PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
LOL
No pugs at my house, just Poms, 2 of them - very spoiled - Chihuahua's with hair.
Poms are actually pretty cool dogs to own. They're smart and energetic when it's time to play but they mellow out when playtime's over and they won't tear up your house while your at work. One of the most endearing features of a small dog is that if you feed them good food, their byproduct comes in the small tootsie roll size.
(Bonus Deal) Just got my Odin last night... I'll be drilling it out this morning... I'm really anxious to get it fired up. I've heard good things about it from Turbo and Super_X.
I was just enjoying the last recommend I followed up on from this thread. I have to say, the Reactor is really taking a solid place in my lineup. Thick juicy clouds packed with flavor. Some mornings I get really opaque cloud chaser worthy clouds. (Thank you timk)
It runs really hot but with plenty of air flow and the right drip tip it's pretty awesome. I think the same may apply with the Nuppin only with the added features of AFC and plenty of room for coils. We'll see.
Edit: Tight drip tip to right drip tip... LOL (Meagan)
Last edited:
I was just enjoying the last recommend I followed up on from this thread. I have to say, the Reactor is really taking a solid place in my lineup. Thick juicy clouds packed with flavor. Some mornings I get really opaque cloud chaser worthy clouds. (Thank you timk)
It runs really hot but with plenty of air flow and the right drip tip it's pretty awesome. I think the same may apply with the Nuppin only with the added features of AFC and plenty of room for coils. We'll see.
Edit: Tight drip tip to right drip tip... LOL (Meagan)
glad you're diggin it. the super dense vapor is my favorite part. sometimes i drool while takin a toot lol kinda gross to drool/salivate in your atty but that's how I know its awesome hahaha I did the whole vapor in a cup thing, kinda cool with an ice cold glass cup and dense thick vapor sittin in it like a liquid. but ya, the heat is intense sometimes. especially now that we're in the 100's temperature wise for a while here in ol Yakivegas.
sweet looking stuff, Glass. There's some colors in there that are much sought after. Which one are you thinking is for you? The one you shot solo?
Since the nuppin is a prototype at this point and Peter hasn't even received it yet for testing purposes... What is the anticipated lead time? Oh and is it almost time for another list? lol... If so, please add me to said list (assuming favorable testing) Val?... did you really tell GG to burn those blocks? tisk tisk... Too funny.
I hadn't intended to play the list game on the Nuppin' Atty. If everything proves out (which it should, as VH has already vaped it and, i believe, given it the thumbs up), there will be quite a few of them. I won't be mentioning the atty anywhere but in this thread (and maybe the library). I think there will be ample opportunity for dibi peeps to get one before anyone else even hears about them. Lead time: VH could speak to that, he's in charge of all the important stuff.
I wanna vape Nuppin! (Though I think I already made that clear.)
Gonna be trying MM today. Hopefully it works well
Sent from my Galaxy Note 3 via Tapatalk.
Gonna be trying MM today. Hopefully it works well
Sent from my Galaxy Note 3 via Tapatalk.
It's been pouring all day today, so no sun whatsoever here.
Val, I told you you'd get 2 great blocks for the cost of the wood and shipping, you can have ANY 2 blocks (so it was a very wise investment for you).
The WHOLE REASON I did this was because I did not want you to waste your money sending me that wood, and I did not want you thinking that I simply kept your wood... Especially after finding out that you lost your first dibi, I know that was traumatic. I'm just sorry it took so long, but it wasn't up to me, K&G took forever to do them, and my sanding experience was not fun. (If I end up with lung cancer from sanding this stuff, I will try not to hold it against you... - kidding).
That purple in the corner is breathtakingly gorgeous, better than my original dibi block for figures (but most of them are)... unfortunately... it's not wide enough for a dibi... if pdib will make allowances for width, it can make a dibi, and you can certainly have it if you still want it.
I have to run an errand right now, but when I get back, I'll try to post dimensions. I would part with some of the blocks to you guys, but give me a chance to post dimensions and better pix first, the blocks are not all big enough for Dibi, but a lot of them are. Be back in few hours.
