- Status
Make sure you dream about winding it in the correct direction...24ga twisted SS. Guess I can try to rewind them. Heading to bed, long day. Ill dream on it
I understand what people are saying with Flav. Does seem a bit tedious trying to find the right spot. Flav wasnt crazy bad on my first build but a lot to be desired so I had time to rebuild last night.
Did a SS316 Clapton last night. Flav is much better now. I don't vape in Wattage. It's all TC for me. I do the same as my Dual Coil Engine and don't touch the bottom well. It's slightly above it.
Did a SS316 Clapton last night. Flav is much better now. I don't vape in Wattage. It's all TC for me. I do the same as my Dual Coil Engine and don't touch the bottom well. It's slightly above it.
I never had top-airflow before and it's a godsend! 24 hours has now passed and not the slightest condensation-ring or seepage or anything. Dry as can be! Ohh, in my previous post I forgot to say I was using 24g wire, though not that importat probably for you guys as I guess most use SS/TC. I'm old-school and use kanthal and power-mode and mechs before that. I haven't used my merlin since gotten this I don't get it, but with my merlin then no matter how much I spread the cotton-tails out and away from the airflow with a screwdriver, then the airflow still at times is affected and you can feel there's very slight fluid somewhere and impeeding airflow. This comes and goes throughout andf is really annoying to me, which was the single thing I didn't like. Needless to say this isn't happening on this design. I love the formfactor and also the driptip too me is perfect with it's size and shape. This tank fits perfectly with my all-black realeux rx2/3 in two-batery configuration without any overhang and is a great little compact config. Just simply nice.
I don't get it, but with my merlin then no matter how much I spread the cotton-tails out and away from the airflow with a screwdriver, then the airflow still at times is affected and you can feel there's very slight fluid somewhere and impeeding airflow. This comes and goes throughout andf is really annoying to me, which was the single thing I didn't like. Needless to say this isn't happening on this design. I love the formfactor and also the driptip too me is perfect with it's size and shape. This tank fits perfectly with my all-black realeux rx2/3 in two-batery configuration without any overhang and is a great little compact config. Just simply nice.
Where did you place the coil height in relation to the posts? It seems that coil height is really important in this atty.I never had top-airflow before and it's a godsend! 24 hours has now passed and not the slightest condensation-ring or seepage or anything. Dry as can be! Ohh, in my previous post I forgot to say I was using 24g wire, though not that importat probably for you guys as I guess most use SS/TC. I'm old-school and use kanthal and power-mode and mechs before that. I haven't used my merlin since gotten this
It's here, it's here! USPS lied in my favor 
I have played with all, but usually go a little high, so the coil top is just little under top of posts, but have tried variations. I don't either understand how it's even possible? I take a small screwdriver and make sure that there's no cotton touching the airflow-hole and neither touching the base the hole is in. The tails are into the cups and it can be seen that there's an empty line on both sides besides the "airflow-base". I know it's important to wick like that sometimes, like e.g. that old pbusardo video of the orchid rta, where he talks about not even letting the tails be close to anything inline with airflow. It can be felt when taking a draw. One draw is slightly more restricted than others and mid-draw you can even feel it too. Though it doesn't leak at all. Well, except regular condensation. Also tried 2mm - 3.5mm coil IDs. I still really like it, but I wish I could fix that annoyance.
Thank you anyways
Edit: I'm an idiot it seems, sorry
I thought it was a question about my merlin issue. Sorry! I placed coil as close the posts as possible and at the middle where the holes naturally alligns the coil, though will play with higher and lower too-
Last edited:
Mine's also out for delivery, along with the replacement Hadaly o-rings Two 10m spools of twisted 26 kanthal arrived yesterday, so I'm well stocked in that department [emoji106]
Two 10m spools of twisted 26 kanthal arrived yesterday, so I'm well stocked in that department [emoji106]
Last edited:
I was waiting for the Gold Nano and just placed my order from 3fvape.
From everything I have read this is going to be a great tank.
Sent from my SM-N910P using Tapatalk
From everything I have read this is going to be a great tank.
Sent from my SM-N910P using Tapatalk
Mine's out for delivery also! Several ppl getting theirs today it seems....lolMine's also out for delivery, along with the replacement NaRDA o-rings
I just got a Narda.Tested it briefly and the flavor was great.I was a little worried about the airflow as I usually prefer DTL but it seemed fine.(waiting on my Pico Squeeze)Mine's also out for delivery, along with the replacement NaRDA o-rings
FT is playing the old shell game with My Squeeze and OBS Nano. ETA has changed three times now.Just 1 more day!! Yeah right!
Last edited:
D'oh on my part -- o-rings are for the SXK Hadaly clone The base o-rings are super tight, someone on FT suggested trying a 1mm width, so I have a pack of 20 coming today. The SXK Hadaly comes with a squonk pin, an excellent setup.
I do love my NaRDA (clones). I use one every night for dripping, second is emergency backup gear for travel (if a tank goes west).
The base o-rings are super tight, someone on FT suggested trying a 1mm width, so I have a pack of 20 coming today. The SXK Hadaly comes with a squonk pin, an excellent setup.I do love my NaRDA (clones). I use one every night for dripping, second is emergency backup gear for travel (if a tank goes west).
The Engine Nano is in the house, so far it is a great little RTA. I have a Goblin Mini V3 and an Ammit arriving next week so we will see how it compares.
Honestly what a difference it has made switching from reg SS316 to Clapton SS316. Both coils were hitting .55Ohms and vape at 425F and the difference is night and day for some reason. Both coils right in the middle in height
- Status
