That's bad news, Imeo. Nevertheless Odysseus will be awesome and I'm convinced you'll find a solution as always 
Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
sad to hear this - and glad to see you're not giving up on this and believe there has to be a way.
Any info on what you've been trying? Just out of curiosity
probably because need something to hold the liquid while keeping the vaporizing effect controlled and consistent. Without a wick it can either be too much liquid which makes it boil and spit or too little which gives burn taste of the heat wire... Just a thought
An idea for a wick-less atty coil.
Another possibility would be to engineer a turbine/turbo that is driven by the air drawn through the device that in turn sprays/releases raw liquid onto the coil, but only when the turbine is active.
An idea for a safer ceramic wick.
Wrap the heating coil around a small porous/perforated ceramic hollow tube and run the wick through the tube that the coil is wrapped around.
Another possibility would be to engineer a turbine/turbo that is driven by the air drawn through the device that in turn sprays/releases raw liquid onto the coil, but only when the turbine is active.
An idea for a safer ceramic wick.
Wrap the heating coil around a small porous/perforated ceramic hollow tube and run the wick through the tube that the coil is wrapped around.
Good thought Poppa, not necessarily wickless but you also don't have to worry about scorching the wick +1 for thinking outside the box. Can't wait for this guy to be ready, tinkering is my middle name.
Thinking capillary tubes from pyrex combined with a short piece of wick and the perforated ceramic might be the ticket
I will make a video tonight to show you what I did von
sad to hear this - and glad to see you're not giving up on this and believe there has to be a way.
Any info on what you've been trying? Just out of curiosity
Thats what was happening race. Its the material I used that cant do the job properly
Thats what I really did Poppa but without the wick. Ceramic is too thin to make holes in it
Well that's too bad but it is not end of the world. You are still young Imeo
Odysseus is out of this world even without wickless method! It would be end of world if I don't get one in full mode before Christmas lol kidding of course
Odysseus is out of this world even without wickless method! It would be end of world if I don't get one in full mode before Christmas lol kidding of course
... It would be end of world if I don't get one in full mode before Christmas lol kidding of course
110+% in agree with you!!!
+1 Indeed.
b.t.w. I can't help get a little jealous of your SS GGTS #777. Sick number. I am content with my SS GGTS #370 mind, though your 7's tops mine.
Even if I think that Odysseus is a crazy project, I still wanted to make it even better. But I failed this time. I will show you a video about how it vapes and then I will show you its internal parts
No Imeo you didn't fail. You have suffered a setback in one facet of the design of Odysseus, not in the entire project. Besides, the wickless feature is easily an add-on to Odysseus and needn't be included in the original offering. Especially if it slows down the rollout of the Odysseus. I'm looking forward to buying two of the complete Odysseus units. I'm cocked and locked baby!!
How about combining a couple of the suggestions: Some pyrex tubing that capillary wicks to a porous ceramic piece to wrap the coil around?
Going wickless is an ambitious project, many failures are to be expected before you can acheive such a tour de force Imeo. Dont give up yet !
Will there be an GGTS without top cap + Odysseus? A kind of already fixed combination?
It is such a pity, that my air control ring with collector tank from the GGTS sits so lonely here around, because there is now a UFS V2 on top of the GGTS.
Andreas
It is such a pity, that my air control ring with collector tank from the GGTS sits so lonely here around, because there is now a UFS V2 on top of the GGTS.
Andreas
I can confirm this, I use the extender from a UFSv1 on my UFSv2 and I've noticed an issue with juice leaking out of the threads if it gets flooded and I need to blow it out... also think I've been having leaking/flooding issues a bit too much like this. If you want to, the best way I've found to do it is to use the UFSv1 on the window then the UFSv2 on top of that, other way around doesn't sit well.
First off I have to say, I haven't watched all of the videos yet. I've hesitated in doing so because I wanted to try and curb my enthusiasm for as long as possible. I watched a few last night, and I have to say Imeo, that ODY looks amazing. I really like the design of it. I think you've got a winner on your hands (I had no doubt about that) the atomizer assembly is beautifully elegant.
Don't get discouraged about the wickless concept, there's an answer! We just have to find it!
Don't get discouraged about the wickless concept, there's an answer! We just have to find it!
You will need this lonely piece when you will have Odysseus in your hands Andreas
- Status