Val, I told you you'd get 2 great blocks for the cost of the wood and shipping, you can have ANY 2 blocks (so it was a very wise investment for you
). The WHOLE REASON I did this was because I did not want you to waste your money sending me that wood, and I did not want you thinking that I simply kept your wood... Especially after finding out that you lost your first dibi, I know that was traumatic. I'm just sorry it took so long, but it wasn't up to me, K&G took forever to do them, and my sanding experience was not fun. (If I end up with lung cancer from sanding this stuff, I will try not to hold it against you...
- kidding).That purple in the corner is breathtakingly gorgeous, better than my original dibi block for figures (but most of them are)... unfortunately... it's not wide enough for a dibi... if pdib will make allowances for width, it can make a dibi, and you can certainly have it if you still want it.
I have to run an errand right now, but when I get back, I'll try to post dimensions. I would part with some of the blocks to you guys, but give me a chance to post dimensions and better pix first, the blocks are not all big enough for Dibi, but a lot of them are. Be back in few hours
.
Ok so some good news ... and some bad.
which first? ok BAD first:
I'm sorry Bry, the spit-back proof will take a while due to limited equipment and not to mention other ongoing orders. The setup for machining the drip tip will get in the way and in this business; additional setup time = additional machine time = higher cost. I promise you though that I'm constantly searching and dealing with machine shops. I always have you guys' wishes in mind.
for some GOOD NEWS:
It doesn't require additional setup and machine time for a COPPER SLEEVE!!! So we'll have SS, Brass, and Copper! .. Possibly a sand-blasted version also!
For those who don't know the difference, Copper is much softer - more malleable than Brass ( due to the mix of zinc and copper in brass )
During my early naval career, I was tasked with polishing brass and copper in the ship. In my experience, Brass takes on a golden finish when polished and Copper takes on a rose gold finish which is noticeably darker than brass.
Polished COPPER:
Polished Brass:
It it just me or does That mod and atty look bad AYuss ???
I have to admit, that does look severely good.
Ok so some good news ... and some bad.
which first? ok BAD first:
I'm sorry Bry, the spit-back proof will take a while due to limited equipment and not to mention other ongoing orders. The setup for machining the drip tip will get in the way and in this business; additional setup time = additional machine time = higher cost. I promise you though that I'm constantly searching and dealing with machine shops. I always have you guys' wishes in mind.
for some GOOD NEWS:
It doesn't require additional setup and machine time for a COPPER SLEEVE!!! So we'll have SS, Brass, and Copper! .. Possibly a sand-blasted version also!
For those who don't know the difference, Copper is much softer - more malleable than Brass ( due to the mix of zinc and copper in brass )
During my early naval career, I was tasked with polishing brass and copper in the ship. In my experience, Brass takes on a golden finish when polished and Copper takes on a rose gold finish which is noticeably darker than brass.
Polished COPPER:
Polished Brass:
that is GREAT news!
totally cool!
where'd you get the brass PacMan? Did Mr. Atari send you that? does brass PacMan have a Joystick?
Honestly, I'm so used to seeing dibis with smaller atties on 'em, it looks somewhat strange to me. What's the diameter on that thing? 22 or 23?
For laughs and to get a sense for what something like that might feel like in the real world, I just stuck a Patriot on my dibi, and my reaction didn't change; to me it just doesn't look or feel like it belongs there. Then I tried a bit more moderately sized Helios. Much better! Maybe part of of my somewhat negative reaction is that I've never really come to terms with the larger diameter drippers -- they don't seem to suit my style of vaping very well.
But if it works for you, by all means, vape on!
I am quite the opposite and since tomorrow is Friday, i decided to recoil my atomic clone and cloud chase.
Normally, i just run this stuff at weekends, but since various people are off work tomorrow, i can get away with it. I took the liberty of making a huge VG juice - it's about 85/15 vg/pg and i wrapped up some dual 26g to get to 0.3Ω. Some vapemail landed me more Orbie SX30s and Sony VTC5s.
Air holes fully open and HRH is not happy with me right now! Which somehow makes it just better.
T
Normally, i just run this stuff at weekends, but since various people are off work tomorrow, i can get away with it. I took the liberty of making a huge VG juice - it's about 85/15 vg/pg and i wrapped up some dual 26g to get to 0.3Ω. Some vapemail landed me more Orbie SX30s and Sony VTC5s.
Air holes fully open and HRH is not happy with me right now! Which somehow makes it just better.
T
- Status
Similar threads
