Kayfun LITE

[Akdare]

el dee,

I wrap a 1.8ohm on a 3/32”...6 wraps of 30g...cotton ball in my KFL. In my experience, the 30g heats up quicker...and it's not the wick that lasts longer, it's the one that tastes better. The coil will need to be dry burned before the wick really needs to be replaced. I dry burn every other tank full, and, since you can't dry burn cotton, rewick as well.


Sent from my iPad

 

[Jerms]

I read in another thread someone who does a standard rolled cotton wick, and adds more material from the deck over top of the coil for better flavor. Anybody have any experience with this? I think I read having the coil a little higher from the airhole when doing this too.

 

[francomakou91]

The top part won't unscrew from the m tank. Anyone have any idea how to loosen it up?

Sent from my SGH-T889 using Tapatalk

 

[Iowa Gal]

Happy Birthday Q...hope you have a good one..

 

[JD1]

Happy birthday Q. And many, many more.

 

[Paul.K]

The top part won't unscrew from the m tank. Anyone have any idea how to loosen it up?

Try soaking it in some hot water for a while then get a wide rubber band or wear rubber gloves to twist off. I wouldn't grip too tight on the M tank tho.

 

[Dusty_D]

The top part won't unscrew from the m tank. Anyone have any idea how to loosen it up?

Sent from my SGH-T889 using Tapatalk

Elastic bands, one on each part will help with the grip to twist it off. Always works for me..

Edit: Whoops, just noticed that Paul kinda already made the same recommendation.

 

[Dusty_D]

Current build on all 3 KFL's. 28g wire, 11/12 wraps around 5/64 drillbit, 1.6ohms. Single strand of 100% cotton yarn for the wick. Yarn was prepped by boiling twice for 15 minutes with fresh water.

 

[Paul.K]

Nice looking coil there D. Looks just like mine except I'm running 9/10 wraps for 1.4 ohms. Same build for both my kf's.

 

[crss]

If you are looking for a nice medium or mini kit for the kayfun.
kayfun - Gr-Modders
Shipping mid month & instock. Guess i need a medium kit to finish my KLite's. My nano kit from TR, lasts half a day. Hope every one has a great 2014!! So many great choices available for vape gear now. I am just enjoying some Pluid in my Bliss.

 

[Bronze]

Patiently......waiting....for the mail too deliver my Plus and Pro-Vari ring...Anticipation builds.......

Got a genny or three...Tired from chasing the latest and greatest wick only to have it perform no better than the last...Tilting??? Makes me feel like Lemmy...

Bronze...I'm about 30 south of the great Raleighwood...Smack in the middle of the Carolina woods on the mighty Cape Fear River...Heading too Surf City here in a bit....

I'll be checking out the H-Cigar Nemisis here in a few...Pretty sure it's a bottom fire and dang sure I sold my Precise for that reason as well...I've been debating the GG clone from EhPro....SS construction with a floating pin and all contacts are silver plated.....Kinda wishing I'd kept serial #340 GGTS at this point but hey..... they had this new variable voltage thing back then...

Dang mail lady and her holidays.......

Maybe Max Cady will wash up on your lawn.

 

[Bronze]

It's been mentioned in previous threads, just wondering if these designs have actually been ripped off, or licensed for reproduction by the original designers...guess we'll never know.

The Chinese don't seek licenses for anything. They couldn't care less about patent rights or any other proprietary protection. Inventors spend bookoo time and money inventing things and as soon as it hits the market the Chinese are right there breaking it down and reverse engineering it. No guilt, no hangups, no regard, no nothing. Worse yet, we do nothing about it.

 

[El Dee]

Bronze I'll be watching out for Max....

Vapdivrr my Plus should be here any day...I'll be running it on a Pro-Vari and figured it would be a good match from 1.5~2.0...I gotta spool of 28 and 30...I'd read that someone was changing their cotton wick after every tank...This had me mildly concerned but I do realize YMMV...I can likely kill most of a tank in a day...The hemp sounds like more than I can schedule...I got more than plenty of bits and will pick up some cotton balls soon....

Dust that coil looks great...11/12 on a 5/64th @1.6...I could live with that...That'll accept the yarn in its original diameter with none removed....correct????

 

[Dusty_D]

Bronze I'll be watching out for Max....

Vapdivrr my Plus should be here any day...I'll be running it on a Pro-Vari and figured it would be a good match from 1.5~2.0...I gotta spool of 28 and 30...I'd read that someone was changing their cotton wick after every tank...This had me mildly concerned but I do realize YMMV...I can likely kill most of a tank in a day...The hemp sounds like more than I can schedule...I got more than plenty of bits and will pick up some cotton balls soon....

Dust that coil looks great...11/12 on a 5/64th @1.6...I could live with that...That'll accept the yarn in its original diameter with none removed....correct????

That is correct..

 

[Bronze]

Bronze I'll be watching out for Max....

Vapdivrr my Plus should be here any day...I'll be running it on a Pro-Vari and figured it would be a good match from 1.5~2.0...I gotta spool of 28 and 30...I'd read that someone was changing their cotton wick after every tank...This had me mildly concerned but I do realize YMMV...I can likely kill most of a tank in a day...The hemp sounds like more than I can schedule...I got more than plenty of bits and will pick up some cotton balls soon....

Dust that coil looks great...11/12 on a 5/64th @1.6...I could live with that...That'll accept the yarn in its original diameter with none removed....correct????

El, it depends on the juice, but changing the cotton after every tank is not out of the question. There are some juices I vape that wouldn't make it through one tank. On the plus side, it's really not much effort to change out the cotton wick.

 

[El Dee]

Bronze I DIY and always shoot for clean vaping mixes...Hoping the KFL+ will allow me to clean my mixes even farther.....

Dust I like everything about your set up...My buddy was wrapping on a 16 gauge and removing one or more threads....I'd prefer your set up...It would be easier and faster for me to re-wick wherever I may be..

 

[Dusty_D]

Bronze I DIY and always shoot for clean vaping mixes...Hoping the KFL+ will allow me to clean my mixes even farther.....

Dust I like everything about your set up...My buddy was wrapping on a 16 gauge and removing one or more threads....I'd prefer your set up...It would be easier and faster for me to re-wick wherever I may be..

That's been my gameplan, quick and efficient! When you've got a 5 year old vying for your attention, fiddling with coils and wicks is not something you want or can do.

I can take apart, clean and re-wick my KFL in a couple minutes and that is crucial to me..

I build a new coil maybe once a month if needed, or if I'm experimenting with a new setup. That happens only when I have fiddle time. The rest of the time it's quick swap of wick..


Sent from my IdeaTab S6000-F using Tapatalk

 

[Akdare]

If you're having trouble threading the yarn, you can always pull the thread apart into 2 strands, and use a bit of folded Kanthal as a needle to go thru the coil.

Sent from my iPad

 

[qorax]

Thank you Iowagal and JD1. Have a gr8 New Year ahead friends√

 

[PNW Rider]

The Chinese don't seek licenses for anything. They couldn't care less about patent rights or any other proprietary protection. Inventors spend bookoo time and money inventing things and as soon as it hits the market the Chinese are right there breaking it down and reverse engineering it. No guilt, no hangups, no regard, no nothing. Worse yet, we do nothing about it.

i wouldnt say "we" do nothing, New York customs agents love to tear open packages and find a reason, any reason to send you a nasty letter about how you will never see your package.