying, should fix the problem.

In the end, if you don't have a Lite yet and are on the fence, just go ahead and get one. My carto tanks are officially in retirement.

 

[liveone]

I find the draw to be perfect. My coil and wick are very close to the airhole and standing relatively thick, so maybe that's a parameter you can adjust the airflow with?

I experimented with this a little. I ran some wicking material under the coil and over the airhole to see if it reduced the draw. But when the wick (cotton) bloated up, it almost blocked airflow entirely. I like the unimpeded draw anyway so that's the extent of my testing.

I'm getting such flavor and vapor that it's almost like the mouthfeel of biting into a dessert. Instead of eating a candy bar, I vape a diy reeses juice and getting satisfaction. Just lost 5 pounds. Lmao!

 

[Tennovan]

Just got this email from VapeRev regarding the spare parts missing.

Unfortunately the Kayfun Lite's we received from Svoemesto do not come with extra o-rings or screws. We were not aware of this till the day we received them and released them online. From what we were told, this is to help keep their cost down and allowing us to sell at the suggested retail price, helping make the Lite more cost efective. The extra o-rings and screws can only be obtained if your Kayfun Lite was purchased directly from Svoemesto. If you still wish to purchase spare o-rings, we do sell them for the 3.1 which will work in the Lite as well. Those can currently only be purchased in store or by calling us at 562-653-4730. We are waiting to receive our inventory for web department and hope to have the o-rings in stock soon. Should you have any further questions, please let us know so that we may better assist you. Thank you for your business and have a great day.

Best Regards,

Vape Rev Team

So the $2 spare parts were removed to keep the price down? Why did I pay $15 more than InTaste then?

 

[aziffel]

I ordered mine Tuesday morning right after getting up and seeing the email. Fedex said my scheduled delivery was Friday.. the Thursday it changed to Monday. So far it just says In Transit. Keeping my fingers crossed

Mine too.
Yall are right,the lite will make your genny's collect dust.I been using genny's only for over a year.I didn't think a fiber based wick,either silica or xc,would ever beat a genny,but this did.But,I still prefer a genesis atty with a SS wick for menthol vapes.

 

[hadouken]

This is so lame. I bought locally from a shop here in San Diego. They gave us the spare parts kit.

 

[hadouken]

KL on Provari with ring and Twins cap.