Precise ELA Telescoping Mod by Super-T!

[kscoggins]

I'm not doing too bad, just can't resist shiny new toys
I never seem to get rid of anything... I still have carts and filler and various other goodies from 2009!
I've just been spending too much over the last 8 months or so and it's been adding up to more than I *should* have been spending

 

[Freckle]

I still have a ton of cartos. I just can't get rid of them. I haven't used a carto in maybe a year and a half. Crazy the stuff we hang on to.

 

[Natural]

Was in the market for a nice mech mod that met certain criteria. Only helps that this is made in my home country and close to my neck of the woods. After reading all 111 pages, I know the ELA is the way to go. Just submitted my order and look forward to being part of the family.

 

[KiloWatts]

I'm still not sure if I want the satin or the polished. I ordered satin, but I'm having second thoughts and decision paralysis.

 

[Centurion]

This thread was/is quite lengthy. Buried somewhere in here is the suggestion that if you're unsure you should get the polished because the warranty generously includes lifetime refinishing warranty and you can't send it back to get it un-satin finished but you could get a polished one made satin. I had to pre-order yesterday finally. I kept on putting it off but the thoughtfulness of the design made me think it had the flexibility and durability to give more use than these little $30 tube mods I keep dropping once and breaking.

When I read way back in the thread about whispers of a likely rba/feed device and maybe even a new dna chip device/add-on in the future for the ELA, which would seem consistent with repurposing ideas he's apparently had for a while, I had to pull the trigger.

 

[Blix]

It will be really interesting to see how the voltage drop is compared to the other high-end mechanical mods.

 

[KiloWatts]

Buried somewhere in here is the suggestion that if you're unsure you should get the polished because the warranty generously includes lifetime refinishing warranty and you can't send it back to get it un-satin finished but you could get a polished one made satin.

That's the answer I needed. Emailed David to request an order change... hopefully it's not too much of a hassle.

 

[MikeJA]

Arrgh! Couldn't resist. Pre-order is in.

 

[Natural]

I tend to lean more satin finish.The only thing that made me go polished was earlier posts mentioning you could go from polished to satin, but not the other way around.

 

[jasl90]

I went straight for the satin. Polished mods look great when they are polished but from a practicality standpoint... I don't polish my mods and I prefer the extra grip of a textued finish.

 

[Albinon]

I, like everyone else, am anxiously awaiting my ELA. I read earlier in this thread that with the added accent rings you can use a 18500 battery without exposing the inner tube. Does anyone know if you also use the extender tube if you can use a kick with a 18500 battery without exposing the center tube?

 

[Tennovan]

I, like everyone else, am anxiously awaiting my ELA. I read earlier in this thread that with the added accent rings you can use a 18500 battery without exposing the inner tube. Does anyone know if you also use the extender tube if you can use a kick with a 18500 battery without exposing the center tube?

I believe it was mentioned that you could use a second accent ring to cover the inner sleeve when using an 18650 or 18500+Kick. Someone else may be able to clarify if I am wrong.

 

[theECB]

Finally pulled the trigger today. 1x ELA polished, 1x Brass accent rings, 1x brass velocity tip.

So, any word on the brass body giveaway details?

I'm so excited!!! Been on the sidelines for too long. Now I need to sell of one last item so I can afford a kick. Never used one but it seems just perfect for this setup.

Okay, are we there yet?? Lol.

Woohoo!!!!!!!

 

[Sathorael]

Looking forward to getting my ELA in the mail. Im super stoked I came across this mod. Saved me a boat load of money, has better features than anything else on the market, and is made in the USA! We need some video of this beast in action!

 

[~{InFaIvIoUs}~]

I, like everyone else, am anxiously awaiting my ELA. I read earlier in this thread that with the added accent rings you can use a 18500 battery without exposing the inner tube. Does anyone know if you also use the extender tube if you can use a kick with a 18500 battery without exposing the center tube?

i thnk you can run a 18500 by itself with the rings and not expose the center tube OR you can do what i plan on, running a 18350 + kick with the rings and not expose the tube at all. so the length of a 18500 is = to a 18350 + kick

 

[forcedfuel50]

I just wanted to make a quick note that i am following the threads here and see a lot of questions. I apologize that i haven't got to them in a timely manner (that goes for emails too). We've been working hard on the ELA machining and assembling of Shockwaves and i'll put aside some time tomorrow and thursday to answer many of these questions.

 

[Sathorael]

I just wanted to make a quick note that i am following the threads here and see a lot of questions. I apologize that i haven't got to them in a timely manner (that goes for emails too). We've been working hard on the ELA machining and assembling of Shockwaves and i'll put aside some time tomorrow and thursday to answer many of these questions.

Its ok forced, keep on cranking out you're works of art!

 

[rob408]

Subscribed. Hoping to get my order in this weekend.

 

[mzsazri]

Subscribed. Hoping to get my order in this weekend.

woot... so fast.. mine ordered December last year playing waiting game

 

[guy^]

what's the voltage drop for the precise ela?