Kayfun LITE

[bsoplinger]

My coil placement with the Black edition v2 is much higher than anyone else seems to use but it was the only way I could get decent flavor. Pic further back in the thread, between 3 & 4mm high.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[ronpaek100]

The spring tension has already decreased. I'm lucky to have mods with adjustable center posts. I've had to raise it twice now and my ohms are jumping all over the place.

I also don't like the drip tip adapter for the Russian 91% as well as the o-ring doesn't fit as well as the KFL+ in the top piece where the chimney connects

 

[horton]

It's a shame reading the comments about the 91% V2. Wonder why Kebo made it so the pin could not be user serviced?

 

[sedge]

I took it apart and put it back together. Still to no avail. I have contacted kidney puncher. Let's see what they will do. I did find Russian spare parts but they are in Canada it would cost me $30 to change it over back to version 1.

 

[sedge]

It doesn't work on my provari. It doesn't work on my semovar. It only works on my marks bug wizard evolved because I can back the center pin out so far that it finally makes contact

 

[TheKiwi]

If you're talking about the russian v2, kebo just posted on their Facebook that they will provide a replacement centre post. You just need to contact whoever you got it from


Burping out loud using Tapatalk

 

[sedge]

If you're talking about the russian v2, kebo just posted on their Facebook that they will provide a replacement centre post. You just need to contact whoever you got it from


Burping out loud using Tapatalk

I saw that. I went to their page to express my concern and noticed their announcement. Nice to see they are on top of it.

 

[LReyes66]

wait what? I thought it was the v3 that had the spring 510 pin. I thought I had the v2 when i ordered in January and what differentiated the v1 to the v2 was the polished chimney.

 

[sedge]

wait what? I thought it was the v3 that had the spring 510 pin. I thought I had the v2 when i ordered in January and what differentiated the v1 to the v2 was the polished chimney.

The polished was a limited edition of the v1 that vaperdna had. I got that one too. No spring pin. The v2 has the spring pin and is slated to be available in polished, gold, and now available for pre order, black.

 

[dwcraig1]

I am able to use tank cracker juice and still see how much is still in there.
https://scontent-a-lax.xx.fbcdn.net/hphotos-frc3/t1.0-9/1513171_771512862872940_1381366347_n.jpg

 

[dwcraig1]

I am able to use tank cracker juice and still see how much is still in there.

 

[horton]

To make sure I understand who is selling what now.... There is a real V2 Russian 91% made by Kebo. There are black and gold 91%'s being sold by clone makers. You can pre-order the V2 black and gold from Kebo. Is that correct? Seems odd that the clone makers are out with the black and gold before Kebo has them on the shelf...lol

The glass section really looks nice and must not leak a bit to be able to lay it on the lappie. Neat!!

 

[crss]

I am able to use tank cracker juice and still see how much is still in there.

dwcraig1, what glass kit is this on your lite?? Looks very nice n juice friendly. Can you use the bottom fill hole?

 

[TheKiwi]

wait what? I thought it was the v3 that had the spring 510 pin. I thought I had the v2 when i ordered in January and what differentiated the v1 to the v2 was the polished chimney.

Officially, there is only the v2 and the v1. The v1 does not have spring-loaded 510 connection while the v2 does.

Mid way through the v1's production cycle, there was an upgrade in the stainless steel used: from 304 to 316. While most vendors continued to simply sell them as the v1 (since there really isn't any real upgrade), there are others who basically did what I would consider a marketing ploy, and called it the v2. Vapedna is one of those vendors.

But according to kebo, there's really only the v1 and v2


Burping out loud using Tapatalk

 

[finagle69]

I'm liking the nano polycarbonate tank. I don't have a short chimney but luckily have a few drip tips with a wide enough hole to allow the stock chimney to go thru. Ordered a couple Orion top caps as well.

Sent from my HTC One using Tapatalk

 

[LReyes66]

The polished was a limited edition of the v1 that vaperdna had. I got that one too. No spring pin. The v2 has the spring pin and is slated to be available in polished, gold, and now available for pre order, black.

I was talking about the chimney pieces. The original R91 had a matte/brushed stainless steel chimney and the newer version had the polished chimenys. But inotfat cleared it up for me.

 

[Firestorm]

Officially, there is only the v2 and the v1. The v1 does not have spring-loaded 510 connection while the v2 does.

Mid way through the v1's production cycle, there was an upgrade in the stainless steel used: from 304 to 316. While most vendors continued to simply sell them as the v1 (since there really isn't any real upgrade), there are others who basically did what I would consider a marketing ploy, and called it the v2. Vapedna is one of those vendors.

But according to kebo, there's really only the v1 and v2

I have all three versions.

 

[LReyes66]

Sold my Russian and plan on picking up another KFL+ V2 on intaste.

 

[roflwaffles]

Ordered a quartz nano kit and a quartz standard kit. I should be able to use menthol flavors on these just fine yes?

 

[crss]

Ordered a quartz nano kit and a quartz standard kit. I should be able to use menthol flavors on these just fine yes?

Oh yes.. you sure can. What kit did you order? I have Pluid in sov glass kit on my kayfun lite. Grenada in Tarsius glass kit on R91.
Not all glass kits are the same. I can only use the bottom fill port with the SOV kit.