PDIB's Making MODs!

[turbocad6]

yeah man that chamber size adjuster is just awesome, working like a charm. I just can't talk about it much until
I start an official thread and I'd like to wait till I have the logistics pinned down, otherwise it's nothing but hot air hopefully another week or so...

 

[cecsystems]

the holes are at like 4 oclock and 8 oclock assuming the v is at the bottom as you look at it rather than being symmetrical at like 3 and 9 oclock

by being offset it's possible to have only one air hole open if you wanted to run it in single coil mode. here are some pics for you.

The air holes are located at the black lines this is why my coils are angled into a V.
View attachment 307831

Thanks guys... Pictures are worth a thousand words! One other quick question... Draining? as compared to the RM2?

 

[Filthy-Beast]

Stock drains better than I thought it would with the drain above the deck on the center pin. I also have one with a lower hole drilled in the center pin and that drains as good or better than an RM2. Stock shouldn't be a problem, I'm in no hurry to drill my 2nd one lower.

 

[X-Puppy]

The dual coil setup is pretty thirsty. In that configuration the benefit of not totally draining is actually a plus. I take 2 lung hits and its time to squonk again. I can go through 3ml in an hour easy.

 

[milkman5306]

The dual coil setup is pretty thirsty. In that configuration the benefit of not totally draining is actually a plus. I take 2 lung hits and its time to squonk again. I can go through 3ml in an hour easy.

Holy vape clouds batman!

Sent from my Samsung Galaxy S4 using Tapatalk 2

 

[Mark Todd]

They have Hungarian food in the Czech Republic?

Beef Goulash is the main dish in every restaurant in Prague, walking up to the palace all the restaurant have billboards outside advertising that they have the best Goulash

 

[supertrunker]

Beats the McDonalds every 40 feet here! I swear if you drove down the main high street where i live you'd think all people did was wash their cars and eat!

Now that i come to think about it...

T

 

[sasquatchgrip]

I started wrapping a small amount of 1mm silica around the of the post and feeding this into a thin amount of 500 mesh. Thus far, all excess fluid just makes its way back up the wick, no wet hits!

 

[supertrunker]

photo please. Which end of the post? wet hits? flooding?

Confusing post to me.

T

 

[Treebeard]

I started wrapping a small amount of 1mm silica around the of the post and feeding this into a thin amount of 500 mesh. Thus far, all excess fluid just makes its way back up the wick, no wet hits!

photo please. Which end of the post? wet hits? flooding?

Confusing post to me.

T

Rodger that superT. Sasquatchgrip, please elaborate.

 

[pdib]

photo please. Which end of the post? wet hits? flooding?

Confusing post to me.

T

There was some big time flooding in Szeged, back in 1879. But I don't think there was ever any major flooding in Prague (?)

Maybe that's why your confusion.


And the lack of photos.


But, apparently, plenty of "Goulash".

According to the Scotsman, at least.

 

[supertrunker]

Oh for floods, just look at my English mates, floating like lonely turds they are, like a wick on a goulash sea, not knowing which post to tie to because there's no bloody photo!

Besides Dibby, i never had you figured for much of a cook, but i'm sure the Hungarians have a version of perogies and i like those.

My parents are smart and they retired to Scotland. You and i will never have retirement as an option.

T

 

[pdib]

You are what you eat? I don't remember eating a sexy beast this morning!

that's right! you had Perogie!

[you are a vicious perogie with a titanium skull and red laser eyes]










i don't know what came over me

 

[2pak2zero]

decided to familiarize myself with a bottom feeder while I wait for my run.


Sent from my IPAD using my wife's missing nipples!

 

[sasquatchgrip]

photo please. Which end of the post? wet hits? flooding?

Confusing post to me.

T

Hey there, sorry T. Wasn't trying to confuse.



I noticed once I got my cyclone, that the drainage wasn't great for lack of a bottom drainage hole like the RM2. Mesh always intrigued me, but it didn't wick as quick like good cotton or silica, so I wrapped some 500 mesh around a piece of 1mm silica, ran it through my .9 28g micro coil. Voilà! Wrapped the 1mm silica around the drainage post and it soaks up all the excess.



I'm just experimenting. It definitely tightened up the draw, vapes great!



Sorry for the confusion. It's carnival in NOLA!

Cheers

 

[pdib]

That's what I did with cotton on my IGO-S. I used the wire capture hole for juice entry, so I left one tail long on the cotton and let it swing around the post. What is this "silika" of which you speak?

 

[sasquatchgrip]

Also, apologies for sideways photos and the like. I'm new to forums and contain a little bit more bourbon than normal.

 

[sasquatchgrip]

That's what I did with cotton on my IGO-S. I used the wire capture hole for juice entry, so I left one tail long on the cotton and let it swing around the post. What is this "silika" of which you speak?

Was just using some of the wick that came along with my cyclone. I believe it to be 1mm silica.

 

[Katdarling]

Sorry for the confusion. It's carnival in NOLA!

Cheers

SHOW US YER........!!!!!!


Lagniappe.

 

[pdib]

decided to familiarize myself with a bottom feeder while I wait for my run.


Sent from my IPAD using my wife's missing nipples!

Why did I think you already had one?

Doesn't everybody?



Anyway, congratulations!