Penelope V2
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Other atomizers DON'T breath. I am only referring to the Penelope. This was what was brought up yes?
Hmm so the slots are reaching the base of 510 past the threads if you get what I mean. I can put an oring that can solve the issue. Its not really an issue but when I put it on just gg I want air only from 510 hole.
But It feel that it is taking most of the air from the center hole of the lid center post.
as I do feel change in draw up to a point if you use the CT AR.
Only if you restrict the air flow from the CT to much it will come via the two small
Holes in Pene' 510.
On Yankee flat 510 there is no other way so the air come via the Pene slots,
But if the 510 center post have hole in middle like the lid,then this is the most
Free path for the air to come from.
But as I said it work so up to a point when you close AR in CT to much.
That's what I think happen if I figure it correctly.
Seems that way. And if you plan on using it on a GG mod, then sure. The oring could solve that.
Air will enter from any place it can. I believe that since the holes on the air ring are larger, most will enter from there. But I believe the question was does the penny take air in on a flat cap. Te answer is yes it can. And does.
Until now,
with all builds I tried couldn't achieve on the Pene' the
TH/FL/VP I get from the Ithaka.
I dunno,sun of a gun ordered more Ithaka from Vasilis,
Now I need more new rebuildable parts.
with all builds I tried couldn't achieve on the Pene' the
TH/FL/VP I get from the Ithaka.
I dunno,sun of a gun ordered more Ithaka from Vasilis,
Now I need more new rebuildable parts.
I've come to think I'm missing the higher center post
On Penelope as I have in Ithaka (the old one)
I'm used to very short distance between coil and air hole,
And I liked that very much.
Imeo is there any chance to have a such for Penelope?
On Penelope as I have in Ithaka (the old one)
I'm used to very short distance between coil and air hole,
And I liked that very much.
Imeo is there any chance to have a such for Penelope?
I miss typed that. I meant the 2 air slots. I said pardial since they don't go all the way to the 510 connector.
There is no doubt about it in my mind that Penelope v2 works so much better on the JGG because of the airflow as opposed to other mods. I've tried it on many other mods and it's by far better on the Just. I also use it with the mouthpiece air control removed and place a shorty drip tip on. Vapor production and flavor is top notch.
Running it with a 1.4 ohm coil made from Nickel .20 non resistance/ 30 gauge kanthal resistance and double 3mm silica (double only at the coil) with a Kick2 set at 12-13 watts.
Stunning vape
Running it with a 1.4 ohm coil made from Nickel .20 non resistance/ 30 gauge kanthal resistance and double 3mm silica (double only at the coil) with a Kick2 set at 12-13 watts.
Stunning vape
double 3mm with 30 gauge 1.4 ohms? that must be low number of wraps. Why don't you try double 2mm and add to your wraps. For sure it would be better.
Managed 4 wraps and not even tight and it's a fog machine aal. I did use my wire welder though for the NR/R/NR connection
Any idea on when other misc Penelope v2 parts will be available? I know it was mentioned that they will be but I think I missed the timeline.
Post, plastics, rebuildable, etc
Post, plastics, rebuildable, etc
Hey Guys,
today is not my best day !
I unscrewed my sweet new Penny v2 from my Stealth and wondered that the center post wasn´t right.
So i took a screwdriver , like in Imeo´s Viedeo about this, but the 2 pins came right out . so i broke them by screwing them onto my Stealth, poor me.
I just got her right a few days ago, she was vaping like hell and after some builds i finally got her where i needed it.
look for yourself and please make sure you don´t end up like me and her...
now i can´t vape her until the day that there will be a center post for penny 2- and with all the work on Imeo´s mind-
i don´t know...when i can take her sweet lips to mine again......
sad Stan
today is not my best day !
I unscrewed my sweet new Penny v2 from my Stealth and wondered that the center post wasn´t right.
So i took a screwdriver , like in Imeo´s Viedeo about this, but the 2 pins came right out . so i broke them by screwing them onto my Stealth, poor me.
I just got her right a few days ago, she was vaping like hell and after some builds i finally got her where i needed it.
look for yourself and please make sure you don´t end up like me and her...
now i can´t vape her until the day that there will be a center post for penny 2- and with all the work on Imeo´s mind-
i don´t know...when i can take her sweet lips to mine again......
sad Stan
Really sorry for you stenley,
But I belive those parts will be available soon enough.
you can contact Smokguru and find out maybe they have some spare,
No harm trying,I segest to that right away.
You know I was fear from this to happen so I never did this.
And if one must maybe better to take the rebuildable part half turn open,
So it want be to tight pushing the o ring so much.
Hey but not let it down on you so much,it's fixable in short period.
But I belive those parts will be available soon enough.
you can contact Smokguru and find out maybe they have some spare,
No harm trying,I segest to that right away.
You know I was fear from this to happen so I never did this.
And if one must maybe better to take the rebuildable part half turn open,
So it want be to tight pushing the o ring so much.
Hey but not let it down on you so much,it's fixable in short period.
Not good. You wanna bigga hole, you gonna have less metal left. A 510 only has so much room to work with. 
D let me ask you. Did this just break at the base of the flaps? Got enough brass to stick out?
Are you on a JGG? Will the pins reach each other without the 510 kid hitting the 510 penny base threads?
Are you on a JGG? Will the pins reach each other without the 510 kid hitting the 510 penny base threads?
Imeo. These wings (screwdriver slot) does not have to be this deep does it? I would think a more solid piece all the way with a slight change.
No Yankee , it broke of at the end- the penny v2 pin is flat now......
Yankee is my "Hero of the day" !!!!!! Thx Bro !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i flipped the Just GG Lid's Brass Center Pin, so that it won´t touch penny2´s 510 connection and give space for the air flow. Then i put it on my GGTS because the pin is able to reach the flipped Just GG Lid's Brass Center Pin, wich now is to short to come out of the Just GG SS Lid.
It works- my Penny ist back !!!!!!!!!!!!!
i can only use it with my GGTS for now, but thats ok with me until there will be a penny center pin v2.
- Status
