Mechs ohm laws wire choice is over whelming

Status
Not open for further replies.

dom qp

Ultra Member
ECF Veteran
Verified Member
Jun 15, 2015
1,847
9,890
36
South Central... Ontario
Lol that's a shop who also made a 30mm tank I can find kanthal pretty easy much all anyone has so I'll end up ordering 24 26 gauge of all 3 Friday sucks tho wanted to use the hugo squeezer today as I don't think any of the Claptons will work I got some really small think 26 36ssl I tossed the tiger coils away and threw in some 316 Claptons in my rabbit and they suck no flavor both coils for that where .50 even on both came to a .25 probably got the gauges wrong it was some spool I got a few months ago and wrapped a few but I can't remember what gauges going to end up tossing those away too and just start fresh

My head is spinning from trying to read that with one breath.
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,633
1
84,768
So-Cal
8-Bat-Mod.jpg
 

listopencil

Ultra Member
ECF Veteran
Jun 28, 2017
2,134
8,332
In Partibus Infidelium
I went to vapor gate and talked to them and few other shops I never been to and asked they made things clear mostly yoshi said he would sit down with me when I get my wire this is the same yosh who made the mason tank

Can't seem to find any wire tho

I'm pick up a spool for 24g 26g ni80 and 24g 26g 316l Friday when I get paid

Sounds good. Just from skimming this thread my impression is that you would be better off sitting down and talking this out with someone. That's not a knock on you. People learn differently. That's why people who train other people for a living have to be trained themselves. What a horrible world this would be if everyone's brains were exactly the same, right? I would suggest that you grab a notebook or a notepad to write stuff down. Bring it with you when you talk to the guy. Even go so far as to have the guy help you write down some of the more important or complicated stuff. Just stay safe and take it slow. If you make any mistakes, it's better if those mistakes result in a crappy vape that you learn from rather than a dangerous situation that causes you physical harm. Good luck!
 

fifamymaingame

Super Member
ECF Veteran
Jun 8, 2017
837
765
39
Colorado
Will see if I can even find time to go back to that shop it far as .... from me and I work alot

So if I don't like the flavor or vape i get once my wires in I'll post back here

Pretty much everything said here was what I was told today but more confusing then how you guys simply put it I didn't ask to many question today as I didn't have alot of time before work

Yes no grammar or punctuation I failed high school don't read or write in the real world


I'm going to try a 24g ni80 80 8 wrap see how that goes

Thanks for being nice and to the rude ones get off your high horse
 
Last edited:

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,633
1
84,768
So-Cal
Top and bottom four in parallel, and then both sets in series?

That's what they said on the Web Page where I got the Picture.

I think a 4-x-2 Eight Battery Mod falls into the "Just Because you can Doesn't mean you Should" category.

But Hey, It's still a Semi-Free Country. So what the Heck.
 

Topwater Elvis

Vaping Master
ECF Veteran
Dec 26, 2012
7,116
16,502
Texas
In Lakewood?
Oh boy the home of .14Ω is a reasonable build on a single cell mech & .07Ω is so rockin cool bro.
They sure didn't seem to believe in CDR the times Ive been there, only 'it isn't too hot to hold, bro.'

Yosh is an interesting character, nice guy.
He can teach you, you'll have to temper everything he says with your own comfort/ personal safety level. Which should be well under the CDR until you are confident in your own abilities.

Seriously, if you would've taken the advice given in this thread, asked specific well thought out questions on areas you didn't understand, practiced a few minutes, vaped a couple of your owns builds using these tips, asked how to improve this or that, you would already know what you're doing & wouldn't need to be taught.
Matter of fact, you probably would've been a confident, proficient & safe builder by last weekend.
It really isn't as hard as you are making it on yourself.

Good luck, I seriously hope you find what your looking for...
 
Last edited:

listopencil

Ultra Member
ECF Veteran
Jun 28, 2017
2,134
8,332
In Partibus Infidelium
That's what they said on the Web Page where I got the Picture.

I think a 4-x-2 Eight Battery Mod falls into the "Just Because you can Doesn't mean you Should" category.

But Hey, It's still a Semi-Free Country. So what the Heck.

I think that gives you a 10k mAh reserve that will push out 7+ Volts (for quite a while) with a decent Amp rating. I wouldn't trust that 35 Amp rating on the Efest label though. Probably more like 20, I don't know.
 

Asbestos4004

Vaping Master
ECF Veteran
Verified Member
Sep 11, 2013
6,802
28,169
Sugar Hill, Georgia
"There is a principle which is a bar against all information, which is proof against all arguments and which can not fail to keep a man in everlasting ignorance-that principle is contempt prior to investigation." --HERBERT SPENCER.
 

Topwater Elvis

Vaping Master
ECF Veteran
Dec 26, 2012
7,116
16,502
Texas
Yeah I'm just going to wait till I have wire in my hand and then post In here

From the confusion factor of printed word alone it probably would be a very good idea to take the time to go hands on with Yosh if he offered.
Keeping in mind, no matter what, you are responsible for your own saftey.
 

fifamymaingame

Super Member
ECF Veteran
Jun 8, 2017
837
765
39
Colorado
"There is a principle which is a bar against all information, which is proof against all arguments and which can not fail to keep a man in everlasting ignorance-that principle is contempt prior to investigation." --HERBERT SPENCER.

Look I'm trying to learn this is alot of info to take in don't be a dbag if you wanna be a douche go do it to someone in the real world see the results

Don't be that dude who look down on someone trying to learn

The way I look at it I hate this mech can't find the vape i want I sell it and wait for a 20700 dual reg squonk which I'm sure tons and tons will come out

But that being said I won't ask any more questions till wire is in hand and you guys suggest me builds to try
 

fifamymaingame

Super Member
ECF Veteran
Jun 8, 2017
837
765
39
Colorado
From the confusion factor of printed word alone it probably would be a very good idea to take the time to go hands on with Yosh if he offered.
Keeping in mind, no matter what, you are responsible for your own saftey.

Yeah just that shops like 50 minute drive from me one way and yosh isn't always in the shop I was surprised to see him there because he rarely ever is
 
  • Like
Reactions: stols001

Asbestos4004

Vaping Master
ECF Veteran
Verified Member
Sep 11, 2013
6,802
28,169
Sugar Hill, Georgia
Look I'm trying to learn this is alot of info to take in don't be a dbag if you wanna be a douche go do it to someone in the real world see the results

Don't be that dude who look down on someone trying to learn

The way I look at it I hate this mech can't find the vape i want I sell it and wait for a 20700 dual reg squonk which I'm sure tons and tons will come out

But that being said I won't ask any more questions till wire is in hand and you guys suggest me builds to try
Perhaps you should figure out the meaning of that quote before you go off on a tangent, scooter.
 
Status
Not open for further replies.

Users who are viewing this thread