Precise ELA Telescoping Mod by Super-T!

[Nach]

I see that the extension tube and the 510 connector are one piece?

They are NOT one piece, sir.

 

[raqball]

Quick question for David,how is the Strata going to fit the ELA since I see that the extension tube and the 510 connector are one piece?
Will it only be used in 18350 mode?Does not make a difference to me just wondering.

You might have better luck getting an answer from him if you post Strata Q's in the Strata thread as the ELA thread is so big I can see where he would easily miss it..

http://www.e-cigarette-forum.com/fo...ng/481422-introducing-precise-strata-rda.html

Edit: See Nach's reply..

 

[nickvegas]

They are NOT one piece, sir.

Thanks Nach,call me Nick please how do you disassemble the 510 connector is it from the inside of the extension tube?Just unscrew the center pin? Thanks Nick.

 

[pAth77]

Thanks Nach,call me Nick please how do you disassemble the 510 connector is it from the inside of the extension tube?Just unscrew the center pin? Thanks Nick.

The 510 top cap is actually two pieces: the beauty ring (standard and adjustable airflow caps) and the actual 510 top cap. The beauty ring threads onto the 510 top cap, and the 510 top cap threads onto the extension tube. Once you have the 510 portion removed, you can then adjust/remove the center pin. The Strata will essentially replace the entire top cap section.

EDIT: Here is a link to David's video that shows how to disassemble the top cap section.

Precise ELA Hybrid Center Post. Video 2 of 5 - YouTube

 

[nickvegas]

The 510 top cap is actually two pieces: the beauty ring (standard and adjustable airflow caps) and the actual 510 top cap. The beauty ring threads onto the 510 top cap, and the 510 top cap threads onto the extension tube. Once you have the 510 portion removed, you can then adjust/remove the center pin. The Strata will essentially replace the entire top cap section.

EDIT: Here is a link to David's video that shows how to disassemble the top cap section.

Precise ELA Hybrid Center Post. Video 2 of 5 - YouTube

Thanks for the video Path,this MOD is machined so well I was going crazy just trying to figure how to take that piece out it looked like one piece to me and I would have never thought to unscrew it from the threads.

 

[Nach]

What path said...

 

[OnTheFidele]

Now that my ELA is in my hand, it feels like I've always had it.

This is my ELA tucked in her little home:

No name yet, but I'm leaning toward Pallas...

 

[Cucco]

Now that my ELA is in my hand, it feels like I've always had it.

I get that!

 

[Covert]

I don't think I could be much happier. Both of my ELA's are home and I do have to say if your thinking about sub ohm dual coil vaping the HD springs stop the button from heating up, and make your ELA into a cloud monster. Running my patriot with dual 6 wrapped 26awg micro coils on a 20 amp battery with amazing results.

 

[Cucco]

I don't think I could be much happier. Both of my ELA's are home and I do have to say if your thinking about sub ohm dual coil vaping the HD springs stop the button from heating up, and make your ELA into a cloud monster. Running my patriot with dual 6 wrapped 26awg micro coils on a 20 amp battery with amazing results.

Very Cool! Can't wait to get my #2 and #3! The HD springs stop the button from heating up? I never thought about that. I will have to try it.

 

[nickvegas]

sorry what's an HD spring???

 

[raqball]

sorry what's an HD spring???

2nd from the bottom

Super T ~ Parts & kits

It's a stiffer spring than the one that ships with the unit.

 

[vNistelrooy]

UpdAte on my effort to randomly add to cart at super t's website..damn u lady luck


Sent from my iPhone using Tapatalk

 

[raqball]

Try getting verified and post a 'wanted to buy ad' in the classifieds section here at ECF..

It's a long shot at scoring one that way, but you never know!

Good luck, I hope you are able to score one!

 

[nickvegas]

2nd from the bottom

Super T ~ Parts & kits

It's a stiffer spring than the one that ships with the unit.

thanks just ordered some.

 

[Cucco]

UpdAte on my effort to randomly add to cart at super t's website..damn u lady luck


Sent from my iPhone using Tapatalk

Hey .. Keep trying. I'm sending good thoughts your way!

 

[OnTheFidele]

I can testify about the heavy duty spring. I like it much better.

 

[tnt56]

Maybe I should get the HD spring on order. The last few post have me thinking.
(And that can be dangerous sometime).

 

[Covert]

Sorry for the late reply guys and gals lol Yep HD is just heavy duty. I was having a serious problem with arcing, and hot button, but only with dual coil atties. My train of thought was that since the HD was more than likely just made with larger gauge wire to form the spring that it would allow more energy to pass through quicker than the smaller gauge wire that the original spring is made out of. I could be wrong, but again my button doesn't heat up anymore, and my ELA seems to hit alot better than it did.

 

[snork]

Sorry for the late reply guys and gals lol Yep HD is just heavy duty. I was having a serious problem with arcing, and hot button, but only with dual coil atties. My train of thought was that since the HD was more than likely just made with larger gauge wire to form the spring that it would allow more energy to pass through quicker than the smaller gauge wire that the original spring is made out of. I could be wrong, but again my button doesn't heat up anymore, and my ELA seems to hit alot better than it did.

That's very interesting.