yeah, i have the same issue. i also cracked one ceramic by cooking it too long so be careful. cooking it seemed to help tho...not sure its completely gone but its getting there.
Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
yeah, i have the same issue. i also cracked one ceramic by cooking it too long so be careful. cooking it seemed to help tho...not sure its completely gone but its getting there.
put vaseline and screw-unscrew it several times putting force. When it will fit then it will always fit nicely Jal
Thanks for the tip. Does Noalox do the trick as well, or is vaseline best way to loose threads?
Well I dropped my beloved Ody Nice scuff on the side of the tank. Would this require some aggressive buffing to remove? It's not that deep, can't even feel the scuff, but looking at it drives me crazy Maybe just some flitz or something along those lines? Anyone have experience removing scuff marks like this?
Nice scuff on the side of the tank. Would this require some aggressive buffing to remove? It's not that deep, can't even feel the scuff, but looking at it drives me crazy Maybe just some flitz or something along those lines? Anyone have experience removing scuff marks like this?
For the best slip and thread grinding surface can impolzovat even car oil. Then, after the removal of the surface roughness can lubricate the threads with petroleum jelly Jalippo.
use a very thin sandpaper (like a 1500). Then use polish cream Ty
Well I dropped my beloved Ody
try to put on a flannel cloth DIALUX VORNTX (brossage-polissage-avivage) - this is for rough polishing, and then to another flannel cloth - DIALUX BLANC.
I think these polishes will remove minor scratches.
I think these polishes will remove minor scratches.
Well I dropped my beloved Ody
Well I dropped my beloved Ody
If you have a dremel get yourself the buffing pack and get to work. It works great and gets rid of scuff marks
GUYS I FOUND OUT WHAT WAS WRONG WITH MY ODDY SET UP!!
The black plastic disk that goes on the center pin to screw into the housing, I put it inside the housing, so the center pin was making direct contact with the housing, since I would screw it all the way securely on the housing. I realized it now and am going to try to blow the dust off my oddy and see if I can build me a coil
The black plastic disk that goes on the center pin to screw into the housing, I put it inside the housing, so the center pin was making direct contact with the housing, since I would screw it all the way securely on the housing. I realized it now and am going to try to blow the dust off my oddy and see if I can build me a coil
Here is my Odysseus Setup at the moment i wait for my GGTS!
Ive made polished Cones for Provari now it looks better
thx florian
Ive made polished Cones for Provari now it looks better
thx florian
You all will Arctherus
GUYS I FOUND OUT WHAT WAS WRONG WITH MY ODDY SET UP!!
The black plastic disk that goes on the center pin to screw into the housing, I put it inside the housing, so the center pin was making direct contact with the housing, since I would screw it all the way securely on the housing. I realized it now and am going to try to blow the dust off my oddy and see if I can build me a coil
Last edited:
Here is my Odysseus Setup at the moment i wait for my GGTS!
Ive made polished Cones for Provari now it looks better
View attachment 118720View attachment 118721View attachment 118722View attachment 118723View attachment 118724
thx florian
Can I buy one of those off you? That looks great.
Sent from my EVO using Tapatalk 2
GUYS I FOUND OUT WHAT WAS WRONG WITH MY ODDY SET UP!!
The black plastic disk that goes on the center pin to screw into the housing, I put it inside the housing, so the center pin was making direct contact with the housing, since I would screw it all the way securely on the housing. I realized it now and am going to try to blow the dust off my oddy and see if I can build me a coil
Congrats! Sounds like you had one of those V8 moments. If you don't have an extra oring, you could wrap a small piece of wick around the stem. It should protect the ceramic and add enough space so the threads of pin aren't longer than the nut. You should be well on your way to a nic-coma!
Here is my Odysseus Setup at the moment i wait for my GGTS!
Ive made polished Cones for Provari now it looks better
View attachment 118720View attachment 118721View attachment 118722View attachment 118723View attachment 118724
thx florian
How is the draw with the cone on it?
cheers Arc
GUYS I FOUND OUT WHAT WAS WRONG WITH MY ODDY SET UP!!
The black plastic disk that goes on the center pin to screw into the housing, I put it inside the housing, so the center pin was making direct contact with the housing, since I would screw it all the way securely on the housing. I realized it now and am going to try to blow the dust off my oddy and see if I can build me a coil
Here is my Odysseus Setup at the moment i wait for my GGTS!
Ive made polished Cones for Provari now it looks better
View attachment 118720View attachment 118721View attachment 118722View attachment 118723View attachment 118724
thx florian
You must have modified the connector cap to get the cone flush to the tube body. How does the cone attach?
- Status
