E-mail address of the manufacturer, ask him your questions . zakaz@vpline.ruThanks. Just did, but it didn't show your mod, not a side by side.
You're too kind, Kat. We both have an affection for diminutive and inexpensive kit. A lot of my efforts go into making cheap stuff good rather than serving the gods of mod porn.
BTW, I'm impressed how Itty Bitty evolved into a kind of social community. Props to you.
found a few more (couldn't edit OP anymore (what's that about) so putting them here)
Zenesis sidewinder (how could I forget Zen's
): http://houseofhybrids.com/zenesis-sidewinder
size: unknown
atty depth: unknown (comes with dedicated rta tank)
atty diameter: unknown (comes with dedicated rta tank)
board: N/A (mechnical)
wattage: N/A (mechanical)
battery: 18350
cost: $279,-
Diablo Fulgoris: http://www.diablomods.net/diablo-fulgoris/
size: 26*50,5*92mm
atty depth: unknown
atty diameter: 23,5mm
board: DNA40
wattage/TC: 40W with TC
battery: 18650
cost: about $290,-
Kangside luxerybox: http://www.esmoke-ksd.com/index.php/Product-view-id-690.html
size: 26*64*81,5mm
atty depth: unknown
atty diameter: 23mm
board: Yihi sx300T
wattage: 35W no TC
battery: 18650
cost: about $35
Stig Helix: http://stig-mods.co.uk/shop/index.php/stig-helix-all-aluminium.html
size: 31*63,5*91mm
atty depth: 44mm (extension tubes to lower height available (to 6mm below top or flush))
atty diameter: 23,7mm
board: DNA30
wattage/TC: 30W no TC
battery: 26650
cost: about $450,-
(couldn't edit OP anymore (what's that about) so putting them here)Zenesis sidewinder (how could I forget Zen's
): http://houseofhybrids.com/zenesis-sidewindersize: unknown
atty depth: unknown (comes with dedicated rta tank)
atty diameter: unknown (comes with dedicated rta tank)
board: N/A (mechnical)
wattage: N/A (mechanical)
battery: 18350
cost: $279,-
Diablo Fulgoris: http://www.diablomods.net/diablo-fulgoris/
size: 26*50,5*92mm
atty depth: unknown
atty diameter: 23,5mm
board: DNA40
wattage/TC: 40W with TC
battery: 18650
cost: about $290,-
Kangside luxerybox: http://www.esmoke-ksd.com/index.php/Product-view-id-690.html
size: 26*64*81,5mm
atty depth: unknown
atty diameter: 23mm
board: Yihi sx300T
wattage: 35W no TC
battery: 18650
cost: about $35
Stig Helix: http://stig-mods.co.uk/shop/index.php/stig-helix-all-aluminium.html
size: 31*63,5*91mm
atty depth: 44mm (extension tubes to lower height available (to 6mm below top or flush))
atty diameter: 23,7mm
board: DNA30
wattage/TC: 30W no TC
battery: 26650
cost: about $450,-
dru, thank you again for doing this thread. What a wonderful idea.
The B Box sizes (as taken from my cheap kiddie calipers)
21.5* 54.5 * 88mm
- Billet Box: http://www.billetboxvapor.com/#!billet-box/c1h6a
Size: unknown
Atty depth: N/A (build in tank, 6.5ml)
Atty diameter: N/A (buidl in tank, 6.5ml)
Board: unknown
Wattage: 4-5.5V no TC
Batterij: 2*16340
Cost: $179
Oh blush. I'm not all THAT kind. But thank you for saying so!
Please do continuing posting your work, West. If not here, then definitely in our Itty Bitty thread. Initially, it was truly just a wild and fun idea, but as the numbers kept increasing for small, inexpen$ive mods, it began to take shape and have a real purpose! Now, I'd say you're right..... it's more social than not.
And that's fine by me!
The B Box sizes (as taken from my cheap kiddie calipers)
21.5* 54.5 * 88mm
- Billet Box: http://www.billetboxvapor.com/#!billet-box/c1h6a
Size: unknown
Atty depth: N/A (build in tank, 6.5ml)
Atty diameter: N/A (buidl in tank, 6.5ml)
Board: unknown
Wattage: 4-5.5V no TC
Batterij: 2*16340
Cost: $179
You're too kind, Kat. We both have an affection for diminutive and inexpensive kit. A lot of my efforts go into making cheap stuff good rather than serving the gods of mod porn.
BTW, I'm impressed how Itty Bitty evolved into a kind of social community. Props to you.
Oh blush. I'm not all THAT kind.
