let's talk inside GG thread cleaning
- Thread starter emonty
- Start date
- th_trl_thread_readers 0
- Status
I've been wondering abt GG maintenance besides applying noalox and such, like polishing using jewelry polishing cloth and perhaps the thing you posted above for the inside, what worries me is that these sorts of cleaning method may affect the performance of GGTS itself. Any idea on this?
Ok,
just a minor tip for cleaning the inside threads:
The outside is nice, but the inside is vital for performance!
used for guns and it actually cleans your threads on the inside like new again.
Example:
does it has metal hairs Emonty? If yes then its not good for threads. But if its hard plastic then its the best
keeping the threads clean will enhance and/or sustain it's performance!
does it has metal hairs Emonty? If yes then its not good for threads. But if its hard plastic then its the best
I put the picture there as an example, yes they have them with hard plastic or nylon hairs, I agree that will be the best.
An easy way I have found is to remove the button and end caps and "thread" a towel through the GG body. You want it bunched up pretty good so it'll be tight in the tube. That will clean the threads pretty good most of the time.
Emonty, I was using those things to clean baby's feeder. I think that this tool is the best for all GG threads!!
Rob, I use your trick to clean them before I send them to you Sometimes I miss some parts but you finish the job as you told me.!
Rob, I use your trick to clean them before I send them to you
Sometimes I miss some parts but you finish the job as you told me.!
Mine is also black inside of that same spot from fluid I guess, I would like to be able to clean as well...
Guys, sorry I have to ask again. You mean the place where the brass polygonal is?
Yes Imeo. They mean the atomizer cap, specifically the area that collects the E-liquid leaked out of the atomizer.
The only way to really clean that area, is to un-thread the center pole of the cap and then, you will have the cap empty and ready to be easily cleaned up.
This one is "hairy" ;-)
Emonty,
Unless you tell us where you can get these and post a link with full description, the only thing available to me right now is this
Is it Steampunk enough?
Mist can you please stop it because laughs make my back hurting????????????
And I thought MHR meant the area inside the GG cap where the polugonal rests. If MHR meant the area that collects liquid then yes the solution is to unthread the connector
And I thought MHR meant the area inside the GG cap where the polugonal rests. If MHR meant the area that collects liquid then yes the solution is to unthread the connector
Last edited:
Emonty,
Unless you tell us where you can get these and post a link with full description, the only thing available to me right now is this
Is it Steampunk enough?
use google translate:
Krale Schietsport
I soak my atomizer cap in vinegar then rinse with water. This removes all the gunk. In between soakings I flatten a Q-Tip, wet it and run it along the inside edges. Keeps everything nice and clean.
Emonty, those gun barrel brushes work great and come in a variety of sizes. I use one with a cloth over it to clean the insides of my GGTS and my GG Slim.
Good enough for my Desert Eagle, good enough for my GG's. Both are marvelous feats of engineering.
Emonty, those gun barrel brushes work great and come in a variety of sizes. I use one with a cloth over it to clean the insides of my GGTS and my GG Slim.
Good enough for my Desert Eagle, good enough for my GG's. Both are marvelous feats of engineering.
Great idea!!! I dug out some of my nylon bristle gun cleaning stuff and shined up those thread nice!!! I wonder if Hoppe's would work good? Works on my 9mm and doesn't damage anything, but leaves that nasty gun oil odor.
- Status
