Odysseus official

[craftmath]

if you have 5 o-rings in total then you are ok craft
Odysseus short mode (new rebuildable style)

16x1,5 (2) Odysseus base, between refilling cap and body
3/1,78 under center pin
9x2 between caps
3x2 (under the center post's top nut)

One of those being plastic imeo?

 

[imeothanasis]

Bruce forgot to put them inside sespy? I am very sorry buddy. I hope he will serve as soon as possible

Ever seen a grown man cry? My first rebuildable arrived today... a shiny new Ody (Drip Mode). But alas, no wick, no wire. Cannot use. I even checked the seams and crevices of the packing material. Nope. Sigh.

 

[imeothanasis]

No, these are the o-rings. The plastic is not on this list craft

One of those being plastic imeo?

 

[craftmath]

I'm missing the one under the center post top nut which means I have a center post top nut tighten directly onto the bottom of the ceramic cup.

 

[imeothanasis]

thats not a problem craft, no worries

I'm missing the one under the center post top nut which means I have a center post top nut tighten directly onto the bottom of the ceramic cup.

 

[EsxPaul]

if you have 5 o-rings in total then you are ok craft
Odysseus short mode (new rebuildable style)

16x1,5 (2) Odysseus base, between refilling cap and body
3/1,78 under center pin
9x2 between caps
3x2 (under the center post's top nut)

I'm very glad you posted this, Imeo

I had the 3/1,78 and the 3x2 the wrong way around!

It is very easy to get them mixed up unless you compare them very carefully. I have noticed that the 3/1,78 will fall down easily into the ceramic whereas the 3x2 has to be pushed into the ceramic with a small screwdriver because there is some small resistance.

 

[Digitaltitan]

im so sad, Redgirl in york has her Ody, and i do not i may have to drive the 100 miles over to her to see hers XD

 

[imeothanasis]

let them as they are Paul, no problem at all.

If you put the 3x1,78 under the pin then the center post will go lower and you will be able to see more of it out of the 510 threads. If you put the 3x2 under the post then post will come out of the 510 threads less. Do as you like better

 

[N1tro]

Sorry to bother you again imeo , but after seeing pics of ppls new ody is the mouthpiece slightly higher on the new batches of odys compared to the old odys out there. Or is it just my eyes lol . Thx once again everyone that's makes products should be as hands on as you when it comes to customer service

 

[Karlos]

I think I did it all wrong. I checked the wiki exploded diagram for Ody. It shows the small o-ring on the center pin, then the ceramic assembly and then the little nut inside the ceramic. I did it so.

Now I see, the little o-ring, the 3x1,78 should go inside the ceramic and then the nut? Or am I nut?

Sorry Imeo for all those questions. I am such a newbie. The Ody is my first piece from you. I am really looking forward to getting the P/P and the GGTS soon. I am sure you make great products.

Edit to answer my own question:

I did it right. Putting the o-ring inside the ceramic would do short circuit between the center post and ceramic housing.

Sorry for bothering you all over, Imeo.

 

[mrgoodwrench2u]

Yes Imeo, I just got my Odysseus today and it is the best, super hit ! I mean excellent draw air flow and mega vapor and taste.

I never knew that much air/draw and vapor and flavor was possible till I hit the Ody , Gee Wizz , I'm a Happy Customer !!!!

(So I screwed it all the way down on my Chrome Lava Tube ,((only because I don't have a SSGGTS yet)) and it vaped amazing, the grooves/channels, cut into the base is a perfect air draw ! ) The new base design is perfect.

For my first GG product purchased, I'm very happy and I think this is the beginning of a serious GG product addiction.

yes nitro. This is the base for all mods and GGTS ody base is coming. In fact my sellers already have it

 

[dspin]

Yes Imeo, I just got my Odysseus today and it is the best, super hit ! I mean excellent draw air flow and mega vapor and taste.

I never knew that much air/draw and vapor and flavor was possible till I hit the Ody , Gee Wizz , I'm a Happy Customer !!!!

(So I screwed it all the way down on my Chrome Lava Tube ,((only because I don't have a SSGGTS yet)) and it vaped amazing, the grooves/channels, cut into the base is a perfect air draw ! ) The new base design is perfect.

For my first GG product purchased, I'm very happy and I think this is the beginning of a serious GG product addiction.

Welcome to the GG fam. MrG.. Glad you finally got one and your lovin it. Cant wait to hear what you say when you get a GGTS.

 

[dspin]

Ever seen a grown man cry? My first rebuildable arrived today... a shiny new Ody (Drip Mode). But alas, no wick, no wire. Cannot use. I even checked the seams and crevices of the packing material. Nope. Sigh.

Thats awful sespy - shoot Bruce a pm right away. He has help now and I suspect thats what happened. I daresay Bruce himself didnt prepare your package or that would never have happened.

 

[compltaset77]

yes yes yes ye... ah man
i was so happy to get my ody i tore in that bag with that sparkle in my eye like on christmas when i was a kid
but alas i only recived the ody a bag of wick and one bag of wire not sure if its r/wire or nr/wire
with all the rush to get orders out some my be missing some wire or wick oh well bruce and his team will make it all better
and well be back on the vape train once again vapor :

 

[RiverNut]

You will not regret the purchase of Odysseus springfieldarms

I just got mine and I can't put it down long enough to make my first coil It's sooo cool!

I can't stop touching my Ody

Edit: Damn Imeo, this thing is amazing! Very very impressed...design is genius, machining is top notch, and the vape....OMG! The juice control rocks! This is the best decision I've made since quitting cigs. I have a new addiction Thank you!

 

[AppendixG]

but alas i only recived the ody a bag of wick and one bag of wire not sure if its r/wire or nr/wire

That's a pre-made wire, it's both R and NR wire, all you have to do is wrap the thinner portion around the wick and you're good to go!

 

[compltaset77]

That's a pre-made wire, it's both R and NR wire, all you have to do is wrap the thinner portion around the wick and you're good to go!

ah ha duh such a noob lol

 

[craftmath]

Its a shame there is only one wire though included with the ody. I was hoping for a few because I keep getting less than 2ohms. Looking for something around 2.5 to 3ohms. Anybody know of places to get NR wire? I have some ordered, but that means I can't use my Ody until the extra NR wire arrives. I've seen silver plated tarnish resistant wire at the hobby shop but can't find anyone who has used that. Also read that you can find NR wire in power cords, but I wouldn't know what the hell I'm looking at. Any solutions?

 

[AppendixG]

My lady does a lot of hobby jewelry making, at the bead shop that she goes to they sell .999 silver wire. That'll work (even better than the nickel stuff, technically) you just need to take a little more care with it because it's slightly more fragile.

Its a shame there is only one wire though included with the ody. I was hoping for a few because I keep getting less than 2ohms. Looking for something around 2.5 to 3ohms. Anybody know of places to get NR wire? I have some ordered, but that means I can't use my Ody until the extra NR wire arrives. I've seen silver plated tarnish resistant wire at the hobby shop but can't find anyone who has used that. Also read that you can find NR wire in power cords, but I wouldn't know what the hell I'm looking at. Any solutions?

 

[MrJonesJr]

I think someone just found NR wire at a Michael's Craft store in the jewelry section. Maybe try there or somewhere similar.