Bandage rolls and cotton gauze are easier to find, but I don't know of anyone who uses it for wicking. Sterile rolled cotton from CVS or sterile cotton balls are what to get. Avoid the regular cotton balls in the make-up section. Organic cotton balls work, but they have a flavor that takes a little bit to go away and for me the flavor isn't as good as sterile rolled cotton.
- Status
Bandage rolls and cotton gauze are easier to find, but I don't know of anyone who uses it for wicking. Sterile rolled cotton from CVS or sterile cotton balls are what to get. Avoid the regular cotton balls in the make-up section. Organic cotton balls work, but they have a flavor that takes a little bit to go away and for me the flavor isn't as good as sterile rolled cotton.
I know folks had tried sterile gauze before... considering it's cotton and a very loose weave, I suspect that rolled it could never get as tight as yarn or cotton balls if 'over-twisted'. But I don't recall how folks felt about its wicking abilities?
Correct i did not. and the nano kit i bought for this is trash, leaked immediately. gonna wait for the quartz ones to come back in stock
unsure if the issues with the first batch have been fixed (http://www.e-cigarette-forum.com/fo...-used-pyrex-tank-kayfun-yet.html#post12165469)
but the nano quartz from Tarsius are currently in stock here:
Kayfun Kits
still haven't seen SoV's version in stock anywhere.
I use regular cotton balls. Whatever kind my wife buys for makeup and stuff.
OK!! enough. I love my kayfuns & am trying to keep some vape funds for the HERON GP RBA coming up..... I just found a hybrid to nem kayfun kit hitting instore only at Newport Vapor Room | Welcome Saturday 2.15.14
It just is not going to work out..
It just is not going to work out..
I experienced it last summer when walking out of cold, air-conditioned buildings outdoors to humid, 85+ F swelter. It happened last summer in a bad way when I left it in direct sunlight in the car.
It is mentioned in the manual, along with the pressure changes. I seem to recall somebody mentioning this leak when changing altitudes while driving, too.
Kayfun Lite - User Manual (English)
That qorax experiences none of this is way cool. I'm wondering if qorax and Bronze got their indestructo, super-seal KFs from the same batch?
Six of them? Four K'funs and two Russians.
And I've flown with my K'funs for what - 5 or 6 times already!
I'm up to 4 KFL's, 4 Russians and 5 assorted clones.
Hi my name is Slim and I have a problem
Tapatalked from my LG-G2
Hi my name is Slim and I have a problem
Tapatalked from my LG-G2
No you don't... 8 x K'fun/Russians are OK, 'coz they are so good!
Yes you do..... those 'clones'(?) ~ nope, not done!
______________________________
Just kidding!
Q, can you please give me a breakdown of your build on the provari? What gauge wire, what wick config, where the wick came from, what ohms, what voltage?. I want a comparison base..if you don't mind.
Sent from my iPad using Tapatalk.
Sent from my iPad using Tapatalk.
I want to try a vertical coil in my KFL+ from Cloud9, I thought I had bookmarked but can't find anything on it...help please with links or videos....I think I got the coil part but how to properly wick the vertical, I can't remember! Thanks
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
I would recommend checking out rip tripper's kayfun vertical coil build. It works beautifully for me.
Sent from my iPhone using Tapatalk
I've used both the sterile gauze and rolled sterile cotton.
I only tried the gauze with micro coils .059 ID in my reomizer's. As far as wicking goes. It did a good job. But your right about not being able to roll it really tight like I can the rolled cotton.
Hope this helps.
Sent from my iPhone using Tapatalk
Sir, I've nothing specific for the P'vari. My K'funs are built and used on all mods. I mostly use my GP-LUX, the Paps-X and lately the Gus-LORD. Then comes the P'varis and other mods.
All my Attys (see my signature), including my K'funs/Russians are built with Microcoil & Cotton. Some with cotton ball/s and some with the S'n'C cotton yarn.
For wire, I only have (and use) 28g Kanthal. They are wrapped over a toothpick and read between 1.2Ω to 1.4Ω. I've one R-91 on 0.8Ω and it fires perfectly on the P'vari tho I generally use it on my mechs.
~Organic Cotton Ball: Swisspers, from Walmart
~Kanthal: from CanVape
~Lily's S'n'C cotton yarn: Lily® Sugar
I've my GP-Spheroids and one K'fun setup with a "Split-Microcoil" reading at 1.2Ω. Loaded with S'n'C yarn it just blows out the plumes. Here's my pictorial on it: ECF Post #14515: http://www.e-cigarette-forum.com/fo...p-paps-gp-piccolo-more-1452.html#post12013629
My juices are all 80/20 PG/VG, and are:
~Stinky Canuck's Pink Poison, Fantasia and IceBerry Tots
~Sadie's (Evaperated) Halcyon, Incognito and Myst
~VapeMeet's Peral Necklace, Pillow Talk and Mango-Lichee (can never pronounce it's name, nor can it's spelling)
~ECV's RY4D (Double version only) and Grape Jolly
~MLV's Virginia Menthol Tobacco (Ian doesn't make in any more, so have found a similar in Yaeliq)
~Yaeliq's Black Honey Tobacco, Turkish Tobacco, Tiramisu and Israel Coffee
Note: I have the Grant's Vanilla Custard too, but till now find it nothing special (not my ADV).
I hope that was as much detailed as possible.
- Status
Similar threads
