only flaw in ipv2s,can i fix it?

[nic_fix]

my ipv2s is really good given what I have seen.

the cover moves around slightly. screws in until they stop before stripping. any fix?

to be fair, if I press hard on the real hana it will move a drop too. this moves more though and easy.

 

[elenamylove]

Do you have the updated version? No markings for power and up and down buttons is a sign its the newer version. I just mine yesterday and the battery cover fits snug as a bug and flush.

 

[nic_fix]

it is the newest one. ipv2s. no markings. recessed clicky butons. the cover fits right but I can grasp it and move it slightly side to side. if you screw these too tight they will strip. honestly this is fine just a minor gripe. I would not wiggle the top in normal usage. it makes sense that it would since only two screws are in the middle. try to wiggle your top.

 

[elenamylove]

The battery cover right? I tried and still not moving, strange. Did you drop it ever? That might mess up the cover and screw holes, only thing I can think of ATM. Need more coffee

 

[roxynoodle]

Sounds wonky. I have a revised ipv1, and the door and bolts are great. Can you exchange it?

You could try a tiny bit of teflon tape on the bolts.

 

[nic_fix]

it fits fine. I did not drop it. the battery cover can just be wiggled side to side a bit. the qc on these is not perfect. overall I think I got a goon one and I am pleased with it. I will try to figure out a way to fix this but it is not such a big deal. the strange thing is after I wiggle it the screws are no longer completely tight. perhaps a little thread lock since I charge usb. with blue thread lock I can still unscrew them if need be.

 

[nic_fix]

duh. I was afraid of stripping the screws. which is easy to do on these. it was just not screwed tight enough! problem fixed. I just suggest, do not torque these like a gorilla. just a tiny drop more and it is completely tight.

sorry I was so stupid.

 

[roxynoodle]

Glad you got it . I was going to suggest different, better bolts. I don't use the usb as its on the bottom. I just pull out the battery and put in a fresh one.

 

[Fictitious Character]

duh. I was afraid of stripping the screws. which is easy to do on these. it was just not screwed tight enough! problem fixed. I just suggest, do not torque these like a gorilla. just a tiny drop more and it is completely tight.

sorry I was so stupid.

I accidentally put the back of the ipv3 on not quite tight enough and I kept hearing this creaking sound when I clicked the button, I was like wth and so I tightened it up and the noise was gone. Glad your issue was similar and easily corrected.