Hey oRachael, is Apollo only offering the stainless in kits now? I was going to order backups, but the kit price is rough when you don't need the goodies.
K... going in backward order. lol
Tlmoody... WAY too long, I'd say. Guessing cap wouldn't screw on. I've not tried those, but most IMR batts won't fit in 2200 mah, let alone ICR. Only safe bet for a batt over 2000 mah is the panny hybrid IMR i linked to in post on page 11. Otherwise, if you don't get those panny 18650s, your best bet is AW brand IMR. Imr batts tend to be way shorter than ICR batteries, and honestly, you're not going to get great performance out of those ones, because they aren't designed for a 'high drain' type device like the LT. So moral of the story is Panny 18650 IMR hybrid in 2200 mah, or AW brand IMR 18650s are your two best batt choices right now. Oh, and if you're trying to 'combine' orders to save shipping (which i always try to do) the orbtronic site has free shipping, and the good panny 18650s for $7.99 each, cheaper if you buy 2 or more. Here's link for those... And ooh, hey, they're $2 cheaper each, and also 2200mah (and 2200 mah in the panny will last WAY longer than a 2200mah ICR in the lavatube) so its a good deal all the way around. lol
CGR18650CH Panasonic 18650 Li-Mn-Li-ion CGR18650CH High Drain 10A Rechargeable IMR Hybrid Battery Cell
Yeah, Tell me about it. I remember when I unpacked the eGo and thought "this thing is huge"...lol My wife looked at me like I was nuts with that thing sticking outa my mouth.Love the weight of the SS!!! Epower is like supa light compared...
I noticed something similar with my bolt too. If it bothers you enough you could get a 510/510 adapter and see if just adding that helps out. Or you could do what I did on one of my 510/eGo adapters and cut a small slit into the top threads to allow a little more air. Either way, your not modding your device, rather a cheap adapter.I have another lava tube question. My lava tube has a somewhat tighter draw (even with the carto out as far as is manageable) than does my ProVari. This isn't really problem when i have a carto on it that has a very light draw but with a regular carto its not perfect and with a carto that is kinda tight but still okay with the provari, it is to restricted for the LT. Is there a way to loosen this up? is it just because the threads on the 510 connection are a little tighter?
I noticed something similar with my bolt too. If it bothers you enough you could get a 510/510 adapter and see if just adding that helps out. Or you could do what I did on one of my 510/eGo adapters and cut a small slit into the top threads to allow a little more air. Either way, your not modding your device, rather a cheap adapter.