- Status
Congratulations DevilFish!
And I've found the same thing, Kate and Ned, about the USB cord/battery. Not sure why this is, but I can't even make the automatic switch work well enough to produce sufficient vapor. So I use the manual switch all of the time for the USB cable and car charger. I hold it down two or more seconds, then start drawing. Sometimes, even that time is not long enough. Four seconds, then draw, is about right.
And I've found the same thing, Kate and Ned, about the USB cord/battery. Not sure why this is, but I can't even make the automatic switch work well enough to produce sufficient vapor. So I use the manual switch all of the time for the USB cable and car charger. I hold it down two or more seconds, then start drawing. Sometimes, even that time is not long enough. Four seconds, then draw, is about right.
Hip hip Hooray for Singapore
thanks ludoby the way I found two minor flaw but this is really minor..
auto swtich the janty words is printed upside down.
and other is I noticed there is a minor cut on the wire connected to the battery compartment of the USB
but all this is minor to me IMPORTANT , is all work well.
thanks ludo , really kissbox is really different from those geneic out there
is kinda weird the feeling , as I tested before , 901 , 801 , 103 all genenic out there , kissbox do have their own special feeling .
Any problem Devilfish, just send me a mail and I'll take care of it
thanks , overall the two flaws is too minor for me, I not a perfectism here sorry I don;t know how to spell it...
important for me is all parts can work is good enough for me
it seem okie for me I just tried the auto switch on the usb
I press and draw in the same time , than I let go the switch and inhale and blow out .
I apply the slow drag draw .????
by the way I heard one users USB been burn out is it , cannot be connect to pc for long time?
let said ur pc on for one day and in the same time u also connect the janty usb to the pc .
will it get burn due to this???
Last edited:
I leave mine connected, and I haven't had any problem. Well, my PC DID catch fire, but that was a bad PCI card.
I leave mine connected, and I haven't had any problem. Well, my PC DID catch fire, but that was a bad PCI card.
roger that leaford
I'm a newer eSmoker. Started on 9/8. My first was a super mini from ePuffer with som mint liquid. I was struggling for the first few days, but now it works nicely for me. I'm just using it lightly now since they're in Canada and I don't have any replacement parts.
I now have 2 DSE901s from puresmoker. I was loving them until this morning. It's not the eCigarette...from what I'm reading now, it's what I put in the carts. I excitedly received my sampler pack from JC yesterday. I ordered a bunch of empty carts from Steve so that when it arrived, I could fill them up with the new juice. At first I thought that I hadn't put enough liquid on the cart, since I had never started with a dry, empty one before. After dragging, and adding, and dragging and adding...I've realized that it's not going to change. There is very little flavor, and it tastes burned, which I have never experienced thus far. I've thoroughly read the "warning" post about JC and understand that as of 9/22, his formula is changing again. I wish that I would have waited until then to order. Oh well. Luckily I did order 2 spare atomizers from Steve, but I wasn't expecting to have to replace them so soon.
I've read about different ways to try to save the atomizer. When you're talking about boiling them, do you mean to literally put the whole section with the atomizer in it into a pot of boiling water? I can't imagine that that would be good for it. Any help would be appreciated. I do blow it out every evening with a good, hard, steady breath. That does get a lot of stuff out.
Janty is in China, right? How long does it take for shipping to the US? (Texas!) It looks as though they are out of stock of all of their liquid. That's kind of what I'm looking for, since JC seems to be wrecking my investment! I haven't had any issues from the liquid that I got from puresmoker, but I wish that they had some more flavors.
I now have 2 DSE901s from puresmoker. I was loving them until this morning.
