Man Cloud Help Please.

[SteveS45]

Too much power will over cook the e-liquid and that could account for No Taste. Just my personal observation and there is no scientific data to back up my statement so take it for what it is worth........

 

[WillyZee]

 

[r77r7r]

I won't be infecting my computer with a visit to that website, no.

http://cdn3.volusion.com/myrsg.dceqt/v/vspfiles/photos/TFV8RC-11.jpg?We're 1466694105We're not in Kansas anymore...

 

[Shawn Hoefer]

Okay i give up I just put some Tit coils in my Bellus,they come out at 0.40 i have it cranked up to600F and the power is set at 250W and i can vape it with no problem and yet my vapor is still poor and i don't seem to have as much flavour. I'm lost with all this now.
.

So, I'm not terribly familiar with Tit coils, I will admit... but I know the Bellus.

Also, sounds like you're using the RX200. Is that correct?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Canadian_Vaper]

Do yourself a favor. If you want to get away from mediocre clouds, buy an RDA

The Limitless is basically a RDA with a tank under it >.>

 

[humax]

So, I'm not terribly familiar with Tit coils, I will admit... but I know the Bellus.

Also, sounds like you're using the RX200. Is that correct?

Sent from my SAMSUNG-SM-N910A using Tapatalk

Yes i was trying it on the RX200

 

[Shawn Hoefer]

Yes i was trying it on the RX200

And, is it safe to assume you really meant Ti1 coils?

Take the tank off, and fire the device. If the device has the resistance locked, unlock it. Make sure the tank and coils are back to room temperature, and put it back on the mod. Make sure the mod is in Ti mode or in a TCR mode with the appropriate TCR value for the wire you're using. Set the preheat to around 40 watts. Set the temperature to about 420.

Let me know how it works...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

Okay done that and their is very little vaper and it feels cold.

 

[Shawn Hoefer]

Okay done that and their is very little vaper and it feels cold.

What's your build? Diameter, gauge, wraps?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

I'm using 27g with with 9 wraps with a diameter of 2mm

 

[Shawn Hoefer]

I'm using 27g with with 9 wraps with a diameter of 2mm

Single coil?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

No its twin coils

 

[Shawn Hoefer]

No its twin coils

There's a problem, then... dual 27 AWG Ti1 2 mm 9 wrap coils should be coming out closer to .18 instead of .4...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

I'm not sure why that is. Its reading the same on both mods and steam-engine is telling me the same thing ?

 

[Shawn Hoefer]

Pull the coils... you have a broken leg...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

Just had a quick pull and the legs seem fine there both glowing when i fire them up

 

[Shawn Hoefer]

Just had a quick pull and the legs seem fine there both glowing when i fire them up

Do not glow Ti... Ti and Ni should NEVER be dry fired. They are TC coils only and need to be kept below 600 ish... running them over that mark can lead to the release of nastiness...

Also, the coils need to be around 68F (room temp... it's not necessary to get the room to 68...) when mounted on the mod.


Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

I have got it at 520 now and the power is still at 40. Getting better clouds but not great. And the flavour is a little bit muted as well.

 

[Shawn Hoefer]

I have got it at 520 now and the power is still at 40. Getting better clouds but not great. And the flavour is a little bit muted as well.

I never thought about it, but it could also be your wicking... if the wick is too tight, juice might not be getting to the coils...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[humax]

You could be right i will re-wick it and give it another go