Precise ELA Telescoping Mod by Super-T!

[daveinleics]

err, i have never used a needle tip bottle other than the metal needle tipped bottles anyway. (do they work for filling kayfun?)
Does the kayfun come with one?
if not, where do you get those things?
thanks

and who is Kay anyway?

Best to avoid the metal needle tips with the kayfun as you can mess up the valve with them. By far the best I have found for filling them are the plastic needle tips that have a syringe type fitting - they are sold by Cloud9 in the UK and no doubt you can get them elsewhere.

 

[ukeman]

harumph! can you fill from the top? like before you put the outer tank on? kind of like a Pene?

Best to avoid the metal needle tips with the Kayfun as you can mess up the valve with them. By far the best I have found for filling them are the plastic needle tips that have a syringe type fitting - they are sold by Cloud9 in the UK and no doubt you can get them elsewhere.

 

[rojo]

harumph! can you fill from the top? like before you put the outer tank on? kind of like a Pene?

That's how I filled mine. Someone earlier (Vcoupe?) suggested filling with the top cap off, seating the top cap, lightly securing it a half turn or so, then turning upside down to finish tightening. Worked for me.

The juice bottles from tastyvapor.us are fairly stabby, so I didn't figure I'd need any different tips. Apparently they're not quite stabby enough though.

Sent from my SCH-I405 using Tapatalk 2

 

[frazzledglispa]

Alright! Got my shipping notice Friday, just checked the tracking - Dispatched to Sort Facility - if past Super T orders are any guide Wednesday should be the day. Can't wait to open the door when I get home and see the package lying on the floor where it tumbled through the mail slot.

 

[ukeman]

OK to legitimize this, I plan on using this on the ELA.... and it better be worth the whoo hoo bucks. I figure it will be if set up right for sure... right now i have a 3 wrap 28g just to try and its hot! like too hot but thats with just a few drops in there. I didn't want to try a dual coil just yet or even a twisted 30... its at .6 Ohms with a doubled piece of silica.
you know i'm gonna try it without the needle bottle....
i'll try a tank out and see if i don't add another wrap.

That's how I filled mine. Someone earlier (Vcoupe?) suggested filling with the top cap off, seating the top cap, lightly securing it a half turn or so, then turning upside down to finish tightening. Worked for me.

The juice bottles from tastyvapor.us are fairly stabby, so I didn't figure I'd need any different tips. Apparently they're not quite stabby enough though.

Sent from my SCH-I405 using Tapatalk 2

 

[ukeman]

c'mon whats you order number???...

Alright! Got my shipping notice Friday, just checked the tracking - Dispatched to Sort Facility - if past Super T orders are any guide Wednesday should be the day. Can't wait to open the door when I get home and see the package lying on the floor where it tumbled through the mail slot.

 

[frazzledglispa]

c'mon whats you order number???...

149xy

x=How To Be Invisible
y=Drawman

Test your skill!

 

[ukeman]

drama man? heheh jk, c'mon I'll show you mine..... heh

15113... ooh thats a long way from ....

David, i suggest you take a nice lonnnng break after you hit the first 200....

...........just KIDDING

149xy

x=How To Be Invisible
y=Drawman

Test your skill!

 

[Vcoupe]

wow i can't believe how fast the Kayfun got here!
ok can i use a metal tip squeeze bottle ?
off to see the great vid on setup.

beta will match the satin for sure, if its anything like the P+ satin finish.

Nooooo metal fill tips!!!!! Need plastic!

 

[thatick]

here we go with the feet again... lol

I don't question my wife's internet purchases, and she doesn't question mine. She is concerned that my pv seems to be growing for unexplained reasons though. It's a good source of "that's what she said" jokes.

Speaking of... Vape mail today!

Sent from my SCH-I405 using Tapatalk 2

 

[Freckle]

Alright! Got my shipping notice Friday, just checked the tracking - Dispatched to Sort Facility - if past Super T orders are any guide Wednesday should be the day. Can't wait to open the door when I get home and see the package lying on the floor where it tumbled through the mail slot.

147** here and still no movement on my ELA, received my tracking on the 3rd. Did you order something else?

 

[Freckle]

harumph! can you fill from the top? like before you put the outer tank on? kind of like a Pene?

I also filled from the top. I found one place with plastic tips at a reasonable price, so reasonable I couldn't justify spending 3 bucks shipping. The piece was $0.58, and they even have a 5% coupon code. I may check out a local store in my area, surely someone has something we can use.

 

[kscoggins]

I also filled from the top. I found one place with plastic tips at a reasonable price, so reasonable I couldn't justify spending 3 bucks shipping. The piece was $0.58, and they even have a 5% coupon code. I may check out a local store in my area, surely someone has something we can use.

Wonder if you can use the plastic filler needles from the first generation cartos.. bet I have a metric buttload of those around still.

 

[OnTheFidele]

And here I thought buttloads were Imperial. The public school system should really get it together...

Wonder if you can use the plastic filler needles from the first generation cartos.. bet I have a metric buttload of those around still.

 

[Covert]

Have you guys tried using the straw from say a WD40 can and drill out the dripper top of any juice bottle with a 1/16 drill bit and coat the outside with silicone? Looks to be the same diameter as those plastic tips. Just an option for you lucky Kayfun owners I want one just can't afford it lol.

 

[Freckle]

Wonder if you can use the plastic filler needles from the first generation cartos.. bet I have a metric buttload of those around still.

I have a ton of those, oh goodness my mind just went blank, plastic things you get with diy stuff. Oh I forget the name of them! PIPETTES! That is the word (had to go to my nic dealer's website to remember, ha ha). I just used one of those, and it worked. I find I don't like using that fill hole, it tends to drain back out even when I don't have it full. As soon as you stop, juice just spills all out. Maybe it was the pipette, not strong enough? I will use the top method till I figure something else out.

Never tried the plastic filler needles, it may work though.

 

[InfiniteMH]

If you already have a syringe, or a bottle cap for these, they're pretty cheap. Needles might scratch the ball bearing inside the fill hole.

 

[icucme2]

If you already have a syringe, or a bottle cap for these, they're pretty cheap. Needles might scratch the ball bearing inside the fill hole.

yess, where'd u get those

 

[Freckle]

Kayfun can be deceiving. It isn't as easy to set up the right setup as it might seem. If it doesn't perform, you probably messed up somewhere. If you encounter any problems, feel free to PM me for help

You are right! I thought I had it set it up correct but I didn't. I have been playing with this thing all day today. I just now got it set up right. Holy canoli, this sucker is pretty dern sweet! I love it! I absolutely love it!

Flavor compares to the immortalizer! I am sold, it is a keeper!

 

[InfiniteMH]

Like $9 for 100 on amazon free shipping with prime. There are also closed caps as well. I hardly use them, but keep a few extra of both with me, because I know I'll never run out. Haven't had much luck trying to find the bottle cap for 15ml bottles though. If someone knows, please let me know.