Ok, I did do a search, but not finding what I'm looking for...can someone point me to a list of BF attys? I want one that comes as BF, not one I have to mod to do it...thanks!
PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
these are the one I know of that are already made to be bottom feed or modded and then sold to be bottom feed, there could be others.
Chalice
Vicious Ant Divo
Vicious Ant Cyclone
Reosmods Reomizer (modified for BF by REO)
Reosmods Igo-s (modified for BF by REO)
Origen V2dripper
Aero BF (dragonfly ecigs) is a decent contender too.
ERA, graal, A7 and killer are others but I've never owned em.
ERA, graal, A7 and killer are others but I've never owned em.
+1 for RM2.
Chalices are gonna be available too in the next couple of days. Check this thread y'all:
http://www.e-cigarette-forum.com/forum/showthread.php?t=526912
If you want one with 1/16" airhole (vs the 1mm stock size) say it on his thread by the end of the day today and he'll make it 1/16" for you
+1 for RM2.
Chalices are gonna be available too in the next couple of days. Check this thread y'all:
Chalice - MarkBugs Bottom Feeder Atomiser - Official thread
If you want one with 1/16" airhole (vs the 1mm stock size) say it on his thread by the end of the day today and he'll make it 1/16" for you
Russ, besides the SS part is the Chalice better than the RM2?
I have money set aside for OliveR #2, but can't really justify spending 119 Euro at this time unless it is better.
For those of you thinking of using R41 wire, just be warned that it is a dog to work and you will need a blowtorch and pliers. But it lasts months. My RM2 has a coil in i made December last year, which gets rewicked with silica after a weekly dry burn.
It has great flavour, but not quite as much as the Terry Magic! (Mundy i mean!) You can however more easily fit it in the holes of your atty without drilling them out.
In other news, i hate time changes and drilling SS, but i managed to get the igo-w4 drilled today to bottom feed.
T
It has great flavour, but not quite as much as the Terry Magic! (Mundy i mean!) You can however more easily fit it in the holes of your atty without drilling them out.
In other news, i hate time changes and drilling SS, but i managed to get the igo-w4 drilled today to bottom feed.
T
Last edited:
Yeah, it is a steep price and It's a loaded question. Let me try to break it down:
Vape wise, the RM2 is easy to build to vape as good as a chalice. The chalice would be difficult if not impossible to load with your magic too because the way the wire is gripped - it's inserted thru the post holes and shallow groves on the tapered screws bite into the wire to hold it. The wire is the threads. I could not get mine to bite 28 ga. that's why I got 29 ga and subsequently love it on all my RBAs.
The second run chalice screws were my biggest niggle with it. I broke one using a driver and they destroyed my finger tips turning them by hand.
This run has new screws. They are beefy and accept a flat driver. They retrofit with the second run chalice too
Now for the substance. Imagine the OliveRis the vape equivalent of a Lamborghini aventador. You just don't go throwing Michelin passenger tires (RM2) on that beast. The chalice is pZero Rosso Z rated tire IMO. It is expensive because it's engineered and crafted like no other RBA you'll ever see. Like an OliveR. And It drains so well (center hole and concave deck) it'll scare ya. The OliveR deserves this IMO.
It also NEVER leaks at the 510. Just a simple oring, no wrenching no BS, no surprises.
Same for my new woodvil - the vaping equivalent of an Audi A8. No passenger tires there either. It deserves to be crowned with the best there is.
Yes, it's expensive but when it comes to rare and high performance mods it makes total sense.
My cyclones are right at home on grands and VV grand. Yep they are the All terrain tires on my on my hum vee style mods
Well - i got called to work on Saturday, so while i was waiting for the customer to pick his stuff up - i drilled a bit of it, burnt my thumb, cos it gets hot, and then the post started spinning in the atty.
So today i took the post out and held it in pliers to finish it off!
All in all it took 15 minutes spread over 3 days
T
So today i took the post out and held it in pliers to finish it off!
All in all it took 15 minutes spread over 3 days
T
Well - i got called to work on Saturday, so while i was waiting for the customer to pick his stuff up - i drilled a bit of it, burnt my thumb, cos it gets hot, and then the post started spinning in the atty.
So today i took the post out and held it in pliers to finish it off!
All in all it took 15 minutes spread over 3 days
T
If you ever get proficient at it, let me know. I will ship you a bag of attys and you keep half of the attys if you drill mine and ship them back. <- Das a good deal!
how big is this bag? Big enough to provide starter BF atties for newbies on the dibis for a spell? . . . .. . .
oh, and Trunks . . .. Rapid Tap
- Status
Similar threads
