Yeah I vape Boba's... I really wish I could dry burn a coil clean, but it never works.. always tastes nasty and burnt after...
Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
Yeah I vape Boba's... I really wish I could dry burn a coil clean, but it never works.. always tastes nasty and burnt after...
Had a question if anyone could help me out.
So I found an amazing deal on a V2 Ody in classifieds. I just wondered when the mouth piece was changed?
My ody v1 mouthpiece is the same length but the opening is different compared to my other v2 ody, which someone had pieced together. The new ody v2 i bought was bought all together, and the mouthpiece opening is the same as the other v2 ody but longer.
Hopefully the above makes sense, but it seems like there are 3 variations in ody mouthpieces.
So I found an amazing deal on a V2 Ody in classifieds. I just wondered when the mouth piece was changed?
My ody v1 mouthpiece is the same length but the opening is different compared to my other v2 ody, which someone had pieced together. The new ody v2 i bought was bought all together, and the mouthpiece opening is the same as the other v2 ody but longer.
Hopefully the above makes sense, but it seems like there are 3 variations in ody mouthpieces.
I think there were only two variations of Odysseus (short mode) mouthpieces, Odysseus V2 came with a longer mouthpiece.
BTW, Odysseus V1 short mode mouthpiece is perfect for Ithaka in micro mode.
Much appreicated. Yeah I probably should count the two that are the same length as different variations, since the only difference I notice is the mouth opening part and that could just be any slight change.
Thanks again.
Will have to keep that in mind of the micro mode, how much does that hold?
Thanks again.
Will have to keep that in mind of the micro mode, how much does that hold?
I haven't measured it yet, but I think it holds 2.5ml to 3 ml, a full tank in micro mode last me all day
Pretty cool, so about the same amount as ody then. Same here, I vape about 3 ml per day.
I haven't measured it yet, but I think it holds 2.5ml to 3 ml, a full tank in micro mode last me all day
Can you describe what you did to make this micro mode? Is it using the Ody tank with the Ithaka cap?
No, just take out the upper section of Ithaka's tank: Ithaka's base -> engraved ring -> clear window -> top cap. You will need an Odysseus short mode mouthpiece, the Odysseus V1 shortmode mouthpiece is perfect because it doesn't look too long.
I don't know if any one else has mentioned it but a Ithaka MP & Ithaka cap work very nicely on an Ody. The Ithaka small cap allows for more adjustment height required by the Ithaka MP.
I like the shorter Ody center pin with the positive nut and the Ody 510 & GG base. The Ithaka MP screws down closer to the base making it more efficient with liquid, since the gap is at the very bottom of the tank. Plus the Ithaka MP allows for more juice.
I intend to update my Odys with Ithaka parts to achieve a liquid maximized, short tank, longer MP, efficient dual coil Ody.
I like using my Ody 510 on my ChiYou since it fits snug and the ChiYou has an adjustable pin and air control, its a perfect fit. Using the Ody GG base on my GGTS with a small mod to it I can shorten the GGTS by 3/4 an inch, compared to the GGTS with an Ithaka.
The Ithaka w/510 base is perfect on my Caravela, which was collecting dust till now.
I like the shorter Ody center pin with the positive nut and the Ody 510 & GG base. The Ithaka MP screws down closer to the base making it more efficient with liquid, since the gap is at the very bottom of the tank. Plus the Ithaka MP allows for more juice.
I intend to update my Odys with Ithaka parts to achieve a liquid maximized, short tank, longer MP, efficient dual coil Ody.
I like using my Ody 510 on my ChiYou since it fits snug and the ChiYou has an adjustable pin and air control, its a perfect fit. Using the Ody GG base on my GGTS with a small mod to it I can shorten the GGTS by 3/4 an inch, compared to the GGTS with an Ithaka.
The Ithaka w/510 base is perfect on my Caravela, which was collecting dust till now.
I have to try if the Ithaka's Center Post Top Nut works on Odysseus, if it does so, it would be a great upgrade for Odyssues, since it is longer than the Odysseus one, it will prevent the leaking through the center post and I think it will provide better vapor, because it will be closer to the wick.
A thing that I have tried last night was to use the Odysseus center post in Ithaka, as I only use my Ithaka on my GGTS, I thought that if it workedit it will make the GGTS shorter, since center post is shorter, but it doesn't work, the center post upper part is not longer enough.
A thing that I have tried last night was to use the Odysseus center post in Ithaka, as I only use my Ithaka on my GGTS, I thought that if it workedit it will make the GGTS shorter, since center post is shorter, but it doesn't work, the center post upper part is not longer enough.
The difference between the Ithaka and the Ody ceramic holder is the threaded grounding protrusion on the bottom of the Ithaka ceramic holder. Remove that small piece and the two ceramic holders are interchangeable with the Ody center pin.
Yes, but that will eliminate the negative derlin nut
If the upper part of Odysseus center post was little larger, we would have a shorter GGTS (when Ithaka is on GGTS mode), negative solid connection through the derlin nut and positive connection through the positive nut that Odysseus center post provides.
If the hole in the base of the Ithaka ceramic opened up more the Ithaka ceramic nut could be turned upside down. I think this would work, I haven't compared the parts to see if Its possible. The Ithaka ceramic nut threads on to the Ody center post, that much I know.
Hello, Imeo, any ideas if you will bring any Odysseus parts back into production? I really need the stainless steel tank from the expansion pack, the one with both male sides? I really like how it looks combined with the clear section of the expansion set.
I will my dear ana. After Ithaca's batch I will make a preorder of many (if not all) pieces of GG costructions
Thanks for explaining!The difference between the Ithaka and the Ody ceramic holder is the threaded grounding protrusion on the bottom of the Ithaka ceramic holder. Remove that small piece and the two ceramic holders are interchangeable with the Ody center pin.
- Status
