I just used one of the new replacement screws and I've never gotten a leak and I only tighten it with a thin micro screw driver.
- Status
exactly. I also had the slight leak issue at first, I tried the tiny o ring and it worked ok, it didn't leak but the o ring kind of was popping out the sides and eventually got squished. I then replaced the screw and wala.
I might. The price is the same as the regular KFL, so, why not? The only thing I believe I might not like is if I can't keep using my bottle tips against the new fill hole since I don't use syringes to fill nor empty my KFL. And I'm hoping the air control screw doesn't present a new point of failure for leaks as well.
could not stand the tight draw of the kayfun so today I took a gamble and drilled out the air whole to 1/16 so far so good draw is much better and having no wicking or flooding issues , make sure to remove center post before drilling .
Probably not. I've got 2 kfls and a russian 91% on the way.. that's enough for me. I like the draw on the one's I have.
the draw is fine if you mouth inhale but very tight for lung inhale and iv gotten so use to rda's that going from an open draw lung inhale to the kayfun was just not doing it for me getting good performance from my modified kayfun and the draw is much better also vapor production was raised with the increase of air
Ordered mine a couple of hours ago from InTaste, now to see if customs decides to make a play on me
offtopic, thx qorax for for all your reviews on FT products
Ordered mine a couple of hours ago from InTaste, now to see if customs decides to make a play on me
offtopic, thx qorax for for all your reviews on FT products
Intaste is the best and fastest shipping from Germany you will find. I get mail from them to Buffalo NY faster than a domestic order!
How do you do a 'direct' lung inhale?
I could never do it with cigarettes or pipes earlier as well
A 'pull' to the mouth and then a subsequent inhale seems 'natural' to me. I prolly am outdated, out of touch with reality√
How do you do a 'direct' lung inhale?
I could never do it with cigarettes or pipes earlier as well
you just take the vapor straight in as you inhale just like taking a breath through your mouth it takes a bit to break the habit of inhaling like you would a cigarette but after you get use to it its natural
Was it hard to drill out?I don't feel that the draw is too tight to use,but it is tighter than any of my genny's.They draw just right for my use and I have drilled them all to 1/16 if they weren't already.
I inhale like that with the KfL. But I find it better with something other than the stock drip tip. My favorite drip tips for the KfL, oddly enough, are the ss ones that used to come with the first DIDalikes. The drip tip was about the only good thing about them.
I gotta say...I've had my KFL for more than two months. I have yet to experience a dry hit, flooding, or a single drop of leakage. The fill hole screw has never failed. The air draw is perfect. Never had a single issue with rebuilding it. The drip tip is perfect. It is, by far, the most fuss-free device I have owned. And of course the vape quality is unsurpassed. SM can monkey with the design all he wants and I can look at a thousand different KFL setups but I have no reason to change a thing. God wanted me to have a Kayfun.
Life is good.
Life is good.
I gotta say...I've had my KFL for more than two months. I have yet to experience a dry hit, flooding, or a single drop of leakage. The fill hole screw has never failed. The air draw is perfect. Never had a single issue with rebuilding it. The drip tip is perfect. It is, by far, the most fuss-free device I have owned. And of course the vape quality is unsurpassed. SM can monkey with the design all he wants and I can look at a thousand different KFL setups but I have no reason to change a thing. God wanted me to have a Kayfun.
Life is good.
Told ya!
nothing but the best for the Gen!Sent from my iPhone 5 using Tapatalk
Yep, all my HHV Army friends talked me into it and I will be forever grateful. Thanks fellas!
no wasn't hard to drill out at all removed center pin and just went nice and slow on the drill out washed it out in my usc put it back together done
- Status
Similar threads
