Merlin by Augvape and Roxy
- Thread starter MMW
- Start date
- th_trl_thread_readers 0
-
- Tags
- augvape merlin single coil
- Status
Just received my black version. Wicked up the notch coil and it vales like a dream. Only problem is the my afc ring is extremely loose. Anyone else have this issue?
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
Just built my SS. 1st attempt at wicking gave me a 1 way ticket to flood city. Did some minor adjusting and wow. I'm super impressed. Its a beautiful tank. Threads are buttery smooth. Afc and Jfc have just the right tolerance. I have nothing negative to say about the Merlin. I have 2 and I can guarantee 4 more will be gracing my vape stand.
Sent from my LG V10 using Tapatalk
Sent from my LG V10 using Tapatalk
If your air flow ring is too loose, maybe it's wet from cleaning it? Try letting it dry overnight or blow the water out with compressed air??? I had mine sit in alcohol for a while and used my compressor and blew it out. Mine is not tight but it's not too loose either.
Woot!
I just won a Silver version from the other place, gonna make a sweet twin for my Black one!
Stoked!!!
I just won a Silver version from the other place, gonna make a sweet twin for my Black one!
Stoked!!!
I hate the stock tip too... I'm using different ones until I find the ones that I like.I guess I'm one of the few that prefers a different drip tip.
Thought I would be set once got 1 more silver and a black one, but now I've seen how good the black one looks, might have to get another one.
@ricks these have made me put the kayfun mini v3's in the backup draw now
Also I never bothered with the stock drip tip, to wide for my vaping style, I have high power mods, but MTL vaping at a massive 16 watts
@ricks these have made me put the kayfun mini v3's in the backup draw now
Also I never bothered with the stock drip tip, to wide for my vaping style, I have high power mods, but MTL vaping at a massive 16 watts
Here's how I wick.
3mmID 26g ss316l, 9/8wrap.
Cut cotton a little wider than the base.
Fluff the cotton so it's nice and airy.
Then fold(don't pack) the bottom 1/4 into the cup.
While remaining fluffed, cover the rest of the top of the cup and a little on the deck.
I have found that not much below the juice holes works the best. Cover the top and jeep it fluffy. I use anywhere from 50/50-30pg/70vg.
I usually go from 25w-40w, which is how I like to vape. Not high power or low power. The flavor on this tank is great and the above wicking keeps up with no issues.
Sorry for the long post folks.
3mmID 26g ss316l, 9/8wrap.
Cut cotton a little wider than the base.
Fluff the cotton so it's nice and airy.
Then fold(don't pack) the bottom 1/4 into the cup.
While remaining fluffed, cover the rest of the top of the cup and a little on the deck.
I have found that not much below the juice holes works the best. Cover the top and jeep it fluffy. I use anywhere from 50/50-30pg/70vg.
I usually go from 25w-40w, which is how I like to vape. Not high power or low power. The flavor on this tank is great and the above wicking keeps up with no issues.
Sorry for the long post folks.
Fantastic information.Here's how I wick.
3mmID 26g ss316l, 9/8wrap.
Cut cotton a little wider than the base.
Fluff the cotton so it's nice and airy.
Then fold(don't pack) the bottom 1/4 into the cup.
While remaining fluffed, cover the rest of the top of the cup and a little on the deck.
I have found that not much below the juice holes works the best. Cover the top and jeep it fluffy. I use anywhere from 50/50-30pg/70vg.
I usually go from 25w-40w, which is how I like to vape. Not high power or low power. The flavor on this tank is great and the above wicking keeps up with no issues.
Sorry for the long post folks.
Sent from my LG V10 using Tapatalk
Is anyone elses juice control pretty much impossible to turn? My AFC works great but the JFC is extremely hard to turn if I'm lucky. Other than that, great tank so far, have to test it for the day before I can really say. Thanks all
- Status
