Pico RTA
- Thread starter Quantum Mech
- Start date
- th_trl_thread_readers 0
- Status
It's a mimi-me mod, very nice…how many horsepowers (Clarkson would say it that way) does it have, or MAH rating ?
Oh yeah…how ya liking the Pico ?
Pico has been a surprisingly good little tank
Get a fare amount of cloud off this for the size of the air flow
Flavour good too, only downside a minor really is a little bit of juice seeped out of the afc
Battery wise the MV is a 1300mah and can run 40w which they recommend 0.8ohm and above for battery life
Although I have fired a few tanks on it as low as 0.26 with no noticeable heat build up, even chain vaping
i received mine from FT. the build quality, threading etc are top notch and buttery smooth.
IMO the vape experienced and flavor on this are similar to The Hurricane and Taifun GT II.
it gives a funny taste at the beginning while i'm using the PEEK evaporation chamber but fade away after a while.
i noticed that the juice easily get caught in my mouth while i'm vaping maybe due to the short travel distance between the coil and the drip tip which sometimes irritates me.
fruity juice are good with this. when it comes to creamy type of flavor, Kayfun 4 will be my absolute choice.
IMO the vape experienced and flavor on this are similar to The Hurricane and Taifun GT II.
it gives a funny taste at the beginning while i'm using the PEEK evaporation chamber but fade away after a while.
i noticed that the juice easily get caught in my mouth while i'm vaping maybe due to the short travel distance between the coil and the drip tip which sometimes irritates me.
fruity juice are good with this. when it comes to creamy type of flavor, Kayfun 4 will be my absolute choice.
i received my pico/atto combo a couple of weeks ago. i'm really enjoying it. do any of you know where i can get the CLR kit? i have some coils from my joyetech tron tank that i wouldn't mind trying on the Pico.
as far as being "better" than the Goblin mini? i don't know if i would say that. while it is very good, i think the Gob mini beats it out slightly in flavor, and by a mile in vapor production. if you enjoy a tighter air draw and less vapor, then the Pico is probably more your style. the Gob mini's drip tip does suck, but i threw on a stumpy derringer style drip tip and it's worked great and looks pretty good too IMO. here's a pic.
http://i104.photobucket.com/albums/m175/louconn/20160112_134804_zpscjkrvcdx.jpg
as far as being "better" than the Goblin mini? i don't know if i would say that. while it is very good, i think the Gob mini beats it out slightly in flavor, and by a mile in vapor production. if you enjoy a tighter air draw and less vapor, then the Pico is probably more your style. the Gob mini's drip tip does suck, but i threw on a stumpy derringer style drip tip and it's worked great and looks pretty good too IMO. here's a pic.
i received my pico/atto combo a couple of weeks ago. i'm really enjoying it. do any of you know where i can get the CLR kit? i have some coils from my joyetech tron tank that i wouldn't mind trying on the Pico.
as far as being "better" than the Goblin mini? i don't know if i would say that. while it is very good, i think the Gob mini beats it out slightly in flavor, and by a mile in vapor production. if you enjoy a tighter air draw and less vapor, then the Pico is probably more your style. the Gob mini's drip tip does suck, but i threw on a stumpy derringer style drip tip and it's worked great and looks pretty good too IMO. here's a pic.
http://i104.photobucket.com/albums/m175/louconn/20160112_134804_zpscjkrvcdx.jpg
My CLR adaptors came with the atty when bought from fasttech
Maybe they sell them seperatly, not looked
yah. i think if you buy the Pico clone by itself, it comes with the adapter. the atto/pico combo, i can confirm does not come with it unfortunately. i checked FT and 3FV for Pico accessories and came up empty.
I may be a little late here, the Pico I bought from 3FVape @ $24.95 came with the CLR adaptor.
I found out what the s stands for in pico-s....but It will get censored...I have no idea how this thing could ever work properly. The 510 pin shorts on the threaded most of the time, and there is no seal so all the AF comes through the 510. AFC is useless/pointless. The top of the chimney doesnt seem to seal so juice can just flowe down the chimney from the tank..Its so silly I havent even bothered trying to build it...If anyone has a pico-s and has it working, I would appreciate any insights!
I haven't had a single issue with mine, I've run through about 10 tankfuls and it hasn't gurgled or leaked a drop...don't think mine is the s model though, actually wasn't aware there was an s model.
I got this one
$22.72 Pico Styled RTA Rebuildable Tank Atomizer - 3ml / 316 stainless steel + PEI / 22mm dia. at FastTech - Worldwide Free Shipping
And its been fine, no shorts, gurgles leaks ect
Ohms have stayed solid too, currently have an SS316 build in it
$22.72 Pico Styled RTA Rebuildable Tank Atomizer - 3ml / 316 stainless steel + PEI / 22mm dia. at FastTech - Worldwide Free Shipping
And its been fine, no shorts, gurgles leaks ect
Ohms have stayed solid too, currently have an SS316 build in it
Got my Picos a couple days back and what can I say. Flavor is top notch!
Build quality is great as well. There is actually a slight change in the fit and finish around the AFC so chances are, the clones might be based of an older pico which had issues of the afc holes not aligning with the holes on the base.
Deck is a little bit of an ... to build especially with the micro chamber due to the 90 degree coil leg placement but the flavor is so intense!
Probably only downside is that the juice feed holes are a little high and you either wick your cotton out to absorb the remaining juice or tilt the tank whenever the liquid level goes below that.
Haven't had the chance to test out thr CLR gender adapters as I dont have any joyetech CLR's with me but I've heard reports of them being really good.
Here's a size comparison with my KFV4 on steamtuner's diamond kit.
Got my Picos a couple days back and what can I say. Flavor is top notch!
Build quality is great as well. There is actually a slight change in the fit and finish around the AFC so chances are, the clones might be based of an older pico which had issues of the afc holes not aligning with the holes on the base.
Deck is a little bit of an ... to build especially with the micro chamber due to the 90 degree coil leg placement but the flavor is so intense!
Probably only downside is that the juice feed holes are a little high and you either wick your cotton out to absorb the remaining juice or tilt the tank whenever the liquid level goes below that.
Haven't had the chance to test out thr CLR gender adapters as I dont have any joyetech CLR's with me but I've heard reports of them being really good.
Here's a size comparison with my KFV4 on steamtuner's diamond kit.
Looks amazing! Where did you order from?
Is that a K.loud+G I see there? I love mine, seems to have gone under the radar here at ecf, it' a shame.i received my pico/atto combo a couple of weeks ago. i'm really enjoying it. do any of you know where i can get the CLR kit? i have some coils from my joyetech tron tank that i wouldn't mind trying on the Pico.
as far as being "better" than the Goblin mini? i don't know if i would say that. while it is very good, i think the Gob mini beats it out slightly in flavor, and by a mile in vapor production. if you enjoy a tighter air draw and less vapor, then the Pico is probably more your style. the Gob mini's drip tip does suck, but i threw on a stumpy derringer style drip tip and it's worked great and looks pretty good too IMO. here's a pic.
http://i104.photobucket.com/albums/m175/louconn/20160112_134804_zpscjkrvcdx.jpg
- Status