It's not the eCigarette...from what I'm reading now, it's what I put in the carts. I excitedly received my sampler pack from JC yesterday. I ordered a bunch of empty carts from Steve so that when it arrived, I could fill them up with the new juice. At first I thought that I hadn't put enough liquid on the cart, since I had never started with a dry, empty one before. After dragging, and adding, and dragging and adding...I've realized that it's not going to change. There is very little flavor, and it tastes burned, which I have never experienced thus far. I've thoroughly read the "warning" post about JC and understand that as of 9/22, his formula is changing again. I wish that I would have waited until then to order. Oh well. Luckily I did order 2 spare atomizers from Steve, but I wasn't expecting to have to replace them so soon. I've read about different ways to try to save the atomizer. When you're talking about boiling them, do you mean to literally put the whole section with the atomizer in it into a pot of boiling water? I can't imagine that that would be good for it. Any help would be appreciated. I do blow it out every evening with a good, hard, steady breath. That does get a lot of stuff out.
Janty is in China, right? How long does it take for shipping to the US? (Texas!) It looks as though they are out of stock of all of their liquid. That's kind of what I'm looking for, since JC seems to be wrecking my investment! I haven't had any issues from the liquid that I got from puresmoker, but I wish that they had some more flavors.
Sorry to hear about your trouble, Cara. The good side is that Christian does honor his guarantee, and I'm sure he will refund your money or allow you to exchange for the new stuff.
As to Janty, they actually ship from here in the US. Just order from www.jantyusa.com.
As to Janty, they actually ship from here in the US. Just order from www.jantyusa.com.
gee I feel why the package include one auto and one manual switchafter testing I feel most of the janty users prefer using manual switch
is easy to draw , lots of vapour and got the kick.
whereas on auto , u have to draw hard and slow in order to get the kick.
Welcome to the forum Cara. Sorry you've been having trouble with your atomisers and juice.
"When you're talking about boiling them, do you mean to literally put the whole section with the atomizer in it into a pot of boiling water?" Yes, submerge the whole thing - the atomiser - make sure you take the battery off first
There are a couple of threads about cleaning atomisers here - http://www.e-cigarette-forum.com/forum/tips-tricks/2175-cleaning-atomizer.html
http://www.e-cigarette-forum.com/forum/tips-tricks/1100-how-clean-atomizer.html
I'm glad your Kissbox has arrived Fish. Do you like it? I think the manual switch is a real bonus too.
TBob and Ned, Ludo said that the wire on the USB cable is not big enough - for safety reasons - to carry the same amount of power as the batteries to the atomiser. He's looking into whether there is a way to change this. We'll have to wait and see if there is anything that can be done. I'm not finding it too annoying but it is hard to remember sometimes which drawing technique I should be using to compensate for differing power levels.
"When you're talking about boiling them, do you mean to literally put the whole section with the atomizer in it into a pot of boiling water?" Yes, submerge the whole thing - the atomiser - make sure you take the battery off first
There are a couple of threads about cleaning atomisers here - http://www.e-cigarette-forum.com/forum/tips-tricks/2175-cleaning-atomizer.html
http://www.e-cigarette-forum.com/forum/tips-tricks/1100-how-clean-atomizer.html
I'm glad your Kissbox has arrived Fish. Do you like it? I think the manual switch is a real bonus too.
TBob and Ned, Ludo said that the wire on the USB cable is not big enough - for safety reasons - to carry the same amount of power as the batteries to the atomiser. He's looking into whether there is a way to change this. We'll have to wait and see if there is anything that can be done. I'm not finding it too annoying but it is hard to remember sometimes which drawing technique I should be using to compensate for differing power levels.
Hi Cara, Fellow Texan here.
The Janty order I placed actually shipped out of Fort Worth, Texas.
(I should just drive over there and pick stuff up!)
And yes, just boil them suckers! I boiled a generic, and Njoy, and my Janty just last night and all 3 now work like when I first received them. You could also use steam to clean them, but I don't OWN one of those fancy-shmansy steamy things....YET, and I got thrown out of 24 hour fitness when I tried to clean them in the womens sauna (Stupid restraining order!)
Hope all goes well for you!
The Janty order I placed actually shipped out of Fort Worth, Texas.
(I should just drive over there and pick stuff up!)
