Low Resistance Magnum Atomizers

[cos]

I have been using my Lres atty 1.50 every nite and i am vaping heavily. I use Petes dart BFD and it golden. i do lift off the tip to make sure the wick is nice and wet then put tip back on then vapoe some more. but i keep checking and its always wet. i also use the Joye306 and i did make a BFD for it and it was pretty good but most times i just DIP it into a contact lens case. 1 nice dip gives me about 6 nice hits. also tried the 801 not bad and i am surprised cause usually i get great results with my 801. then when i am done with my Low restance atty i put the 2 batts for 6 volt vaping and use the 4.5 ohm 510 atty. that is fantastic also. I got that idea from Pete54. he told me to try it an dit does work great. but i would rather use a 3.7 v battery and a LR atty. Yeh i am very carefull with these LR attys but i do take soime real big hits and usually my head starts spinning. But i am a happy man. every nite from about 1130 to 3 am i am hitting the Mods and hitting them very heavy. need lot of nic for some reason. after that im kinda pooped so i go to bed about 30 am. But i do love these LR attys. I have 4 of them.
happy vaping

 

[redrose]

deleted, working it out at the nameless place!

 

[mwa102464]

I spoke to a very knowledgable person in the ecig supply world in China today after discussing these new LR Atty's my understanding is these Atty's are not perfected yet because of such low resistance they drain Batteries very quickly I mean very quickly, is anyone finding this with using these new Atty's, if you havent noticed please keep an eye on this and reply back on it if you would thank you...

 

[Scottbee]

I spoke to a very knowledgable person in the ecig supply world in China today after discussing these new LR Atty's my understanding is these Atty's are not perfected yet because of such low resistance they drain Batteries very quickly I mean very quickly, is anyone finding this with using these new Atty's, if you havent noticed please keep an eye on this and reply back on it if you would thank you...

<shrug>

They appear to drain my TorneGo batteries about 25% faster than a standard 510 atty... which is exactly what you would expect considering the resistance.

The resistance may be too low for smaller, lower mAh batteries due to their own internal resistance though.

 

[doots]

I spoke to a very knowledgable person in the ecig supply world in China today after discussing these new LR Atty's my understanding is these Atty's are not perfected yet because of such low resistance they drain Batteries very quickly I mean very quickly, is anyone finding this with using these new Atty's, if you havent noticed please keep an eye on this and reply back on it if you would thank you...

I don't think there is anything to prefect. It is just a lower resistant coil.

I have noticed no depreciation in battery life at all..

They seem to use battery much like my reg 510's. I am using 18650s so its hard to tell for me.

 

[DaMulta]

I wanna try the 20c battery on the DBSB, because it seems to rock more on the woody.

I got 2 more of them into day. That I installed on different PVs hehe. I think I tripped an aw 14500 protection on the BB today with it. Just waited a min(for the protection to turn back off), and it started right up again.

 

[lotus14]

I'm using mine with 14500s. The batt life is maybe a little shorter, but not much. They do draw more current, but the button presses are a bit shorter, so that compensates somewhat.

 

[mwa102464]

OK Scotbee thank you for being so honest, I know for a fact they do becauase they are not perfected yet, from what I hear all the ones out now are an early release but sometime in the very near future there will be an even better one out once they perfect them and it shouldnt take them long

 

[debook]

Ditto Lotus, I used mine most of the day on a 14500 mod while out and about and its still going strong. I took ScottBs advise and use it with a 901 cart cut back a little to avoid melting plastic and with a PTB rather than a foam mod and works great. I'm being very delicate with it though since I only have one, only let the cart get half empty before refilling (mostly at red lights!) to keep it very wet. waiting for the XShaler to make my next purchase from nhaler which will include more of these atty's, Octanes, and of course 1 or 2 XShalers!

 

[KingVapor]

I removed the bridge and wick today on one of these LR atties (no pics yet). The first thing I noticed, there was hardly any wicking at all in the one I gutted. Second, the LR atty has a more triangular bridge compared to a Joye 510. Third, it seems to have a shorter coil spread out over an equal distance. Fourth, there isn't a fourth. However, I would like to take the time to warn potential customers reading this thread not to attempt this because the atomizers are designed to work as is.


For the battery issue, I guess it would depend on the battery. I was able to vape for over 3 days on an 18650 before I had to switch out to another battery. I didn't even reach the cut off, but the vapor was too weak.

 

[Scottbee]

OK Scotbee thank you for being so honest, I know for a fact they do becauase they are not perfected yet, from what I hear all the ones out now are an early release but sometime in the very near future there will be an even better one out once they perfect them and it shouldnt take them long

A LR atomizer will ALWAYS drain a batter faster than a higher resistance atty. That's straight physics and EE, and there is no way to get around it or "perfect it" so that doesn't happen.

