Precise ELA Telescoping Mod by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
What's the width of the ELA?
Also any clue when P+ 18350 will be back in stock?
Also any clue when P+ 18350 will be back in stock?
It's Sunday and they seem to be doing some kind of maintenance work so the internet banking may be lagging. I'll check it once more on Monday. If it doesn't show up, make sure you've issued the refund to the right account (don't know if that's even possible but just covering all the angles). Thanks for the info. I'll probably want to order them all satin, and I can buy extra polished rings later on, if I want to.
Just one more question. If, for example, after a year or two I send you back the ELA for refinishing, would you be able to change it's finish from Satin to Polished if I asked you? I know I've read that you can always further polish a satinized mod, but not vice versa. Although I'm not sure how the satin version looks like, it's more important to me that the mod is scratch resistant and I don't really like that mirror-like shiny finish in general, but if I change my mind I'd like to know if it's possible. Thanks
P.S. I guess it's more than one question. Sorry
Yes, the DNA20 DNA board already has a switch on it. I've been tossing around some ideas.
Dimensions approximately are as follows: At the telescopic section 21mm at the indented section on the bottom half 22 mm at the ends 24mm. Length varies from approximately 72mm to 104mm depending on battery
End of January i should have some more P+18350's.
It's Sunday and they seem to be doing some kind of maintenance work so the internet banking may be lagging. I'll check it once more on Monday. If it doesn't show up, make sure you've issued the refund to the right account (don't know if that's even possible but just covering all the angles). Thanks for the info. I'll probably want to order them all satin, and I can buy extra polished rings later on, if I want to.
Just one more question. If, for example, after a year or two I send you back the ELA for refinishing, would you be able to change it's finish from Satin to Polished if I asked you? I know I've read that you can always further polish a satinized mod, but not vice versa. Although I'm not sure how the satin version looks like, it's more important to me that the mod is scratch resistant and I don't really like that mirror-like shiny finish in general, but if I change my mind I'd like to know if it's possible. Thanks
P.S. I guess it's more than one question. Sorry
Good morning Mindtroverted, On your Kick/kiklet refund, Banks won't credit refunds on weekends (it's sunday here) but do rest assured it has been keyed by us and it was credited back to the account number you originally used to purchase it, so it should be any day now. On the finish, we don't refinish from satin to polished as we actually have remove a few thousandths of metal to actually do so, so i don't recommend it anyway. We can go from polished to satin though if you'd like.
Thank you so much for the explanation. In that case I'll settle for polished and see how things go from there. From what I've seen super-t's polished isn't as shiny as other polished mods and doesn't act as a fingerprint magnet so that should be ok. First time in a long while I'm eagerly awaiting Monday
Thank you so much for the explanation. In that case I'll settle for polished and see how things go from there. From what I've seen super-t's polished isn't as shiny as other polished mods and doesn't act as a fingerprint magnet so that should be ok. First time in a long while I'm eagerly awaiting Monday
SuperT's Satin is silky smooth.... Beautiful..
How would that work then? I'd prefer my vaping button to be on the bottom. Could that button on the DNA board be used to adjust wattage? Also, those add-ons which replace the top cap will not go together. So if I wish to use the DNA 20 module, I won't be able to use the genisis atomizer add-on, but I could use the Strata instead?
Stop doing that
I'm already uncertain as to what finish I'd like and you guys keep making me sway back and forth. Aaaargh
Stop doing that
I'm already uncertain as to what finish I'd like and you guys keep making me sway back and forth. Aaaargh
The Satin is the most durable and scratch resistance finish that SuperT offers if that will help....
Well David when i bought my last Precise Plus 18650 i said this is my last one. This makes 4 that i have and i promised myself i wouldnt buy anymore.
Well just thanks a lot now i have to buy Ela. anyway how long is preorder going to stay open as i have to wait til friday to purchase?
I mean i can easily take the bills in my wifes piggy bank but im sure you can give til friday.
Serious David and if anyone knows how long is the preorder suppossedly staying open. Thanks in advance.
This is a real beauty. i just love the sliding of the telescope piece. another pv that will never die by David.
.
Well just thanks a lot now i have to buy Ela. anyway how long is preorder going to stay open as i have to wait til friday to purchase?
I mean i can easily take the bills in my wifes piggy bank but im sure you can give til friday.
Serious David and if anyone knows how long is the preorder suppossedly staying open. Thanks in advance.
This is a real beauty. i just love the sliding of the telescope piece. another pv that will never die by David.
.
Cos-
It is not a timed preorder. David will make as many as he sells now that he is moving production in house he can make a batch every week if he needs too to keep up with demand.
It is not a timed preorder. David will make as many as he sells now that he is moving production in house he can make a batch every week if he needs too to keep up with demand.
Stop doing that
I'm already uncertain as to what finish I'd like and you guys keep making me sway back and forth. Aaaargh
I like the shiny Precise Classic P-18 the best - here it is - its not mirror shiny so all is good, to me it is not a fingerprint magnet
I'm definitely down for one of these, but probably won't be able to order until after Christmas, so I'm glad to hear about your new production situation and that this will essentially be an "in-stock" item
I just have one question:
I don't need to know all the proprietary inner workings, I respect that for the moment you need to keep that to yourself, but when you say "twist to adjust" what part exactly do you twist? I guess I just want to know how to adjust the draw from a user's perspective. I love the concept and assume this feature will work with tanks just fine?
I just have one question:
I don't need to know all the proprietary inner workings, I respect that for the moment you need to keep that to yourself, but when you say "twist to adjust" what part exactly do you twist? I guess I just want to know how to adjust the draw from a user's perspective. I love the concept and assume this feature will work with tanks just fine?
Once we get up to speed, these will be a normal stock item, however, that being said, those who pre-order are going to get it much sooner obviously. All funds collected from this pre-order are going directly into producing your ELA. In fact, i'll be ordereing up the stainless steel and brass this week for them!
I was wondering where you were.
Where's clyde?
- Status
Similar threads