And yes, just boil them suckers! I boiled a generic, and Njoy, and my Janty just last night and all 3 now work like when I first received them. You could also use steam to clean them, but I don't OWN one of those fancy-shmansy steamy things....YET, and I got thrown out of 24 hour fitness when I tried to clean them in the womens sauna (Stupid restraining order!)
Hope all goes well for you!
Thanks leaford, Kate and Tex! Maybe since I caught the problem early (by coming to the forum help and reading all of the posts about the issues) I'll be able to save my atomizers. I'll try the boiling thing and read the link that Kate mentioned. Thanks yall for your help!
Hi
I'm new to this forum(so sorry if this has been answered before), and just received my Yentl in the post a few days back. Charged it up as soon as I got it. One problem I have found so far, I seem to get palpitations even after a few puffs. Does this tend to go away, or am I doing something wrong? From reading on here it seems that I might be overdosing on nicotine. I'm still smoking regular cigs too. Do I need to knock them on the head? Only really wanted to use it as substitute when I'm out and about.
I'm new to this forum(so sorry if this has been answered before), and just received my Yentl in the post a few days back. Charged it up as soon as I got it. One problem I have found so far, I seem to get palpitations even after a few puffs. Does this tend to go away, or am I doing something wrong? From reading on here it seems that I might be overdosing on nicotine. I'm still smoking regular cigs too. Do I need to knock them on the head? Only really wanted to use it as substitute when I'm out and about.
Hi Ealingboi, welcome to the forum.
You might want to cut down on the nicotine, it is administered and absorbed differently with esmoking so we don't really know how much gets into our bloodstream. Palpitations are one of the signs of overdose so take it easy and if you have any low or zero nicotine cartridges or juice then have a go with that.
It could also be that you are sensitive to some other ingredient in the vapour, you might need to try a glycerine based eliquid if cutting down on the nic doesn't work.
Check out the health board if you need to and if you still have problems post there, someone will have suggestions.
You might want to cut down on the nicotine, it is administered and absorbed differently with esmoking so we don't really know how much gets into our bloodstream. Palpitations are one of the signs of overdose so take it easy and if you have any low or zero nicotine cartridges or juice then have a go with that.
It could also be that you are sensitive to some other ingredient in the vapour, you might need to try a glycerine based eliquid if cutting down on the nic doesn't work.
Check out the health board if you need to and if you still have problems post there, someone will have suggestions.
Thanks for your advice Kate.
I'm quite a heavy smoker 30/40 a day so was think the high carts would sort me out.
Always thought I could alternate between the two(so I could cut down), but looks like I might need to choose one or the other.
I'm quite a heavy smoker 30/40 a day so was think the high carts would sort me out.
Always thought I could alternate between the two(so I could cut down), but looks like I might need to choose one or the other.
Welcome to the forum Cara. Sorry you've been having trouble with your atomisers and juice.
"When you're talking about boiling them, do you mean to literally put the whole section with the atomizer in it into a pot of boiling water?" Yes, submerge the whole thing - the atomiser - make sure you take the battery off first
There are a couple of threads about cleaning atomisers here - http://www.e-cigarette-forum.com/forum/tips-tricks/2175-cleaning-atomizer.html
http://www.e-cigarette-forum.com/forum/tips-tricks/1100-how-clean-atomizer.html
I'm glad your Kissbox has arrived Fish. Do you like it? I think the manual switch is a real bonus too.
TBob and Ned, Ludo said that the wire on the USB cable is not big enough - for safety reasons - to carry the same amount of power as the batteries to the atomiser. He's looking into whether there is a way to change this. We'll have to wait and see if there is anything that can be done. I'm not finding it too annoying but it is hard to remember sometimes which drawing technique I should be using to compensate for differing power levels.
just wonder how long the battery can hold for how many hrs?if overnite charged
when u left it connected to the switch with the atomiser.after u e smoke.
when u disconnect from the switch with the atomiser and put back to the case every time u e smoke finish.
- Status
Similar threads
