Killer 705 atty

[GB023]

I took a chunk out of my Terminator's stock CE2 ceramic trying to get it off the pin. I had to sand down the sides of the pin to more easily put on replacement ceramics (I read of someone else who did too). The material and machining is no where close to the quality of the Killer's. It wobbles a lot in my OCD tanks. I'm going to try to sand or cut off about 8mm from the tube - it's way too big. Otherwise, I think that it vapes great, it feeds well, and I couldn't tell it apart from my Killer if I was blindfolded or in the dark.

I used a dremel and a cut off wheel to shorten my killers. I was going for 6mm, but by the time I filed and squared the tube it was 7mm, it turned out to be perfect, luck of the feeble minded I guess.
I've broke the ceramic in my Diver a couple of times, trying to get it out. I finely found out, if i use a small screw driver and carefully pry the pin out from the bottom, i save the ceramic. Maybe this could work for the Terminator as well....

 

[Firestorm]

Dremel... Now I know what to tell the family to get me for Father's Day!

 

[Firestorm]

I use my Killer with the long bell and I think it fits perfectly in my XL OCD tanks. The regular bell is too long in my standard OCD tanks, but I would never consider cutting it. Instead I'm going to order a custom 22mm tube, probably 7mm longer than the standard length.

 

[GB023]

I use my Killer with the long bell and I think it fits perfectly in my XL OCD tanks. The regular bell is too long in my standard OCD tanks, but I would never consider cutting it. Instead I'm going to order a custom 22mm tube, probably 7mm longer than the standard length.

I do understand not wanting to mod your Killer, I"m guessing that would be the general consensus. My problem is, I don't like the looks of longer tanks. I know this sounds weird, but I'd like mine shorter.

 

[Firestorm]

Let me know how yours works out - maybe if I get a dremel and I do a decent job shortening the Terminator, I'll consider taking the knife to my Killer. My Killer's bell isn't as cheap to replace as my Terminator's if I screw it up.

 

[AnsonJames]

I've got an Ebaron dripper pro and was considering buying a Killer (still am) got a couple of Terminator tanks in the mean while - use them in AGR's. They perform flawlessly with a little modification.

Anyone with both that can give me a reason for spending $75 on the Killer?

 

[chadsmo]

I use my Killer with the long bell and I think it fits perfectly in my XL OCD tanks. The regular bell is too long in my standard OCD tanks, but I would never consider cutting it. Instead I'm going to order a custom 22mm tube, probably 7mm longer than the standard length.

If you want an OCD tank that is exactly the right size for your Killer so both ends are more or less flush without an extension tip get a tube cut that is 35.8mm long.

 

[GB023]

If you want an OCD tank that is exactly the right size for your Killer so both ends are more or less flush without an extension tip get a tube cut that is 35.8mm long.

The IBT's are great tanks and now with the SS caps, make them visually very versatile...the custom tube is a great option also. Like I said earlier, I like the looks of short tanks on my mods, so I mod my killers to fit them, now on my IBT I can use any drip tip. For me this is way cool.
The problem I have with these tanks is: The thin caps leave a lot of room and juice below the juice control. When at home this is no problem, but when out and about it can be. Maybe these are just problems for me, because I like stealth tanks. I guess I could carry a long drip tip and pull the tank up and vape on, might look a little weird, but would work. Ain't it great we have these choices !

 

[Firestorm]

I vape my tanks dry by pushing the tank up on the atomizer so the juice hole is at the bottom of the tank and I tilt my PV when I vape or dry hit to drain the tank so juice flows into the hole. I would leave a little room if cutting the Killer or getting a custom tube so I can still do this.

 

[RSAnthony]

I have this tank also, not a fan. tough to pull the ends off, personally not a fan of the fill hole bc of two reasons 1. it blocks my external drip tip 2. i tried using it to fill and it doesn't have much open space to allow air to release so it forced juice down the k705 and even out of the same filling hole... it was a mess.

just my 2 cents on this tank.

Guys did anybody try to fit the Killa into the X8 tank?
$7.47 Authentic X8 2.5ml Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

Thanks a lot in advance.

 

[FogHawg]

Guys did anybody try to fit the Killa into the X8 tank?
$7.47 Authentic X8 2.5ml Electronic Cigarette Atomizer at FastTech - Worldwide Free Shipping

Are these the tanks w/the killer clone inside?

 

[Dnerve]

Are these the tanks w/the killer clone inside?

No, seems to be a standard carto (punched?). But I bet you'll find your joy elsewhere, there are numerous threads for the Killer's clones or the Diver.

 

[FogHawg]

Thanks Dnerve. Yep, but I just ordered a couple of these tanks & thought if it came w/the clone atty - what a nice bonus!! Oh well.

 

[Vapor2112]

Sorry for the delayed response, pretty sure the top fill port is automatically assumed when you choose the "killer" set-up.

Is the full port on the top cap one of the options to choose from, I only see the one with a fill port in the tube. Thanks.

 

[Chikenbok]

Anyone know why my killer tank from vaperfexion order on the 5th is still awaiting fulfillment?! Going nuts here in this silly old homemade crap tank!

 

[Vapor2112]

Pretty sure they're being built as ordered. Mine too just inside of a week to ship if I recall. It'll be worth it when it comes.

Anyone know why my killer tank from vaperfexion order on the 5th is still awaiting fulfillment?! Going nuts here in this silly old homemade crap tank!

 

[Firestorm]

...maybe if I get a dremel and I do a decent job shortening the Terminator, I'll consider taking the knife to my Killer.

I bought a dremel last night (happy Father's Day to me) and took 7mm off my Terminator tonight and sanded it smooth. It looks a lot better in my XL OCD tank and vapes just fine. I guess I'll do my Killer's regular bell next so I can fit it better in a standard OCD tank. Thanks again golfbum023 for the inspiration.

 

[StereoDreamer]

I haven't had it long enough to praise it. All I know for sure is it's easier to open the juice control and the ceramic cup was easy to remove and replace where the Killer ceramic is very hard, at least mine is. For $10 I'm will to give it a try.

And if you already have nice carto tanks, Vaping Craze is selling the Terminators in 5-packs for about $17 (but you have to buy the 510 extension pieces seperately, but they are under $2 each. So for about $5 each, you can get 5 of them, and not have to deal with those cheapo plastic DCT tanks that SmokTech ships with the complete Terminator TT Tank kit...

5pc Box Smoktech Terminator Tank Replacement Atomizers

 

[Altered Image]

Sorry for the delayed response, pretty sure the top fill port is automatically assumed when you choose the "killer" set-up.

Thanks for letting me know, no worries about the delay...we all have that thing called life we have to take care of...lol. Should be ordering me one soon......

Just to ask, do you think that PETG tank will hold up to Pluid?

 

[StereoDreamer]

I bought a dremel last night (happy Father's Day to me) and took 7mm off my Terminator tonight and sanded it smooth. It looks a lot better in my XL OCD tank and vapes just fine. I guess I'll do my Killer's regular bell next so I can fit it better in a standard OCD tank. Thanks again golfbum023 for the inspiration.

I'm considering doing this to one of my Terminators for using it in my AMP tank, and some of my XL-length IBTanks.

But it's actually GOOD that they are a little on the long side, because I use some of mine in X8 tanks, which have that little filler port screw on top, and a flush carto wouldn't let you any style of drip top that has any sort of wide base...