But thank you for saying so!Please do continuing posting your work, West. If not here, then definitely in our Itty Bitty thread. Initially, it was truly just a wild and fun idea, but as the numbers kept increasing for small, inexpen$ive mods, it began to take shape and have a real purpose! Now, I'd say you're right..... it's more social than not.
And that's fine by me!
Fine by me too! I will certainly keep following it.
Stig Helix: http://stig-mods.co.uk/shop/index.php/stig-helix-all-aluminium.html
size: 31*63,5*91mm
atty depth: 44mm (extension tubes to lower height available (to 6mm below top or flush))
atty diameter: 23,7mm
board: DNA30
wattage/TC: 30W no TC
battery: 26650
cost: about $450,-
Nice find @drugarth. Hardly any 26650 side by side mods out there. Can't afford this, but I intend to make a woody mech in that configuration. Thanks.
another addition:
Merbau by continental mods: http://continentalmods.eu/galeria/galeria2/
size: 29*57*92mm
atty depth: unknown (comes with height adjuster in 11m, 26mm and 36mm)
atty diameter: 24mm
board: N/A (mechanical)
wattage/TC: N/A (mechanical)
battery: 26650
cost: $230,-
there are more out there than I thought, but sofar I still like the Xvostick the best, it is one of the smallest devices and has a decent feature set, for not to big a price (compared to some out there that is..still expensive), also like the look the most.
But the Minion of tek-division also looks pretty good to me though
Merbau by continental mods: http://continentalmods.eu/galeria/galeria2/
size: 29*57*92mm
atty depth: unknown (comes with height adjuster in 11m, 26mm and 36mm)
atty diameter: 24mm
board: N/A (mechanical)
wattage/TC: N/A (mechanical)
battery: 26650
cost: $230,-
there are more out there than I thought, but sofar I still like the Xvostick the best, it is one of the smallest devices and has a decent feature set, for not to big a price (compared to some out there that is..still expensive), also like the look the most.
But the Minion of tek-division also looks pretty good to me though
Last edited:
another addition:
Merbau by continental mods: http://continentalmods.eu/galeria/galeria2/
size: 29*57*92mm
atty depth: unknown (comes with height adjuster in 11m, 26mm and 36mm)
atty diameter: 24mm
board: N/A (mechanical)
wattage/TC: N/A (mechanical)
battery: 26650
cost: $230,-
there are more out there than I thought, but sofar I still like the Xvostick the best, it is one of the smallest devices and has a decent feature set, for not to big a price (compared to some out there that is..still expensive), also like the look the most.
But the Minion of tek-division also looks pretty good to me though
BTW, there are some decent clones of a few of these mods, including this one (called "Black Oak").
Do you have an Xvostick? It's a very nice design, but that low fire button can be a deal breaker for some people. I put a lot of work into a Fog Box trying to get it so I liked it, but in the end I couldn't get past how uncomfortable the button placement was. Ended up scrapping it.
ooh nice find! Is it a mechanical?
These your own work or the black oak?
I like the button placement of the Xvostick...you just hold it in your hand and squeeze your hand for a vape...had doubts at first, but it really works well
These your own work or the black oak?
I like the button placement of the Xvostick...you just hold it in your hand and squeeze your hand for a vape...had doubts at first, but it really works well
Good to hear. I do love that swirly atty cage.
Yes, the Fog Box is mechanical. Discountvapers has it, among other places.
This is what I did to my Fog Box. Looked kinda cool in an odd way, but I could never get used to it in my hand. Scrapped it for parts.
Wow...that's some real craftsmanship! shame you scrapped it...I bet you could have found a buyer for that....envious off your skillz
Wow...that's some real craftsmanship! shame you scrapped it...I bet you could have found a buyer for that....envious off your skillz
Thanks. Some stuff just doesn't work out. Wouldn't feel right even giving it away.
Keep in mind that with some side-by-side mechs you can use a control head like this Wismec 30W. Saw one recently with a Goblin Mini on top that fit the mod perfectly. Best thing, it keeps the firing button where it is.
http://www.heavengifts.com/WISMEC-OLED-Screen-VW-MOD-Control-Head.html
http://www.cvapor.com/wismec-mod-control-head-vv-vw-with-oled-display-function.html
http://www.discountvapers.com/wismec-oled-screen-vw-mod-control-head/
http://www.heavengifts.com/WISMEC-OLED-Screen-VW-MOD-Control-Head.html
http://www.cvapor.com/wismec-mod-control-head-vv-vw-with-oled-display-function.html
http://www.discountvapers.com/wismec-oled-screen-vw-mod-control-head/
As I wait for my xvostick clone I am digging all these side by side mods, can't wait to see more.
