So jealous. I was camping out for it and didn't get it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Status
woooooot, i won a SOV proto cap for kayfun$@!$#@^$#&$&^%^
I never win anything, now to wait a few weeks to see. I hope it arrives with the glass kit.
Me too!!! So excited!!!
Hi guys, I have an EHPRO KFL+ that came with transparent frosted M-tanks but I was told that many of my favorite juices would crack it ie. Modder's Choice Beast Mode. How do you know if a juice is a tank cracker? Is there another M-tank out there that doesn't crack?
unless you have a glass tank, some juice eats plastic & orings. There is no "safe" clear plastic tanks for the kayfuns. I have "Grenada" in my klite since July, there is no clear window & changed (4c) oring. I destroyed a few Terminator-C tanks, prior to getting kayfuns. Not a fun time.
Do any of you folks know if a pyrex glass center section is going to be made available anytime soon for the Kayfun Lite?
That would be a glass center section the same size as the standard clear plastic one they all come with now.
Ron,
That would be a glass center section the same size as the standard clear plastic one they all come with now.
Ron,
Nope, cant put those fine threads on glass. There is a glass tank conversion kit out there.
I recently got a KFL v2 from intaste.de and noticed that the clear tank section was very thin and cheap looking.
If you look closer, you can see a seam right in the middle of the plastic. There is a corresponding seam on
the other side, indicating that the plastic tube was molded in two pieces and glued together. In contrast, the replacement
M tank section I bought on eBay was thicker and in one piece. Anyone else get a similar clear tank in their v2 KFL?
If you look closer, you can see a seam right in the middle of the plastic. There is a corresponding seam on
the other side, indicating that the plastic tube was molded in two pieces and glued together. In contrast, the replacement
M tank section I bought on eBay was thicker and in one piece. Anyone else get a similar clear tank in their v2 KFL?
I recently got a KFL v2 from intaste.de and noticed that the clear tank section was very thin and cheap looking.
If you look closer, you can see a seam right in the middle of the plastic. There is a corresponding seam on
the other side, indicating that the plastic tube was molded in two pieces and glued together. In contrast, the replacement
M tank section I bought on eBay was thicker and in one piece. Anyone else get a similar clear tank in their v2 KFL?
Those are injection mold seams...it was molded in one piece, and that is where the mold separates to remove the tanks. Both of mine have it, it's not a defect...they are made of polycarbonate. Not sure about the ones on eBay, they could be polyvinylchloride, extruded and threaded; thicker because of the process used, but not necessarily sturdier.
I find these deeper juice fill holes annoying on both my v2 kfl+ and black edition clone. You cant use a dripper/dropper to fill it up or it will leak out. I had to transfer most of my juices in glass bottles into plastic ones and attach a needle nose too it.
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
Oh yeah my kayfun lite+ middle section mtank that came with it had parts of plastic sticking out from the inside. I had to file them down but thought it was weird for a svoemesto to have that kind of issues on their mtank products
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
I've been using it but I hate not being able to see the juice level of my device.
I've also been topfilling because I don't like having to unscrew the bottom fill hole and I think I finally got it down but I had a (maybe dumb) question. If my device still has juice in it and I want to add more, when I take off the top cap, do I need to have my finger over the airhole as well? I know when you topfill an empty Kayfun, your finger is on the airflow hole the entire time. Also, I haven't been filling it to the brim like this but is it feasible to do so without leakage or flooding?
Yeah you'll needa have the finger on. And no you shouldn't fill it to the top. You'll need a healthy amount of "empty space" to maintain decent negative pressure within the tank.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Thanks! I've also noticed that sometimes the bottom fillhole doesn't accept any liquid, the liquid will just sit on the outer area without sinking into the bottom. Is this a common issue?
Naw I'm using the pipet or dripper tip from my bottles which usually worked before but lately the liquid just won't flow into the tank. Before I would just drip it in or put it in the fillhole and unload but it won't go in anymore for some reason.
I want to use a syringe but I can't seem to find a needle nose syringe anywhere in San Diego (been to CVS, Walmart, and Target already). Where do people usually find these for cheap?
Last edited:
I have no idea why they arent releasing the next kayfun with a threaded chimney so that they can use a cylindrical glass tank (remove the need for threading on the tank)
Wow vape rev still has the kayfun in stock and lasted all weekend. I super regret getting it at my local shop now 
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
- Status
Similar threads
