Odysseus official

[rwechsler]

Well then I'm definitely going to have to get some. Just setup a 0.7-8ohm coil with 2 wraps of 32g and it's working really poorly in UFS ody mode, gna hve to rebuild it later xD

I got the thicker silver wire from Welcome to Crystal Mountain Beads Store, Niagara-On-The-Lake, Ontario

The flavor is superior (in my opinion, ymmv), vapor superior, th equal, or less.

I did use it in my katana. Worked great!

 

[CaptSteve]

Rick I got mine here .999 30 gauge silver NR

.999 Fine Silver 30 Gauge Round Dead Soft Wire

 

[thejager]

Im curious to hear about this 32g 2 wrap method, you done 30g too? i too am looking for .7-.8ohm single coils for my Ody...

post your rebuild notes and progress!

Well then I'm definitely going to have to get some. Just setup a 0.7-8ohm coil with 2 wraps of 32g and it's working really poorly in UFS ody mode, gna hve to rebuild it later xD

 

[dspin]

Anyone tried 28 or 30g kanthal in their odys? I was thinking about getting some to start wrapping some extremely low resistance coils for 3.7v vaping.

For example:

Take two pieces of 34 G or 36 G wire that meter out to 2 ohm each - then twist them together and wrap with that - they will then become 1 ohm. Heavier wire takes to much to fire.

 

[rwechsler]

For example:

Take two pieces of 34 G or 36 G wire that meter out to 2 ohm each - then twist them together and wrap with that - they will then become 1 ohm. Heavier wire takes to much to fire.

Yeah, I've used the twisted method before, but I find the coils gunk up much faster than a single strand coil.

 

[Mosin_Sergei]

I agree with that.
I also switched to a single thread to spiral.

, but I find the coils gunk up much faster than a single strand coil.

 

[CaptSteve]

If you want to avoid the gunk up of the twisted method you can make a dual coil like this one guys. I've tried it and it works great

 

[Mosin_Sergei]

Thank you my friend Steve.
I saw this video.
in all of its harmful sprays I use nichrome year 0.2.
This is sufficient to produce 8-10 watts.

If you want to avoid the gunk up of the twisted method you can make a dual coil like this one guys. I've tried it and it works great

 

[rwechsler]

I've tried both dual coil setups, but I've always had the best results with just using a single strand of r wire.

 

[Mosin_Sergei]

Ur package with Audie in Moscow.
Just as she's protamozhitsya ... question.
But glad that it is already in Russia: Rickroll:

 

[Madshock]

So far with all my experiments with coils and even mesh setups. My favorite is still on a 1.1-1.2 ohms Single coil setup.

3cm +/- 1mm or so, Kanthal A1 32g is what i use. Best vapor and flavor just the way i like it. Oh.. and its on Mr Krinkle's wick style but i used 2X 1.5mm Wicks i got from Esmoke-guru instead.

 

[Poppa D]

I am trying the Mercerized %100 cotton #3 yarn for wick in my Ody, it is easily out performing the silicone wick.

 

[Ariel_MX]

I am trying the Mercerized %100 cotton #3 yarn for wick in my Ody, it is easily out performing the silicone wick.

I'm also trying the mercerized %100 cotton yarn (the one I got is #8) in my Odysseus (two strands), so far is working good.

I also bought some gauze and some facial pads (100% cotton) to experiment

 

[CaptSteve]

How come that stuff doesn't burn guys? Cotton isn't heat resistant as far as I know

 

[Mosin_Sergei]

Just a wick of cotton should be kept in the juice.
. Russia also uses cotton gauze and even, yarn and thread of "Lipton"

 

[Poppa D]

In the Modders forum the thread "Wick materials, safe vs dangerous", an in-depth discussion about cotton is going on.

 

[Ariel_MX]

How come that stuff doesn't burn guys? Cotton isn't heat resistant as far as I know

Hi Capt,

as my friend Mosin said, as long the wick is kept moisturized it won't burn, cotton absorbs liquid very well

(2nd day and still working ok (same tank))

EvilGrym started a thread about this: http://www.e-cigarette-forum.com/forum/modding-forum/284030-wick-materials-safe-vs-dangerous.html

A Russian discovery

(If the memory does not betray me) I remember Mosin commented something about it (in a post lost somewhere)

 

[NandyDC]

Im lost, what is all about cotton wick? Mercerized 100% cotton? Any setup pics?


Sent from my iPhone using Tapatalk

 

[Ariel_MX]

Im lost, what is all about cotton wick? Mercerized 100% cotton? Any setup pics?


Sent from my iPhone using Tapatalk

Yes, instead the normal wick

It looks pretty the same as the normal setup. I bought #8 100% cotton yarn at supermarket (Poppa D is using #3), I think the number on cotton yarn is like the diameter on wires (AWG)

I do not know much about cotton yarns (when I came back to the office with the cotton yarn I just bought, a coworker asked me: "are you now in the crochet learning?"

I will take some pictures after finishing this tank.

 

[CaptSteve]

Thanks Ariel,

I'll look into this sounds interesting.

Hi Capt,

as my friend Mosin said, as long the wick is kept moisturized it won't burn, cotton absorbs liquid very well

(2nd day and still working ok (same tank))

EvilGrym started a thread about this: http://www.e-cigarette-forum.com/forum/modding-forum/284030-wick-materials-safe-vs-dangerous.html

A Russian discovery

(If the memory does not betray me) I remember Mosin commented something about it (in a post lost somewhere)