Hi guys, I don't have a problem with leaking from the LED end but im experiencing alot of leaking on the sides of the cartridge. Ive done everything even just putting 2-3 drops on a brand new cartridge without dripping and I see big drops of liquid on the sides of the cartridge when I pull the mouthpiece out? Has anyone experienced this?
Merged old sticky threads (5)
- Thread starter Busaholic
- Start date
- th_trl_thread_readers 0
- Status
This is a pretty typical characteristic of 801penstyle carts. From what I have read, not much you can do about this! Nothing out of the usual however!
I guess that will depend on how they achieve "fully sealed" If they do it on the connector then probably not..If they leave the connector design alone Id have to say yes.
Hello everyone... I have a question about JantyUSA and their shipping. I placed an order on Monday (Order #5617) and then figured out from Ludo on how to pay for it, which I did Wednesday morning. Here it is Friday and I have not seen the first email on this and when I log into "My Account" on their website, it just shows Processing.
From your experience, has the package probably shipped and the website is not updated because they are working on the new one? Or does it take this long to get your order shipped?
Thanks guys, just trying to figure this out as this is my first order from them.
From your experience, has the package probably shipped and the website is not updated because they are working on the new one? Or does it take this long to get your order shipped?
Thanks guys, just trying to figure this out as this is my first order from them.
Does it really produce much more smoke that Janty atomaizer?
Maybe you can make video or picture, I would like to see it
Maybe you can make video or picture, I would like to see it
From your experience, has the package probably shipped and the website is not updated because they are working on the new one? Or does it take this long to get your order shipped?
Both.
With the old website, all orders show up as "processing," regardless of whether or not they've been shipped/fulfilled. That is supposed to be one of the things the new website will take care of.
If they have your items in stock, my experience is shipping is quite fast. The problem comes, imho, when they don't have all of your items in stock. There's a tendency to hold onto the order until they have everything so that they can ship all at once. Kind of annoying if you don't realize you've ordered something that's not actually in stock. That's another thing the new website is supposed to address--the ability to order only things that are in stock or specifically designated as preorder.
When your order ships, an email is usually sent with shipping information. Note the word "usually"--I've found that sometimes an email is sent and sometimes it isn't. Also, sometimes shipping emails are sent and get caught in spam folders.
If you've ordered things that you believe are in stock, I'd wait until Monday and then contact Ethan if you haven't heard anything. Remember, though, this is a three-day holiday for many U.S. businesses.
I have 4 relatively new UltraFire TR10440 labeled as 600mah and all do the same thing noted here by others...5-6 good drags and then the Stick LED dims and goes off...no more vapor. No such problem with any of my 5 Janty supplied ICR10440 360mah batteries. I also get very wimpy vapor when using the UF in my USB passthrough for my KB.
The strange thing is the UF all show 4V on my multimeter after they fail in the Stick.
Don't really understand it, but with the Janty batteries performing so well, and being so inexpensive, the UF's have been added to my pile of rechargables to be recycled.
The strange thing is the UF all show 4V on my multimeter after they fail in the Stick.
Don't really understand it, but with the Janty batteries performing so well, and being so inexpensive, the UF's have been added to my pile of rechargables to be recycled.
Last edited:
Your thread is very timely Techno...3 of my 801/4072 style attys have finally gone cold in the past week (but all were 6 months + old, and 2 of the 3 were used with very dark liquids like chocolate).
Did you get your 201 attys from litecigusa?
Did you get your 201 attys from litecigusa?
For what it's worth, wife and I just did a 7 day 92 mile kayak & camping trip in hot & humid Georgia. I took my Stick, 3 atomizers, 2 batteries and 2 APC mobile battery packs for recharging. Except when running rapids, the Stick rode fully exposed in an open mesh pocket of my life vest.
I did not vape nearly as much as I usually do during the day as my hands were otherwise occupied with paddling, but I made up for lost time in the evening. Only once did the Stick fail me - when I poured water on myself to cool off, forgetting the Stick was exposed. After a 15 minute dry out in the sun it was vapor as usual!
Not trying to be a shill or fanboy here, but compared to every other device I have used, the Stick with manual switch just plain works all the time assuming you have a good atomizer. Note: My experience has been that there can be significant variation in atomizers - even of the same brand, and that no one does a great job of producing consistant quality atomizers.
I did not vape nearly as much as I usually do during the day as my hands were otherwise occupied with paddling, but I made up for lost time in the evening. Only once did the Stick fail me - when I poured water on myself to cool off, forgetting the Stick was exposed. After a 15 minute dry out in the sun it was vapor as usual!
Not trying to be a shill or fanboy here, but compared to every other device I have used, the Stick with manual switch just plain works all the time assuming you have a good atomizer. Note: My experience has been that there can be significant variation in atomizers - even of the same brand, and that no one does a great job of producing consistant quality atomizers.
I'm chiming in here as well - just over 1 week, no questions asked, for a warranty replacement of my malfunctioning stick. Ethan got, read, and replied to my email within a half hour.... no questions asked... and now I'm once again with my happy little stick!
Janty Rocks!
Janty Rocks!
I try to give these guys props every chance I get. Their customer service is GREAT!
Thanks to ALL of you for your continued GREAT service. Thanks for everything!!
Mace
Thanks to ALL of you for your continued GREAT service. Thanks for everything!!
Mace
Yes, yes, yes...........Now enough back slapping. My v2 better be shipping out on Tuesday. Don't make me come down there!
I own a Screwdriver, Zi-Moshi, 510, 901, 801 penstyle, and 2 of the v1 Janty Stick.
The JS is #1 for me hands down. I have not experienced the issues with v1 that others have. With a built in passthrough and a battery that lasts 5 hours with heavy use (and cheap to replace too) it really is my primary ( and virtually only) vape. Janty stands behind their product, so if there are any issues, they will be resolved.
I already have v2 on order for shipment on 7/7.
I don't mean to sound like a total fanboy, but I have invested almost $3,000 in my total ecig experience, and for my money the Janty Stick is #1 so far.(That being said, my wife would probably get rid of me before she'd get rid of her 510, so the 510 is a great choice as well)
The JS is #1 for me hands down. I have not experienced the issues with v1 that others have. With a built in passthrough and a battery that lasts 5 hours with heavy use (and cheap to replace too) it really is my primary ( and virtually only) vape. Janty stands behind their product, so if there are any issues, they will be resolved.
I already have v2 on order for shipment on 7/7.
I don't mean to sound like a total fanboy, but I have invested almost $3,000 in my total ecig experience, and for my money the Janty Stick is #1 so far.(That being said, my wife would probably get rid of me before she'd get rid of her 510, so the 510 is a great choice as well)
Last edited:
- Status
Similar threads
