Odysseus official

[kickitback]

Thx Kick, I guess the karma gods smile on whiners cause literally 2 secs after I posted I got a PM and made a good deal for a brand new V2 Paid a small premium, but can't put a price on a good time (actually I guess you can, but it's worth it). I won't mind waiting on pre-orders if I have something to play with. Really curious about the Ithaka and the VIR (hence the GG thread stalking...)

That's awesome. Lots of great people who always willing to help on the GG forum/family.
I been trying to build another ody2 for a while now so you not alone. It's truly an awesome device just like the Penelope,ggts or any Made by Imeo " device lol

 

[RiverNut]

We cant make a bigger hole on the center post river. But enlarging the holes on the CT maybe will give you a little more airy draw. I dont really know but please make a try if you like

Well it's official, the Ody/GGTS can't be any better!! I enlarged the air hole on the collector tank and now I can actually draw on the Ody as opposed to just letting the vapor collect in my mouth before I inhale. I can now utilize the air control to fine tune my draw and will definitely be doing the same to my other TS collector tank. Imeo, if it's not too late in your current production of GGTS you should double the size/length of the air hole as it truly makes a BIG difference in the adjustability of the draw...nice and airy to as tight as you want it.

For others who also feel the draw is too tight:

To create the larger hole, all I did was cut the hole bigger with a Dremel and a thin cutting wheel. Keep the wheel centered on the existing hole and apply light pressure downward until you have an opening about double the existing size.

Take your time and do not apply too much force. And hold everything steady as the cutting wheel can walk on you if you're not careful. I held the collector tank with my fingers but I strongly suggest that you secure the tank with a clamp not only for safety but also so you can use both hands to keep the dremel steady while you make your cut. Make sure you debur and wash it thoroughly before you use it.

 

[Roxxette]

River that will be great for people that take direct hits, awesome from you to take the risk.


Sent from my iPhone using Tapatalk

 

[imeothanasis]

Thanks a lot for that info River, I am glad that you did it! I will follow your advise, its not too late. Collector tanks are not be made yet

Well it's official, the Ody/GGTS can't be any better!! I enlarged the air hole on the collector tank and now I can actually draw on the Ody as opposed to just letting the vapor collect in my mouth before I inhale. I can now utilize the air control to fine tune my draw and will definitely be doing the same to my other TS collector tank. Imeo, if it's not too late in your current production of GGTS you should double the size/length of the air hole as it truly makes a BIG difference in the adjustability of the draw...nice and airy to as tight as you want it.

For others who also feel the draw is too tight:

To create the larger hole, all I did was cut the hole bigger with a Dremel and a thin cutting wheel. Keep the wheel centered on the existing hole and apply light pressure downward until you have an opening about double the existing size.

Take your time and do not apply too much force. And hold everything steady as the cutting wheel can walk on you if you're not careful. I held the collector tank with my fingers but I strongly suggest that you secure the tank with a clamp not only for safety but also so you can use both hands to keep the dremel steady while you make your cut. Make sure you debur and wash it thoroughly before you use it.

 

[Speedjester]

Well after weeks of trying to locate a Ody V2.. I found one..now the issue is I'm missing the O ring that goes inside the ceramic before the nut... Is this required... I have a small leak could this be the cause?? This is a gift for my father (who agreed to give quiting a try)and want to set him up with no leaks and no issues... Any info would be appreciated

 

[kickitback]

check COV, i think they have a set of Ody full mode - the small ones may fit, not sure though

http://www.cloudsofvapor.com/store/...exico-only/1569-ody-full-mode-o-ring-set.html

 

[Speedjester]

Well ordered the full mode kit... Not sure what exactly that particular o ring is supposed to do?? Seller tells me it never came with one there and he brought it new..was there another design change deleting that o ring??

 

[Jagellpuff]

My new V2 Ody I bought from COV a few months back did not have the o-ring in the ceramic or between the ceramic and housing. I have not had any leak issues. I just checked the exploded view of the short and full mode, and it shows the I-ring. So I am not sure if that is a hold over from V1 or what. Hopefully Imeo or someone could shed some light on this.


Jeff "Jagellpuff" via iPhone using Tapatalk

 

[imeothanasis]

ceramic is not needed for V1 but its needed for V2 only because we can easily screw the nut inside ceramic. It has nothing to do with leakage guys

Speed, maybe you open a lot the mouthpiece buddy

 

[Speedjester]

IMEO..so I do need the O ring inside the ceramic in the V2.... What is the purpose of that O ring.... I was able to fix the leak... I didn't screw the ceramic holder far enough into the base to properly seal the the center post against the base...

Still don't understand the purpose of the o ring in the ceramic?

 

[Roxxette]

Speed that o-ring prevent you from screw the center pin too tight and breaking the ceramic, it really doesnt affect the vape experience i recently put that o-ring and didnt notice any difference and before that never had problems with leaks.


Sent from my iPhone using Tapatalk

 

[Speedjester]

Speed that o-ring prevent you from screw the center pin too tight and breaking the ceramic, it really doesnt affect the vape experience i recently put that o-ring and didnt notice any difference and before that never had problems with leaks.


Sent from my iPhone using Tapatalk

You are correct... IMEO confirmed the same in a PM he sent me.... I have to say I'm really impressed with IMEO taking the time to go through and answer these question.... .. His products and personalized customer service are top shelf.....

 

[imeothanasis]

I am glad when I can help speed, be well buddy

 

[fright88]

IMEO..so I do need the O ring inside the ceramic in the V2.... What is the purpose of that O ring.... I was able to fix the leak... I didn't screw the ceramic holder far enough into the base to properly seal the the center post against the base...

Still don't understand the purpose of the o ring in the ceramic?

It is not there for leaking purposes. It is there to make it easier to tighten or remove the nut insde the ceramic. In my expierence it also acts as a bugger against over tightening and cracking the ceramic.

 

[otrem]

thank you imeo for ody. my perfect atty. should last me a lifetime.

 

[otrem]

need another one tho for shiny purposes. dispin would be devastated to see my all day ody. lol

 

[Digitaltitan]

Can i get a penelope mouthpiece and put it in odysseus, and if i want to use a large mode ODY with a kir fanis window, do i just need the longer mouthpiece?

 

[imeothanasis]

It is not there for leaking purposes. It is there to make it easier to tighten or remove the nut insde the ceramic. In my expierence it also acts as a bugger against over tightening and cracking the ceramic.

yes, that too fright

 

[imeothanasis]

thatnk you otr.

thank you imeo for ody. my perfect atty. should last me a lifetime.

 

[imeothanasis]

No, you cant use penelope's mouthpiece on Ody digit and yes, you need the longer mouthpiece

Can i get a penelope mouthpiece and put it in odysseus, and if i want to use a large mode ODY with a kir fanis window, do i just need the longer mouthpiece?