Kayfun LITE

[sunnata]

Yes, i read the negative revues RE glass fit, broken when forced. So the first thing i did was lube the orings & put the end caps on the glass. It was perfect fit, smooth. Then installed on my R91, i just pushed fluid into tank from the bottle. Little messy, pushed juice past the upper o-ring. Vaped the 1st tank, then last night tried to refill tank with a syringe, the glass is 50% over the fill hole. So its not very friendly to refill. But since its a test menthol fluid, i do not care. So far I really like the glass tank. Let me know how the replacement tank works out.

I think the issue might be with one of the rings in my kit. One ring worked perfectly, both sides of the glass, smooth fit, no issues. The other ring simply wouldn't fit. I had a lot of juice on the inner walls and on the orings. Still no bueno.

I'll be sure to post the results with the ibt glass. cheers

 

[LReyes66]

Did you try beveling the edge of the airhole? Totally fixed my whistling issues.

Rather not temper with it physically. My clones on the other hand I don't give a crap about lol.

Sent from my Nexus 5 using Tapatalk

 

[Jerms]

Quick question: so I'm one of those idiots who will just vape on and on and on until I start vaping burnt cotton if I can't monitor the juice level. How are you folks who are using the metal mid sections keeping track of the juice level? At this point I have 8 of them just sitting around looking pretty, and I do love the look of a full metal KFL or R91.


Sent from my iPhone using Tapatalk

I just keep going until I get a dry hit. Other tanks a dry hit usually means the wicking isn't keeping up, but with my KFL a dry hit means the tank is bone dry. I notice the drier hit before the cotton actually burns.

If your burning your cotton or just want to check the level of juice, you can remove the top to check how much is left. Just make sure your finger is over the airhole when removing, and when putting it back on you want to just catch the threads, then flip it over to screw back down.

 

[TheKiwi]

Speaking of clones, ebay's black edition clone is honestly quite unbelievably good. I just got mine today and I was so impressed.


Sent from my iPhone using Tapatalk

 

[TruSound]

I don't think it is, but please confirm this is NOT the chimney that comes with the V2 KFL...

looks great crss, thanks for the pics. I got some ibtanked glass on the way so I can try to bring mine back to life.

speaking of waiting for SoV to finish up, have you seen the new design for the long chimney?

hope it won't take much longer

 

[crss]

Quick question: so I'm one of those idiots who will just vape on and on and on until I start vaping burnt cotton if I can't monitor the juice level. How are you folks who are using the metal mid sections keeping track of the juice level? At this point I have 8 of them just sitting around looking pretty, and I do love the look of a full metal KFL or R91.

Well, i started with a needle tipped bottle. Slid the needle into the tank (at an angle towards tank) it will catch the tank seem. Closest seem to the base. Squeeze bottle, till i could see fluid near the fill hole, or no air bubbles enter bottle after done squeezing.

 

[crss]

Tru, it is not an original part. It is found here https://www.facebook.com/scienceofvaping

 

[LReyes66]

I don't think it is, but please confirm this is NOT the chimney that comes with the V2 KFL...

Nope

Sent from my Nexus 5 using Tapatalk

 

[crss]

ohman does custom drip tips & also will customize your kayfun caps. found here http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/436537-introducing-bmods-custom-drip-tips-more-65.html

 

[LReyes66]

Speaking of clones, ebay's black edition clone is honestly quite unbelievably good. I just got mine today and I was so impressed.


Sent from my iPhone using Tapatalk

Its alright. I mean it's probably the best clone out there but I hate how much tighter the draw/airholr is compared to authentic kfl+ or R91

Sent from my Nexus 5 using Tapatalk

 

[TruSound]

Thanks brother, didn't think it was but got nervous for a second, I'll be using a different top cap and don't need any surprises.

Tru, it is not an original part. It is found here https://www.facebook.com/scienceofvaping

 

[TheKiwi]

Its alright. I mean it's probably the best clone out there but I hate how much tighter the draw/airholr is compared to authentic kfl+ or R91

Sent from my Nexus 5 using Tapatalk

Aaaaand the clone's inconsistency rears it's ugly head again. Grin. My airhole is perfect, and I prefer looser draws


Sent from my iPhone using Tapatalk

 

[LReyes66]

I prefer looser draws as well but that's what put the black edition off for me. Just gave it to my lady and bought another kfl+ lol

Sent from my Nexus 5 using Tapatalk

 

[LReyes66]

Anyone have success drilling out the airhole with just a hand drill and no table clamp?? I don't have access to a drill press....forever alone.

Sent from my Nexus 5 using Tapatalk

 

[crss]

Anyone have success drilling out the airhole with just a hand drill and no table clamp?? I don't have access to a drill press....forever alone.

Sent from my Nexus 5 using Tapatalk

Dont even think about it. I tried for a few hours every day, for 3 days straight. No you will hurt your self, or the deck and brake lots of drill bits. 1 minute on a drill press, simple. I wont drill anything on my original kayfuns. But i have drilled out 2 kayfun clones and 1 squape.

 

[LReyes66]

OK well good thing I found a friend that will do it for me.

What drill bit would be the biggest allowed? Its the black edition clone I am gonna drill n the hole is close to the top. I was gonna do 1/16 but was debating if a 5/64 size would work as well.

Sent from my Nexus 5 using Tapatalk

 

[crss]

I like in the OC, free drill press here. If you want a 23mm m-tank i also have a few free ones. PM me if interested. I have OCD, if its not 22mm all the way, it bugs me & i cant use it.

 

[Flt Simulation]

LReyes66 ... Not on topic, but that little dog in your avatar has got to be the sweetest photo of a dog that I have seen in a very long time!

What a face!

 

[Moodyfisherman]

Group photo of the Kayfun family reunion

I can't decide if I ever get this assembly of toys together if I am considered over the edge, or just a happy vaper?....

 

[TheKiwi]

My god.... There's enough value in there to buy a solid used car........


Sent from my iPhone using Tapatalk