It's like a car engine..... you can't put in a bigger engine and not expect the fuel economy to go down.

 

[mwa102464]

A LR atomizer will ALWAYS drain a batter faster than a higher resistance atty. That's straight physics and EE, and there is no way to get around it or "perfect it" so that doesn't happen.

It's like a car engine..... you can't put in a bigger engine and not expect the fuel economy to go down.

Scottbee,

I think you took what I was saying the wrong way, when I said thank you for being so honest, I was really thanking you for letting us all know your Batt drained 25% faster and I really was thanking you. As far as stuffing the bigger engine in a car yes fuel economy may go down, however when the performance goes up, there are ways to tweek that performance, and really make it churn.. and this is what I heard they are working on to better these LR's, how, im not sure, but they are from wha I understand. Time will tell my friend time will tell, lets keep our eyes out over the next 3 months or so and see what happens, you and I might be very surprised the way this industry is moving so fast, who knows whats next.

 

[Drewsworld]

Thanks Guys...So you know I have been working onthese attys for months and other respected Ecig people and Chinese EEs have been working on it longer than me....I was just fortunate enough to walk in at the right time and had the willingness to take the financial risk of ordering the required MOQ(minimum oreder quanity)
I have said from the beginning that these will require better batteries and or High Drain cells capable of handling the amperage draw...My site is clear saying NOT to use these on regular batteries and that 440 mah or higher are reccomended...People will still try to use them on regular batteries Im sure...They will work , but they will surely decrease the life of the batteries and the atomizers...I kinda equate it to having a VW engine in a dump truck...It'll move and work , but not for long....Thanks
Drew

 

[Scottbee]

Scottbee,

I think you took what I was saying the wrong way,

I didn't take any offense at all. I'm just an ornery bahstahd....

I agree that the "efficiency" of this atomizer can be improved.. and I hope in time that it is. If it stays at 1.5Ω, the battery drain rate won't change... but vapor production may go up even more.

Here's the "duh" test on atty efficiency. If the outside of the casing on the atty gets hot, then power is being wasted... plain and simple. A "perfect" atty will use all of the power that it gets from the battery to convert liquid to vapor (specific latent heat of vaporization)... and none of the power will be used to heat the casing (or other internal components) of the unit.

If happy little bluebirds fly beyond the rainbow........

 

[cos]

hey guys i agree with every one of you. i dont know craqp about this stuff but im saying everyone here is correct in their way of thinking. This industry is moving so fast. look what happens if you buy the best camera on the market today. Tomorrow another comes out and better than the one you bought yesterday. Man since i came here in Oct i cant believe how far they came. amazing ..... Same with these Low Res attys. Drew just came out with them now everyone is following and China is always on the ball. so its just a matter of time that these LR attys will be so much better and better.
I love listening to you guys. Youse all amaze me. Thats right i said Youse. you expect me to say You'all dont think so. i may live in Florida now but i was born in Brooklyn NY USA and raised in manhatten and queens. so i say YOUZ GUYS.
anyway so much talent here. I wish i knew 1/4 of what you guys do. Keep on discussing stuff and we will learn more an dmore.
Thanks for all your input guys.
Now you guys talk about batterys. i have on my bike (a pedal bike lol) an 48 volt lithium battery that makes that sucker go 35 miles an hr. i know 35 mph aint .... but when your on a 26 inch bike trust me its fast. and this 59 yr old fool gets scared so i slow it down to about 28. i go to my kids house every day to walk the dog being he works long hrs.
everybody have a great day. just wanted to tell you guys how i appreciate all of YOUZ. Happy Vaping
Cos aka Billy G

 

[Drewsworld]

Your allyight Cos...You Brooklyn Guyz aint allda same, I'llsay dat...L8r
Drew

 

[DaMulta]

I just tested the 3 I have, and they all came up as 1.5Ohm on my Fluke.

 

[cos]

thanks DaMulta. hey whats a fluke. when i lived in NYC a Fluke was the opposite of a flounder. seriously though you said "1.5Ohm on my Fluke". sorry man i just lost. guess its been a long day. my excuse i old and forgetfull lol.

 

[kaji]

thanks DaMulta. hey whats a fluke. when i lived in NYC a Fluke was the opposite of a flounder. seriously though you said "1.5Ohm on my Fluke". sorry man i just lost. guess its been a long day. my excuse i old and forgetfull lol.

Fluke is a high end electronics company that makes meters, etc for professional applications. Top quality stuff.

 

[Kent C]

thanks DaMulta. hey whats a fluke. when i lived in NYC a Fluke was the opposite of a flounder. seriously though you said "1.5Ohm on my Fluke". sorry man i just lost. guess its been a long day. my excuse i old and forgetfull lol.

Eg.:
Amazon.com: Fluke 115 Compact True-RMS Digital Multimeter: Home Improvement